Cart (empty) 0

PeakTech 2040 - Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

2040
$114.92

Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

The PeakTech 2040 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software.
It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged.
The device has an inverted LCD display with 20.000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test.
Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

Available
Security HTTPS protocol
Fast shipment worldwide
At your service 365 days a year

Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

The PeakTech 2040 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software.
It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged.
The device has an inverted LCD display with 20.000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test.
Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

  • True RMS measurement of ACV & ACA values
  • 4 1/2 digit inverted LCD display with backlight
  • USB Interface for data recording
  • Measurements up to 1000V and 10A (20A max.) AC / DC
  • Automatic and manual range selection
  • Duty cycle, min/max and relative value function
  • Temperature measurements for type K probes
  • Auto Power Off and battery indication
  • Safety: EN 61010-1; CAT III 1000 V / CAT IV 600 V
  • Accessories: carrying case, test leads, temperature probe, software, USB cable, battery, user manual
DC V 200 mV / 2 / 20 / 200 / 1000 V; 10 µV ± (0.05 % + 10 digits)
AC V 200 mV / 2 / 20 / 200 / 1000 V; 10 µV ± (0.08 % + 25 digits)
DC A 200 µA / 2 / 20 / 200 mA / 10 A; 10 nA ± (0.8 % + 10 digits)
AC A 200 µA / 2 / 20 / 200 mA / 10 A; 10 nA; ± (2 % + 5 digits)
Ohm 200 Ω / 2 / 20 / 200 kΩ / 2 / 20 MΩ; 10 mΩ; ± (0.8 % + 5 digits)
Capacity 20 / 200 nF / 2 / 20 / 200 µF / 2 / 20 mF; 1 pF; ± (3.5 % + 20 digits)
Frequency 200 Hz / 2 / 20 / 200 kHz / 2 / 20 MHz; 10 mHz; ± (0.5 % + 4 digits)
Temperature -20°C to +1000 °C; 0.1°C ± (1 % + 50 digits)
Operating voltage 9 V Battery
Dimensions (WxHxD)   101 x 201 x 68 mm3
Weight 496 g (Battery included)

Download

Manual 2040 DE-EN

PeakTech_2040_11-2021_DE-EN.pdf

Download (1.04M)

Manuel 2040 FR

PeakTech_2040_09-2021_FR.pdf

Download (837.84k)