Cart (empty) 0

PeakTech 6227 - Laboratory Switching Power Supply, DC 0-60V 0-6A, max 150W, Multifunction Digital LCD Display

6227
$124.80

Laboratory Switching Power Supply, DC 0-60V 0-6A, max 150W, Multifunction Digital LCD Display

Laboratory switching power supply with adjustable output voltage from 0 to 60 V DC and current from 0 to 6 A, with maximum continuous power of 150 W.
The output can be turned on or off and the voltage and current values ​​are displayed in blue on the LCD display.
The voltage and current settings can be made even when the output is turned off.
This power supply also supplies voltage, according to the USB standard, to two type A ports on the front panel.
This output can also be activated or deactivated and the voltage and current values ​​are displayed in green on the LCD display.

Available
Security HTTPS protocol
Fast shipment worldwide
At your service 365 days a year

Laboratory Switching Power Supply, DC 0-60V 0-6A, max 150W, Multifunction Digital LCD Display

Laboratory switching power supply with adjustable output voltage from 0 to 60 V DC and current from 0 to 6 A, with maximum continuous power of 150 W. The maximum current that can be set is automatically limited so as not to exceed the maximum power of 150 W.
The output can be turned on or off and the voltage and current values ​​are displayed in blue on the LCD display.
The voltage and current settings can be made even when the output is turned off.
They are performed with a knob with digital encoder and by pressing on it you pass from coarse to fine resolution, respectively in steps of 1 V or 10 mV and 100 mA or 1 mA.
This power supply also supplies voltage, according to the USB standard, to two type A ports on the front panel.
This output can also be activated or deactivated and the voltage and current values ​​are displayed in green on the LCD display.

  • Blue LCD display which indicate voltage and current of the main output
  • Green LCD display which indicate voltage and current of the USB output
  • Constant voltage mode
  • Constant current mode
  • Constant power mode (150W)
  • Adjustable voltage from 0 to 60 V
  • Current settable from 0 to 6 A (if not limited by the maximum power)
  • Pre-selection of voltage and current with disabled output
  • Short circuit, overload and overheating protection
  • Safety: EN-61010-1
  • Accessories: power cable, output cables, manual
Output voltage 0 to 60 V
Output current 0 to 6 A
Output power 150 W maximum
Line regulation ≤ 0.1% ±3 mV; ≤ 0.2% ±3 mA
Load regulation ≤ 0.01% ±5 mV; ≤ 0.5% ±5 mA
Ripple & noise ≤ 5 mV rms; ≤ 20 mA rms
Display accuracy  ±(0.5% + 5 digit)
Voltage resolution 10 mV
Current resolution 1 mA
Protections overload, overheating, short circuit
Supply voltage 115/230 V AC externally switchable; 50/60 Hz
Dimensions (WxHxD)   80 x 160 x 260 mm3
Weight 1.6 kg

Download

Manual 6227 DE-EN

PeakTech_6227_07-2019_DE-EN.pdf

Download (1.03M)

Manuel 6227 FR

PeakTech_6227_07-2019_FR.pdf

Download (861.02k)

Manuale 6227 IT

PeakTech_6227_02-2023_IT.pdf

Download (870.01k)