
PeakTech 4145-1000A - Current Clamp Adapter AC, 1000A 52mm, with BNC Plug
Current Clamp Adapter AC, 1000A 52mm, with BNC Plug
Professional measuring transducer that allows accurate measurements of high currents up to 1000A AC in conjunction with a measuring device with BNC connection.
The large opening of the round measuring tongs with handle for one-hand operation and the high cable length allow measurements even at large conductor diameters at more distant measuring locations.
This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.



Current Clamp Adapter AC, 1000A 52mm, with BNC Plug
Professional measuring transducer that allows accurate measurements of high currents up to 1000A AC in conjunction with a measuring device with BNC connection.
The large opening of the round measuring tongs with handle for one-hand operation and the high cable length allow measurements even at large conductor diameters at more distant measuring locations.
This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.
- Also suitable as an accessory for the PeakTech 4145 power analyzer
- For conductor diameters of max. 52mm
- Cable length: approx. 290cm
- Power conversion: 1mV/A (1mΩ)
- Accuracy class: IEC 60044-1 @ 1%
Current | 0.5 ... 1000A AC |
Frequency | 50/60 Hz nominal (40Hz - 1kHz max.) |
Accuracy | ± 1% (48-65Hz / 25°C ± 3°C) |
Burden Resistance | < 10Ω |
Max. non-destructive current | 2000A |
Safety | CAT III 600V |
Dimensions (WxHxD) | 110x215x45mm3 |
Weight | 700g |
10 other products in the same category:

PeakTech 4145-5A - Current Clamp...

PeakTech 7010 - Pair of Double...

PeakTech TKS-2 - Pair of Test...

PeakTech Tasche 2 - Universal...

PeakTech TKS-4 - Pair of Test...

PeakTech 7020 - Pair of Test...

PeakTech 7015 - Pair of...

PeakTech 7005 - Pair of Test...

PeakTech TKS-8 - Pair of Test...
