PeakTech 3433 - Detector de Materiales en una Pared

Referencia: 3433

48,72 $

Detector de Materiales en una Pared

El escáner PeakTech 3433 detecta madera, metal o conductores eléctricos vivos en las paredes para evitar daños por cincelar, cortar o perforar las paredes.
La pantalla LCD invertida muestra la distancia desde el material detectado y ayuda a evaluar el estado interno de la pared para evitar daños en tuberías, circuitos eléctricos activos u otros.
La profundidad de detección del sensor es de entre 20 mm para madera y 120 mm para metales ferrosos.
Un LED (verde, amarillo, rojo) indica si se ha encontrado un material o si hay una línea eléctrica viva en el área de la pared bajo examen.

Disponible

Protocolo de seguridad HTTPS

Envío rápido en todo el mundo

A su servicio los 365 días del año

Descripción
Archivos adjuntos

Scanning Device for Material Detection in a Wall

The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls.
The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits.
The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

LED light (green, yellow, red) with acoustic signal
Measuring depth up to 120mm, depending on the material
Display of the distance from the detected material
Inverted LCD display 6cm with lighting
IP 54 water and dust protected
Metal / Electricity mode to find metal or electricity
Wood mode button for finding wood
Hand strap for optimal transport of the device
Automatic switch-off after 5 min.
Self-calibration when switching on
Detection of ferrous and other metals
Accessories: carrying case, 9 V battery, manual

Maximum scan depth
Ferrous metals	120 mm ± 10 mm
Non-ferrous metals (copper)	80 mm ± 10 mm
Live Wire	50 mm ± 10 mm
Wood	20 mm ± 10 mm
Other features
Display	6 cm (2.4 inch)
Automatic shutdown	5 minutes
Protection class	IP54
Operating temperature	-10°C +50°C
Storage temperature	-20°C +70°C
Supply voltage	1 x 9 V battery
Dimensions	200 x 83 x 28 mm³