Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 386 products.

Sort by:

PeakTech 2240 - Isolation Transformer, 230V 50-60Hz 500W

Isolation Transformer, 230V 50-60Hz 500W Under consideration of the high safety requirements in the service centers, schools and industry it is absolutely necessary to use AC power source. This power source is provided with a galvanic separation between primary and secondary voltage for measuring and servicing of open instruments granting a high safety standard.

$238.63

PeakTech 2275 - Electronic Load, DC 150W 360V 30A, USB

Electronic Load, DC 150W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$432.99

PeakTech 2280 - Electronic Load, DC 300W 360V 30A, USB

Electronic Load, DC 300W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$758.55

PeakTech 4145-50A - Current Clamp Adapter AC, 50A 8mm, with BNC Plug

Current Clamp Adapter AC, 50A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 50A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$118.83

PeakTech 4145-100A - Current Clamp Adapter AC, 100A 13mm, with BNC Plug

Current Clamp Adapter AC, 100A 13mm, with BNC Plug Professional measuring transducer that allows accurate measurements of currents up to 100A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$129.68

PeakTech 4145-1000A - Current Clamp Adapter AC, 1000A 52mm, with BNC Plug

Current Clamp Adapter AC, 1000A 52mm, with BNC Plug Professional measuring transducer that allows accurate measurements of high currents up to 1000A AC in conjunction with a measuring device with BNC connection. The large opening of the round measuring tongs with handle for one-hand operation and the high cable length allow measurements even at large conductor diameters at more distant measuring locations. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$194.79

PeakTech 7535 - Ceramic Fuse FF, 250mA 690V 10.3x38mm, 10 Pieces

Ceramic Fuse FF, 250mA 690V 10.3x38mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$35.70

PeakTech 1285 - Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based

Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based This newly developed 2-channel PC-based oscilloscope is perfect for mobile use with a laptop, for permanent installation in control cabinets, for industrial facilities and many other applications where a small, lightweight and powerful oscilloscope is required. The input signals can be directly transferred to the PC via USB or LAN network. By the powerful software and the many functions provided, multifarious applications in service, science and industrial areas are possible.

$465.55

Out-of-Stock

Out of stock

PeakTech 6181 - Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232

Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232 The innovative PeakTech 6181 power supply unit with color TFT display combines the advantages of a linear-controlled laboratory power supply unit with the remote control options, which have mostly been reserved by switching power supplies so far. It is operated via the graphical menu system and enables simple control and programming of its multiple features. In addition, the device is using the included PC software that allows a complete remote control. For doubling the output voltage or output current values, the two independent channels can be interconnected in serial or parallel circuit. Also a plus/minus connection of the outputs is possible.

$716.77

PeakTech 4145-3000A - Current Clamp Adapter AC, 1000A 52mm, with BNC Plug

Current Clamp Adapter AC, 3000A 160mm, with BNC Plug Professional measuring transducer that allows accurate measurements of high currents up to 3000A AC in conjunction with a measuring device with BNC connection. The large opening of the flexible measuring clamp enables measurements on large conductor diameters. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes. Suitable as an accessory for the PeakTech 4145 power analyzer For conductor diameters of max. 160 mm Power conversion: 65mV/1000A (65µΩ)

$183.94

PeakTech 6226 - Laboratory Switching Power Supply, DC 0-30V 0-10A, Digital Meters

Laboratory Switching Power Supply, DC 0-30V 0-10A, Digital Meters This switching mode power supply, due to its very handy shape and low weight, is ideal for applications in the development and education area. The current and voltage are adjusted by digital potentiometers, whereby both values can also be adjusted when the output sockets are switched off. By pressing the respective switch, the setting solution can be switched from 10mA to 100mA or 10mV to 1V. The high visibility of the display, the easy operation and low weight, as well as the slim design are excellent conditions for use in education and service area.

$135.65

Out-of-Stock

Out of stock

PeakTech 4124 - DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 2 Channels, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 2 Channels, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the easily control via the various menu functions, a wide range of integrated waveforms and the excellent price/performance ratio. In this way this generator is perfect for almost all tasks in education, research and development.

$432.99

PeakTech 3710 - R/C Pen Meter for SMD, 3 5/6 digits (5999) 11 mm

Pen Capacimeter and Ohmmeter for SMD, 3 5/6 digits (5999) 11 mm Auto scan pen meter in a set of tweezers for SMD measure precise and fast small chip components, ideal for use in the service and education fields.

$46.55

PeakTech 4121 - DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 1 Channel, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 1 Channel, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the easily control via the various menu functions, a wide range of integrated waveforms and the excellent price/performance ratio. In this way this generator is perfect for almost all tasks in education, research and development.

$367.88

PeakTech 4120 - DDS Arbitrary Waveform Generator, 1 µHz - 5MHz, 1 Channel, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 5 MHz, 1 Channel, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the easily control via the various menu functions, a wide range of integrated waveforms and the excellent price/performance ratio. In this way this generator is perfect for almost all tasks in education, research and development.

$324.47

PeakTech 4096 - Digital Graphic Benchtop Multimeter, 5 ½ digits (199999), TrueRMS, 4-wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 5 ½ digits (199999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$758.55

PeakTech 3445 - Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TRMS, Backlit (LCD, Buttons), BT, IP67

Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TrueRMS, Frequency Meter, Thermometer K, Backlit, Illuminated Function Buttons, Bluetooth, IP67 The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions. As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.

$129.68

PeakTech 9035 - Power Meter

Energy / Power Meter New designed, high-precison Energy Meter for detecting the energy consumption of electrical appliances and to calculate the total cost of the electricity consumption of a device by entering the current price. Through the integrated power factor calculation all modern electronic consumers such as switching power supplies, TVs, fluorescent lights, LED systems and of course, resistive loads such as electrical heaters and hobs are precisely measured. In addition, due to the high resolution and the low response, even very small or standby loads are measured from approximately 1W.

$16.17

PeakTech 1565 - Laboratory Switching Power Supply, DC 1-16V 0-40A, Programmable, USB

Laboratory Switching Power Supply, DC 1-16V 0-40A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles.

$357.03

PeakTech 1575 - Laboratory Switching Power Supply, DC 1-32V 0-20A, Programmable, USB

Laboratory Switching Power Supply, DC 1-32V 0-20A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels.

$357.03

Showing 1-20 of 386 item(s)