Panier (vide) 0

Meilleures ventes

Toutes les meilleures ventes

PeakTech 3433 - Détecteur de Matériaux dans un Mur

3433
48,72 $US

Détecteur de Matériaux dans un Mur

Le scanner PeakTech 3433 détecte le bois, le métal ou les conducteurs électriques sous tension dans les murs pour éviter les dommages causés par le burinage, la coupe ou le perçage des murs.
L'écran LCD inversé indique la distance du matériau détecté et aide à évaluer l'état interne de le mur pour éviter d'endommager les canalisations, circuits électriques sous tension ou autres.
La profondeur de détection du capteur est comprise entre 20 mm pour le bois et 120 mm pour les métaux ferreux.
Une LED (verte, jaune, rouge) indique si un matériau a été trouvé ou s'il y a une ligne électrique sous tension dans la zone du mur en cours d'examen.

En stock
Protocole HTTPS de sécurité
Expédition rapide dans le monde entier
A votre service 365 jours par an

Scanning Device for Material Detection in a Wall

The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls.
The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits.
The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

  • LED light (green, yellow, red) with acoustic signal
  • Measuring depth up to 120mm, depending on the material
  • Display of the distance from the detected material
  • Inverted LCD display 6cm with lighting
  • IP 54 water and dust protected
  • Metal / Electricity mode to find metal or electricity
  • Wood mode button for finding wood
  • Hand strap for optimal transport of the device
  • Automatic switch-off after 5 min.
  • Self-calibration when switching on
  • Detection of ferrous and other metals
  • Accessories: carrying case, 9 V battery, manual
Maximum scan depth
Ferrous metals 120 mm ± 10 mm
Non-ferrous metals (copper)    80 mm ± 10 mm
Live Wire   50 mm ± 10 mm
Wood   20 mm ± 10 mm
Other features
Display  6 cm (2.4 inch)
Automatic shutdown  5 minutes
Protection class  IP54
Operating temperature  -10°C +50°C
Storage temperature  -20°C +70°C
Supply voltage  1 x 9 V battery
Dimensions  200 x 83 x 28 mm3

Téléchargement

Manual 3433 DE-EN

PeakTech_3433_02-2021_DE_EN.pdf

Téléchargement (1M)

Manual 3433 ES

PeakTech_3433_06-2023_ES.pdf

Téléchargement (704.87k)

Manuel 3433 FR

PeakTech_3433_02-2021_FR.pdf

Téléchargement (653.97k)

Manuale 3433 IT

PeakTech_3433_02-2023_IT.pdf

Téléchargement (650.2k)

Podręcznik 3433 PL

PeakTech_3433_06-2023_PL.pdf

Téléchargement (954.27k)