List of products by brand PeakTech

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.

4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature This 4 in 1 meter with one-hand operation measures: - The pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids; - The conductivity EC in µS/cm is via two electrodes on the sensor head; - The TDS value for the total dissolved solids;. - The liquid temperature, displayed simultaneously on the second line of LCD display that is permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS and Temperature measurement.

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.

Voltmeter, 3 ½ digits LCD, 13 mm digit height, 200 mV DC

Voltmeter, 3 ½ digits LCD backlight, 13 mm digit height, 200 mV DC

Magnetic Field Detector Ideal for the inspection of magnetic fields, and the correct function of coils, such as relays and magnetic valves. The magnetic field detector operates without contact, so that opening of the housing is not needed. On detection of a magnetic field, the probe light blue. It is checked with the permanent magnets attached. Test the magnetic field detector before each measurement.

Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight An easy to use and safe Multimeter with integrated protection frames, pocket sized for AC/DC voltage, current and resistance measurements, and non-contact voltage detection, with built-in flashlight. This devices uses an self-resetting PTC fuse for it's mA measurement range.

Voltage Detector 50 - 1000 V AC non Contact, with Buzzer Easy to use, for non-contact detection of AC voltage from 90 V to 1000 V. Suitable for outlets or for wire insulation testing. Suitable for conductor tracking of flush-mounted cables and localisation of line interruptions. If AC-voltage is at the measuring point, it is visually indicated by a flashing red LED and the integrated buzzer sounds. The probe lights green when the measuring point is free of voltage.

Voltage Detector 50 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 50V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

Digital Mutimeter, 3 ½ digits (1999) 27mm 3 ½ digits Multimeter developed as per safety standard CAT III 600V in compact, modern style and integrated protection frame, ideal for the education- and service-fields.

Digital Mutimeter, 3 ½ digits (1999), TrueRMS Compact 3 ½ digit multimeter with protective shell, True RMS. LCD display, 3 ½ digits, max. 1999 True RMS Value Measurements DC and AC voltages up to 600V DC and AC currents up to 10 A Manual ranges Data Hold and Relative Value functions Auto shutdown Battery charge status indication Fuse in the battery compartment Sturdy double shell container Diode and continuity test Test 1.5V and 9V batteries Compliant with safety standards: EN 61010-1; CAT III 600V / CAT IV 300V Accessories: carrying case, test leads, 2 batteries AAA 1.5 V, manual

Digital Multimeter, 3 ¾ digit (3999), Automatic Range, True RMS, Contactless Detector, Capacimeter, Frequency Meter, Thermometer Compact 3 ¾ digit multimeter with protective shell, True RMS, multifunction. LCD display, 3 ¾ digit, max. 3999 True RMS Value Measurements DC and AC voltages up to 600V DC and AC currents up to 10 A Automatic or Manual Range Data Hold, Minimum and Maximum, Relative Value Auto shutdown Battery charge status indication Fuse in the battery compartment Sturdy double shell container Compliant with safety standards: EN 61010-1; CAT III 600V / CAT IV 300V Diode and continuity test Test 1.5V and 9V batteries Accessories: carrying case, test leads, 2 x AAA 1.5 V batteries, manual

Digital Multimeter, 3 ½ digits (1999) 12mm, Thermometer TÜV/GS approved pocket size digital multimeter in modern design. Suitable for technicians and hobbyists.

Digital Multimeter, 3 ½ digits (1999) 20mm 3 ½ digit Multimeter developed as per safety standard CAT III 600 V in modern style and integrated protection frame. Ideal for the education and service fields.

Digital Pen-Type Multimeter, 3 ½ digits (1999) 11mm, Non-contact Voltage Detection This Pen Type Multimeter is a new development according to the latest safety requirements. It provides an easy to read LCD and the rotary switch for function selection enables convenient one-handed operation and fast results. Another new feature is the non-contact voltage detector for locating voltage-carrying conductors. With the integrated overload protection and low battery indication, this meter is ideal for user in the fields of workshop, education, hobby and home applications.

AC/DC Voltage Tester with RCD Test and LCD Display 3 ½ digits TÜV/GS-approved 2-pole voltage tester with backlight LCD 3½ digits display and bargraph for AC and DC measurement from 6 V to 400 V AC, 690 V DC. It offers also the possibility of continuity test with visual and audible signal, phase and direction indicator, and the testing of residual current devices (RCD).

Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper TÜV/GS-approved 2-pole voltage tester with LED-display for DC and AC measurement from 12 V to 690 V provides further a wide range of measurement functions. The highlights are the measuring point illumination, continuity test with visual and audible signal and the phase and direction indicator.

AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits PeakTech 1096 is a new instrument for measuring voltages accurately and quickly at the same time thanks to a 3 ½ digit backlit LCD display and a coarse LED indication of the usual voltage range. A single phase test and a direction of rotation display for 3-phase systems are already integrated in this model. The low impedance measurement function can be activated to avoid false indications due to capacitively induced voltages or to test RCDs. Furthermore, resistance measurement and continuity test are integrated, to be used only on voltage free conductors. When continuity is detected, the continuity check LED will illuminate and the beeper will sound. PeakTech 1096 has been tested by TÜV / GS for maximum user...

100MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter This combination of 2 Channels 100MHz digital storage oscilloscope and True RMS multimeter makes a complete solution for measurement needs. The creative design for short cut keys simplify all the operation and the high resolution 3.8 inch color display with TFT panel (640 x 480 pixels - 65535 colors) help to observe the waveforms, whereas the long time operating lithium-ion battery guarantees the continuous work. This instrument is the ideal equipment for modern on site measurements.