Digital Capacity Tester, 3 ½ digits, 8/80/800Hz
Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.
Pen Capacimeter and Ohmmeter for SMD, 3 5/6 digits 11 mm max. 5999
Auto scan pen meter in a set of tweezers for SMD measure precise and fast small chip components, ideal for use in the service and education fields.
Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.
An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed.
Output of automatic test voltage from 0 to 300V
3 digit LED display of the output voltage
Test of individual LEDs or LED panels
Test of Zener Diodes
Test the withstand voltage of Electrolytic Capacitors
Robust plastic housing
Safety: EN 61010-1
Accessories: Carrying case, Test Leads, Power Cable, Operation Manual
Multifunction Tester LCR, 3 ½ digits (1999) 20mm, Frequency Meter, Thermometer K
Digital Multifunction Tester with advanced design, multiple functions, novel figuration, large display screen and reliable performance. This meter is fully capable to measure voltage and current both AC and DC, resistance, capacitance, inductance, temperature, frequency, diode test, transistor hFE and continuity test, TTL LOGIC level measurement. Some special functions such as holding the measured data and maximum value, displaying polarity, units icons and full overloading protection, automatic power off are the most imported features.
LCR Meter, 4 ½ digits, 100 Hz - 1 kHz
This digital LCR meter is our newest development and features a large 4 ½ digit LCD display (max 11000), which provides a fast and accurate reading of measured values. The meter is capable of measuring up to 110 mF, which is very useful when testing capacitors in audio equipment or in the area of amateur radio. Inductance (coils) can be measured up to 20 H and resistors up to 110 MΩ. Additionally, the device includes a diode and continuity test. Through the simple operation and the technical capability of this LCR meter, it is the ideal tool in the service and repairs.
Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer
This combined handheld digital multimeter and LCR meter can be used universally for the service and maintenance sector, due to its high versatility. Large 3 5/6-digits liquid-crystal display (max. 5999) with an analog bargraph and backlight illumination. In addition to the multimeter functions such as voltage, current and frequency measurement, this machine also has measurement functions for inductance, capacitance and resistance. As additional feature, temperatures can be measured with the enclosed K-type probe. For professional use in the field, this device is IP67 dust, & water proof against short-time immersion, and thus naturally also protected against rain and spray.
LCR-Meter, 4 ½ digits, 120 Hz - 1kHz, RS-232C Interface, USB Converter
Digital LCR meter with 4 ½ digits dual multifunction LCD-display and backlight. The dual display feature permits simultaneous measurements. Components can be measured in the series or parallel mode and the LCR-meter is auto or manual ranging.
LCR-ESR Meter, 4 ½ digits, 100 Hz - 100 kHz, with USB interface
This newly developed digital LCR meter with ESR (equivalent series resistance) is equipped with many functions and is, by its compact design, ideal both for component testing in the workplace, as well as for service and maintenance. The illuminated multifunction display with bargraph and high measurement frequency of up to 100 kHz allows a highly precise work. With the included PC software it is possible to store and evaluate the measured values.