Cart (empty) 0

PeakTech 1195 - 100MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter

1195
$1,092.26

100MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter

This combination of 2 Channels 100MHz digital storage oscilloscope and True RMS multimeter makes a complete solution for measurement needs.
The creative design for short cut keys simplify all the operation and the high resolution 3.8 inch color display with TFT panel (640 x 480 pixels - 65535 colors) help to observe the waveforms, whereas the long time operating lithium-ion battery guarantees the continuous work.
This instrument is the ideal equipment for modern on site measurements.

Available
Security HTTPS protocol
Fast shipment worldwide
At your service 365 days a year

100MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter

This combination of 2 Channels 100MHz digital storage oscilloscope and True RMS multimeter makes a complete solution for measurement needs.
The creative design for short cut keys simplify all the operation and the high resolution 3.8 inch color display with TFT panel (640 x 480 pixels - 65535 colors) help to observe the waveforms, whereas the long time operating lithium-ion battery guarantees the continuous work.
This instrument is the ideal equipment for modern on site measurements.

  • USB interface
  • Socket for USB stick to save data
  • Support alternative trigger
  • Advantage of video trigger function and optimized trigger sensitivity
  • Record length 6K
  • True RMS multimeter
  • Dual independet galvanic separated (for multimeter and between oscilloscope and multimeter)
  • Auto scale and auto setup function in oscilloscope mode
  • 5 V 1 kHz output for adjusting the oscilloscope probes
  • Safety: EN 61010-1: CAT II 400 V
  • Accessories: AC-DC adaptor, 2 oscilloscope probes, test leads, cable for connection to USB mass storage, extension module for small capacity measurement, USB interface cable, software on CD for Windows 2000/XP and VISTA, carrying case, manual
  • Optional accessories: accu pack 7.4 V, 3.5 Ah, model AKKU 5
Oscilloscope
Bandwidth 100 MHz
Channels 2
Display 3.8” TFT colour display (640 x 480 pixel - 65535 colours)
Acquisition
Mode sample, peak detect, averaging
Sample rate (real time) 250 MS/s
Input
Input coupling DC, AC
Input impedance 1 MΩ ± 2 % parallel with 20 pF ± 5 pF
Probe attenuation factors 1X, 10X, 100X, 1000X
Max. input voltage 400 V (pk-pk) CAT II
Horizontal system
Sampling range 10 S/s ~ 500 MS/s
Time base range 5 ns / div ~ 5 s / div (in 1 / 2.5 / 5 steps)
Accuracy 100 ppm
Vertical system
Verticale resolution 8 Bits
Verticale sensitivity 5 mV / div. ~ 5 V / div. (BNC input)
Rising time < 3.5 ns
DC gain accuracy ± 5 %
Trigger
Trigger type Edge, Video
Trigger mode (Edge) Auto, Normal, Single, Trigger Hold off
Trigger sensitivity DC, AC
Trigger Sync. (Video) Field, Line
Trigger sensitivity (Video)   2 Div (peak-peak)
Line / Field frequency (Video) support NTSC, PAL, SECAM
Measurement
Autom. measurement PK-PK, averaging, RMS, frequency, cycle, Vtop,Vmax,Vmin,Vbase,Vamp, overshoot, preshoot, Rise Time, Fall Time, +Widht, -Width, +Duty, -Duty, Delay a > b (wave up and down)
Waveform storage 4 waveforms, 4 settings
Digital Multimeter
Voltage DC V: 400 mV / 4 / 40 / 400 V; ± (1 % + 1 digit)
AC V: 4 / 40 / 400 V; ± (1 % + 3 digits) (40 ~ 400 Hz)
Current DC A: 40 / 400 mA / 10 A; ± (1.5 % + 1 digit)
AC A: 40 / 400 mA / 10 A; ± (1.5 % + 3 digits)
Resistance 400 Ω / 4 / 40 / 400 kΩ / 4 / 40 MΩ; ± (1 % + 3 digits)
Capacity 51.2 nF ~ 100 µF; ± (3 % + 3 digits)
Operating voltage 7.4 V / 3500 mA DC Li-Ion-Accumulator or AC Adaptor 230 V AC; 50 Hz, 8.5 V DC / 1.5 A
Dimensions (WxHxD) 115 x 180 x 40 mm3
Weight 650 g

Download

Manual 1195 DE-EN

PeakTech_1195_1205_12-2022_DE-EN.pdf

Download (2.87M)

Manual 1195 ES

PeakTech_1195_1205_06-2023_ES.pdf

Download (2.11M)

Manuel 1195 FR

PeakTech_1195_1205_07-2021_FR.pdf

Download (2.12M)

Podręcznik 1195 PL

PeakTech_1195_1205_05-2023_PL.pdf

Download (2.24M)

You might also like