Cart (empty) 0

New products

All new products

Best sellers

All best sellers

New products

New

PeakTech 4300 - Clamp Adaptor DC/AC for Multimeter, 1000 A, 57 mm, with 4 mm Plugs

Clamp Adaptor DC/AC for Multimeter, 1000 A, 57 mm, with 4 mm Plugs A transducer which, in connection with a multimeter, allows measurements up to 1000 A DC/AC with frequency up to 400 Hz. Current measurements using a clamp transducer do not cause circuit interruptions. The transducer clamp is equipped with a hand edge protection, which ensures safe work. Measurements can be performed on cables with a diameter up to 57 mm or on bars up to 70 mm x 18 mm. The output voltage is 1 mV / A (1000:1) with the multimeter's input impedance & gt; 1 MΩ.
$79.05
New

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values ​​and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values ​​are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.
$83.84
New

PeakTech 5610B - High Performance IR-Thermal Imaging Camera, 220 x 160 pixels, -20 °C to +400 °C

High performance IR camera for thermal imaging, 220 x 160 pixels, -20 ° C to +400 ° C Versatile thermal imaging camera with a resolution of 220x160 thermal pixels, which makes temperature differences easily recognizable. Particularly suitable for detecting thermal bridges, leaks in systems and pipes, for tracing heating pipes in walls and in floors, for finding bad electrical contacts and prevent the risk of fires due to overheating. Five different color palettes for thermography and five modes of overlaying the photo in the visible, allow the user to easily identify thermal anomalies. The analysis software is stored in the internal memory of the device and can be installed at any time on a connected PC.
$574.55
New

PeakTech 7035 - Pair of Cables with Crocodile Clips for Low Voltage Laboratory Power Supplies

Pair of Cables with Alligator Clips for Low Voltage Laboratory Power Supplies These cables with 4 mm banana plugs are suitable for use in SELV / PELV low voltage circuits and are therefore particularly suitable for low voltage laboratory power supplies. At one end they have a 4mm banana plugs, each both male and female (stackable) not insulated, at the other end they have an alligator clip to connect the load.
$10.68
New

PeakTech 7045 - Pair of Stackable Cables for Low Voltage Laboratory Power Supplies

Pair of Stackable Cables for Low Voltage Laboratory Power Supplies These cables with 4 mm banana plugs are suitable for use in SELV / PELV low voltage circuits and are therefore particularly suitable for low voltage laboratory power supplies. At both ends they have 4 mm banana plugs, each both male and female (stackable), not insulated.
$11.87
New

PeakTech 7055 - BNC Female to 4mm Sockets Adapter

BNC Female to 4mm Sockets Adapter This adapter has a connector BNC male and two 4mm sockets It is intended to connect oscilloscopes and test accessories with 4mm banana plugs, such as current clamp adapters. This accessory is ideal for use in the service and educational sector.
$16.67
New

PeakTech 8201 - Measurement Accessories Set

Measurement Accessories Set This accessory set was specially put together for the training and laboratory area and includes a practical collection of 4 mm cables with banana plugs, test probes and connection terminals which are ideal for connecting electronic loads and laboratory power supplies. The double-insulated plastic parts are made of flexible and durable material.
$59.85