Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 37 products.

Sort by:

5305A - pH-Meter and Thermometer (2-in-1)

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.

$36.79

PeakTech 7400 - Carrying Case for Oscilloscopes 380 x 210 x 140 mm

Carrying Case for Oscilloscopes 380 x 210 x 140 mm 3 Practical carrying case particularly suitable for oscilloscopes or other devices of similar shape. On the front it has a pocket for measuring accessories, eg. the probes and power cables. Sturdy and with high quality padding for maximum protection of the measuring instrument. Handle and shoulder strap to carry it comfortably and safely.

$37.87

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...

$45.47

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1)

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.

$46.55

PeakTech 3350 - Digital Multimeter, 3 5/6 digits (5999) 22mm, AutoRange, TrueRMS, Capacimeter, Frequency Meter, Thermometer K

Digital Multimeter, 3 5/6 digit (5999), AutoRange, True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3350 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.

$51.98

PeakTech 3432 - Multi-Function Fuse Locator, with NCV Detector and RCD Tester

Multi-Function Fuse Locator, with NCV (Non Contact Voltage) Detector and RCD (Residual Current Device) Tester The PeakTech 3432 is a multi-function measuring device which locates fuses in a circuit, detects the presence of voltage, tests RCD devices. It consists of a combination of a transmitter and a receiver. Both are used to locate the fuses, the receiver alone is used to detect voltages and the transmitter alone, plugged into an outlet, is used to test the RCDs. This combination of functions of the PeakTech 3432 simplifies a lot the work of an experienced electrician as well as of a novice user.

$54.15

5307 - 4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature

4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature This 4 in 1 meter with one-hand operation measures: - The pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids; - The conductivity EC in µS/cm is via two electrodes on the sensor head; - The TDS value for the total dissolved solids;. - The liquid temperature, displayed simultaneously on the second line of LCD display that is permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS and Temperature measurement.

$54.15

PeakTech 3204 - Galvanometer with Central Zero DC, ±100mV ±50µA/5mA

Galvanometer with Central Zero DC, ±100mV ±50µA/5mA This new galvanometer moves the pointer relative to the direct current between the positive and negative side of the scale and thus can show the current flow.

$59.58

PeakTech 3203 - Analog Ammeter DC/AC, 5-500mA/10A

Analog Ammeter DC/AC, 5-500mA/10A This analog ammeter provides a clear current display in DC and AC range.

$59.58

PeakTech 3202 - Analog Voltmeter DC/AC, DC 20kΩ/V 0.1-500V

Analog Voltmeter DC/AC, DC 20kΩ/V 0.1-500V This analog voltmeter provides a clear voltage display in DC and AC voltage range.

$59.58

PeakTech 3201 - Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A

Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A Ranges of voltages in DC from 0.1 V to 500 V. Ranges of voltages in AC from 10 V to 500 V. Ranges of currents in DC from 50 μA to 10 A. Ranges of resistances at center of scale from 20 Ω to 2 MΩ. This analog Multimeter has a wide range of measurement functions, including AC and DC voltages, DC-current, a resistance measurement with continuity tester and a dB measurement.

$59.58

PeakTech 3410 - Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K

Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K Innovative 3 5/6-digits Digital Multimeter with 20mm LCD, function symbols, backlight and max. display 6000. This PeakTech 3410 leaves nothing to be desired. Rotary switch and push button keys for convenient one-hand operation. Automatic range selection and functional excellency make this multimeter ideal for any service and education purpose.

$59.58

PeakTech 2030 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS The PeakTech 2030 was developed for professional use, it has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$71.51

PeakTech 3415 - Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K, USB

Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K, USB Interface Multimeter designed with high safety standard featuring modern style, integrated protection frame. The 3 5/6 digit, 20mm LCD-display (max. 5999) with function symbols and backlight guarantee exact data aquisation. Optical USB standard serial port is equipped with this meter for easy connection with PC to realize macro recording and monitoring, capture of transient dynamic datas. The basic functions can be selected by a rotary switch easily and automatic range selection for DCV, ACV, DCA, ACA, Ohm, diode, continuity, frequency, capacitance and temperature measuring function.

$75.85

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.

$75.85

PeakTech 5055 - Digital-Sound Level Meter 3 ½ digit

Digital-Sound Level Meter, 3 ½ digit This digital sound level meter with 3 ½ digit 17 mm LCD display and function symbols offers manual range selection in 2 measuring ranges from 35 to 100 dB and from 65 to 130 dB, with a resolution of 0.1 dB. The fast / slow switching as well as the measured value and maximum value holding function and the internal circuit for checking the calibration (94 dB) emphasize the versatility of this device.

$80.20

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.

$80.20

PeakTech 2035 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2035 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$82.37

PeakTech 3443 - Digital Multimeter 3 5/6 digits (5999) 18mm, Bargraph, 1000 V DC/AC, Backlit, Illuminated Buttons, IP67

Digital Multimeter 3 5/6 digits (5999) 18mm, Bargraph, 1000 V DC/AC, Frequency Meter, Thermometer K, Backlit, Illuminated Function Buttons, IP67 The PeakTech 3443 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions. As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.

$83.45

PeakTech 4980 - Dual-Laser-Pointer IR-Thermometer -50 +800 °C

Dual-Laser-Pointer IR-Thermometer, -50 to +800 °C * Not suitable for human body temperature measurement * New innovative IR-Thermometer allows non-contact (infrared) temperature measurements at the touch of a button. The built-in dual laser pointer increases target accuracy while the backlight LCD and handy pushbuttons combine for convenient, ergonomic operation. These non-contact infrared thermometers can be used to measure the temperature of objects surface that is improper to be measured by traditional (contact) thermometers such as moving objects, the surface with electricity current or the objects which are uneasy to be touched.

$86.71

Showing 1-20 of 37 item(s)