PeakTech 4096 - Digital Graphic Benchtop Multimeter, 5 ½ digits (199999), TrueRMS, 4-wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 5 ½ digits (199999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB

Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency.
It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions.
It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

• 5 ½ digits (199999) 4" TFT-Graphics Display 480x320 Pixels
• Up to 150 measurments per second
• Datalogger with 8 MB internal memory or external memory (USB disk)
• Recording on internal memory up to 1 million points
• Recording on external USB memory up to 100 million points
• Sampling range from 5mS to 1000S
• True RMS measurement up to 100 kHz
• Automatic or manual range selection
• Measurement of MIN / AVG / MAX / REL values
• Minimum, maximum and measured value hold function
• Measurement in dB and dBm for AC and DC voltages
• Simultaneous measurement of two quantities, for example AC voltage and frequency
• Resistance Measurements with 2 or 4 Terminals
• Diode Test and Continuity Test
• Temperature measurements with thermocouple or resistance sensors (RTD), compatible with sensors: B / E / J / K / N / R / S / T or PT100 / PT385
• RS-232, LAN and USB interfaces
• Device-control and data acquisition via SCPI Protocol
• Safety: EN 61010-1; CAT I 1000V / CAT II 600V
• Accessories: power cable, USB cable, CD-ROM, test-leads, temperature probe, manual