Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 36 products.

Sort by:

PeakTech 3432 - Multi-Function Fuse Locator, with NCV Detector and RCD Tester

Multi-Function Fuse Locator, with NCV (Non Contact Voltage) Detector and RCD (Residual Current Device) Tester The PeakTech 3432 is a multi-function measuring device which locates fuses in a circuit, detects the presence of voltage, tests RCD devices. It consists of a combination of a transmitter and a receiver. Both are used to locate the fuses, the receiver alone is used to detect voltages and the transmitter alone, plugged into an outlet, is used to test the RCDs. This combination of functions of the PeakTech 3432 simplifies a lot the work of an experienced electrician as well as of a novice user.

$54.15

PeakTech 2030 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS The PeakTech 2030 was developed for professional use, it has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$71.51

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.

$75.85

PeakTech 5055 - Digital-Sound Level Meter 3 ½ digit

Digital-Sound Level Meter, 3 ½ digit This digital sound level meter with 3 ½ digit 17 mm LCD display and function symbols offers manual range selection in 2 measuring ranges from 35 to 100 dB and from 65 to 130 dB, with a resolution of 0.1 dB. The fast / slow switching as well as the measured value and maximum value holding function and the internal circuit for checking the calibration (94 dB) emphasize the versatility of this device.

$80.20

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.

$80.20

PeakTech 2035 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2035 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$82.37

PeakTech 3443 - Digital Multimeter 3 5/6 digits (5999) 18mm, Bargraph, 1000 V DC/AC, Backlit, Illuminated Buttons, IP67

Digital Multimeter 3 5/6 digits (5999) 18mm, Bargraph, 1000 V DC/AC, Frequency Meter, Thermometer K, Backlit, Illuminated Function Buttons, IP67 The PeakTech 3443 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions. As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.

$83.45

PeakTech 2175 - LCR Meter, 4 ½ digits, 100 Hz - 1 kHz

LCR Meter, 4 ½ digits, 100 Hz - 1 kHz This digital LCR meter is our newest development and features a large 4 ½ digit LCD display (max 11000), which provides a fast and accurate reading of measured values. The meter is capable of measuring up to 110 mF, which is very useful when testing capacitors in audio equipment or in the area of amateur radio. Inductance (coils) can be measured up to 20 H and resistors up to 110 MΩ. Additionally, the device includes a diode and continuity test. Through the simple operation and the technical capability of this LCR meter, it is the ideal tool in the service and repairs.

$86.71

PeakTech 1700 - Fork Ammeter for AC, 3 5/6 digits 13mm, 200A 16mm, True RMS

Fork Ammeter for AC, 3 5/6 digits 13mm, 200A 16mm, True RMS PeakTech 1700 fork ammeter for AC allows the user to carry out quick and effective current measurements in areas that are difficult to access. Examples of this are measurements on terminal blocks in control cabinets or individual wires / lines on electrical devices. With accurate voltage, resistance and capacitance measurement, diode and continuity testing, the PeakTech 1700 can cover the most important areas of common electrical measurements. The backlit LCD display, the buttons and rotary switch illuminated and the integrated LED flashlight allow to carry out the required measurements, even in darker places.

$96.47

PeakTech 3444 - Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TRMS, Backlit (LCD, Buttons), IP67

Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TrueRMS, Frequency Meter, Thermometer K, Backlit, Illuminated Function Buttons, IP67 The PeakTech 3444 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions. As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.

$102.55

PeakTech 4390 - Digital Multimeter, 3 5/6 digits (5999) 21 mm, Bargraph, TRMS, Frequency Meter, Thermometer K, USB

Digital Multimeter, 3 5/6 digits 21 mm, Bargraph, TRMS, Frequency Meter, Thermometer K , USB Compact Digital Multimeter with 3 5/6 digit multifunction display, 63 segments analogue bargraph and integrated USB interface for easy connection with computer to realize macro recording, monitoring and capture of transient dynamic data. Full input protection, backlight, and easy operating for choosing several measurement functions with the help of the clear view push button section. The True RMS AC voltage and current readings are other most important features of this new constructed multimeter.

$102.98

PeakTech 5035 - 4 in 1 Multifunction Environment Tester

4 in 1 Multifunction environment tester This meter has been designed to combine the functions of Sound Level, Light Meter, Humidity Meter and Temperature Meter. It is an ideal Multi-Function Environment Meter Instrument with scores of practical applications for professional and home use. The Sound Level functions can be used to measure noise in factories, schools, offices, airports, home, etc. checking acoustics of studios, audiotoriums and hi-fi installations. The Light functions is used to measure illuminance in the field. It is fully cosine corrected for the angular incidence of light. The light sensitive component used in the meter is a very stable, long life silicon diode. The Humidity / Temperature use a humidity / semiconductor sensor and K type thermocouple.

$107.98

PeakTech 2180 - Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer

Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer This combined handheld digital multimeter and LCR meter can be used universally for the service and maintenance sector, due to its high versatility. Large 3 5/6-digits liquid-crystal display (max. 5999) with an analog bargraph and backlight illumination. In addition to the multimeter functions such as voltage, current and frequency measurement, this machine also has measurement functions for inductance, capacitance and resistance. As additional feature, temperatures can be measured with the enclosed K-type probe. For professional use in the field, this device is IP67 dust, & water proof against short-time immersion, and thus naturally also protected against rain and spray.

$108.41

PeakTech 4145-5A - Current Clamp Adapter AC, 5A 8mm, with BNC Plug

Current Clamp Adapter AC, 5A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 5A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$108.41

PeakTech 2040 - Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2040 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 20.000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$114.92

PeakTech 4145-50A - Current Clamp Adapter AC, 50A 8mm, with BNC Plug

Current Clamp Adapter AC, 50A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 50A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$118.83

PeakTech 3445 - Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TRMS, Backlit (LCD, Buttons), BT, IP67

Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TrueRMS, Frequency Meter, Thermometer K, Backlit, Illuminated Function Buttons, Bluetooth, IP67 The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions. As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.

$129.68

PeakTech 4145-100A - Current Clamp Adapter AC, 100A 13mm, with BNC Plug

Current Clamp Adapter AC, 100A 13mm, with BNC Plug Professional measuring transducer that allows accurate measurements of currents up to 100A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$129.68

PeakTech 1655 - Clamp Meter DC/AC, 4 ¾ digits 11mm, Bargraph, 400-1500A 52mm, True RMS

Clamp Meter DC/AC, 4 ¾ digits 11mm, Bargraph, 400-1500A 52mm, True RMS, Frequency Meter, Thermometer This professional digital clamp meter for measurements up to 1500A AC/DC provides a rugged, rubberized and ergonomically shaped case that ensures a safe handling during the measurement and also suitable for use in industrial applications. The integrated voltage detector enables the detection of live wires and the clamp meter includes inrush current measuring function for measuring the maximum currents, i.e. of electrical motors.

$130.11

PeakTech 3441 - Digital Multimeter 4 5/6 digits (59999) 14mm, Bargraph, 1000V DC/AC, TRMS, Frequencymeter, Thermometer K,Backlit

Digital Multimeter 4 5/6 digits (59999) 14mm, Bargraph, 1000V AC/DC, TRMS, Frequencymeter, Thermometer K, Backlit The new PeakTech 3441 is a practical digital multimeter for heavy duty use with a high variety of useful measurement functions. By keystroke, the display of the device can be switched between 3 5/6-digit LCD and a high resolution 4 5/6-digit LCD, whereas all measurements are gathered as True RMS values. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this new developed device has a 4-20mA current loop measurement, low-pass filter and an Auto-Hold function, among many other things.

$136.19

Showing 1-20 of 36 item(s)