Digital Multimeters

Digital Multimeter, 3½ digit (1999) 16mm, 600V 10A DC/AC, NCV & Live-Test, K-Thermometer Despite its small size, this multimeter offers an impressive range of functions. It measures voltages up to 600 V DC/AC and is suitable for the CAT III overvoltage category, which provides additional safety. The integrated NCV voltage tester enables non-contact voltage detection, while the Live-Test reliably detects phases and neutrals as a single-pole phase tester. The 2,000-count LCD display with blue backlighting ensures that the measured values are clear and easy to read. Particularly practical: the display changes to red if, for example, measuring ranges are exceeded or the NCV voltage tester detects a voltage, which provides additional safety and clarity.

AUTO-SCAN (SMART) Digital Multimeter 3¾ digit (3999) 16mm, 600V DC/AC True-RMS, NCV, Live-Test, Cap, Freq, Temp “Smart” Auto-Scan-Range digital multimeter with state-of-the-art technology and impressive range of functions. It measures up to 600 V DC/AC, True RMS, resistance, capacitance and frequency and tests continuity and diodes, detects voltages without contact and identifies phase and neutral conductors via NCV and Live-Test functions. It automatically selects the measurement function for DCV, ACV, resistance and continuity, so there is no need to set the function or the range. The 4000-count LCD display with blue backlighting ensures clear readability of the measured values and changes to red when measuring ranges are exceeded or the NCV voltage tester detects a voltage.

Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs This clamp adaptor is a transducer, which allows to measure electrical current AC by connection with a digital multimeter. When measuring current with this clamp adaptor, it is no need to break a circuit or to affect the insulation. This adaptor with a design of finger guard, ensures user operating under condition safe.

Digital Multimeter, 3 ½ digits (1999) 12mm, Thermometer TÜV/GS approved pocket size digital multimeter in modern design. Suitable for technicians and hobbyists.

AUTO-SCAN (SMART) Digital Multimeter 3¾ digit (3999) 16mm, 600V & 10 A DC/AC True-RMS, NCV, Live-Test, Cap, Freq, Temp “Smart” Auto-Scan-Range digital multimeter with state-of-the-art technology and impressive range of functions. It measures up to 600 V & 10 A DC/AC, True RMS, resistance, capacity and frequency and tests continuity and diodes, detects voltages without contact and identifies phase and neutral conductors via NCV and Live-Test functions. It automatically selects the measurement function for DCV, ACV, resistance and continuity, so there is no need to set the function or the range. The 4000-count LCD display with blue backlighting ensures clear readability of the measured values and changes to red when measuring ranges are exceeded or the NCV voltage tester...

Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight An easy to use and safe Multimeter with integrated protection frames, pocket sized for AC/DC voltage, current and resistance measurements, and non-contact voltage detection, with built-in flashlight. This devices uses an self-resetting PTC fuse for it's mA measurement range.

Digital Mutimeter, 3 ½ digits (1999), TrueRMS Compact 3 ½ digit multimeter with protective shell, True RMS. LCD display, 3 ½ digits, max. 1999 True RMS Value Measurements DC and AC voltages up to 600V DC and AC currents up to 10 A Manual ranges Data Hold and Relative Value functions Auto shutdown Battery charge status indication Fuse in the battery compartment Sturdy double shell container Diode and continuity test Test 1.5V and 9V batteries Compliant with safety standards: EN 61010-1; CAT III 600V / CAT IV 300V Accessories: carrying case, test leads, 2 batteries AAA 1.5 V, manual

Digital Mutimeter, 3 ½ digits (1999) 27mm 3 ½ digits Multimeter developed as per safety standard CAT III 600V in compact, modern style and integrated protection frame, ideal for the education- and service-fields.

Digital Multimeter, 3 ½ digits (1999) 20mm 3 ½ digit Multimeter developed as per safety standard CAT III 600 V in modern style and integrated protection frame. Ideal for the education and service fields.

Digital Pen-Type Multimeter, 3 ½ digits (1999) 11mm, Non-contact Voltage Detection This Pen Type Multimeter is a new development according to the latest safety requirements. It provides an easy to read LCD and the rotary switch for function selection enables convenient one-handed operation and fast results. Another new feature is the non-contact voltage detector for locating voltage-carrying conductors. With the integrated overload protection and low battery indication, this meter is ideal for user in the fields of workshop, education, hobby and home applications.

Battery & Charger for PeakTech 3440 Multimeter This charger with lithium-polymer battery of the latest generation extends our Peaktech 3440 graphical Multimeter with a power supply for the service, maintenance, and repair work in the field use. Lithium-Polymer batteries combine high life time with a very low selfdischarge and memory effect. This ensures a long service life and storability without discharging of the battery.

Digital Multimeter 3 ½ digits (1999) 32mm, Frequencymeter, Transistor hFE, Thermometer K Newly developed Digital Multimeter, which is characterized by its ease of use, modern and handy design and the extensive measurement functions. Due to the high safety standard of overvoltage category CAT III 1000V and a large digital display with backlight this device is best suitable for the education, service and industrial area.

Digital Multimeter, 3 ¾ digit (3999), Automatic Range, True RMS, Contactless Detector, Capacimeter, Frequency Meter, Thermometer Compact 3 ¾ digit multimeter with protective shell, True RMS, multifunction. LCD display, 3 ¾ digit, max. 3999 True RMS Value Measurements DC and AC voltages up to 600V DC and AC currents up to 10 A Automatic or Manual Range Data Hold, Minimum and Maximum, Relative Value Auto shutdown Battery charge status indication Fuse in the battery compartment Sturdy double shell container Compliant with safety standards: EN 61010-1; CAT III 600V / CAT IV 300V Diode and continuity test Test 1.5V and 9V batteries Accessories: carrying case, test leads, 2 x AAA 1.5 V batteries, manual

Digital Multimeter, 3 5/6 digit (5999), True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3349 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.

Measurement Accessories Set This extensive collection of test accessories for the electronics area provides the best suitable measuring adapter for the desired application for each digital multimeter. In addition, these high quality clips and cables are all manufactured to the latest safety standards and provides a high safety in every application for the user. For the material, a flexible and non-slip plastic was chosen, which can also withstand the hardest kinds of usage.

Digital Multimeter 3 ½ digits (1999) 38mm, Frequency Meter, Thermometer K Digital-Multimeter of modern design, integrated protection frame and backlight. The 38 mm Jumbo-display is ideal in the field of education and servicing.

Digital Multimeter 3 3/4 digits (3999) 27mm, Autorange, Frequencymeter, Thermometer K The new PeakTech 2015A offers a multitude of measuring functions for electrical measured variables for every user from industry, trade, training, hobby and the laboratory. The PeakTech 2015 A can be used to measure DCV, ACV, DCA, ACA, resistance, capacity, diode, transistor, continuity, temperature and frequency, thus creating a wide range of applications. Due to the high overvoltage category CAT III up to 1000V, you can use this device safely on electrical installations and systems.

Measurement Accessories Set This accessory set was specially put together for the training and laboratory area and includes a practical collection of 4 mm cables with banana plugs, test probes and connection terminals which are ideal for connecting electronic loads and laboratory power supplies. The double-insulated plastic parts are made of flexible and durable material.

Digital Multimeter 3 ¾ digits (3999) 36mm, Frequency Meter, Thermometer K Digital-Multimeter of modern design, integrated protection frame and backlight. The 36mm Jumbo-display is ideal in the field of education and servicing.

Digital Multimeter, 3 5/6 digit (5999), AutoRange, True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3350 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.