PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall

The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls.
The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits.
The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

• LED light (green, yellow, red) with acoustic signal
• Measuring depth up to 120mm, depending on the material
• Display of the distance from the detected material
• Inverted LCD display 6cm with lighting
• IP 54 water and dust protected
• Metal / Electricity mode to find metal or electricity
• Wood mode button for finding wood
• Hand strap for optimal transport of the device
• Automatic switch-off after 5 min.
• Self-calibration when switching on
• Detection of ferrous and other metals
• Accessories: carrying case, 9 V battery, manual