Cart (empty) 0

Best sellers

All best sellers

Home

Active filters:

  • Weight: 1kg - 1.1kg

PeakTech 7250 - Carrying Case for Instruments 298 x 90 x 70 mm - Silver Color

Carrying Case for Measurement Instruments 298 x 90 x 70 mm 3 - Silver Color This high quality lockable aluminum case protects your electronic instruments on travel or on your way to work from any damage which may occur. The double notch in the closed edge prevents the ingress of dust and spray-water, while the padded interior keeps your equipment from impact damages. Due to the different sizes available, you can use these cases for a huge variety of measurement devices & generators including accessories and also any other sensitive instruments.
$20.51

5305A - pH-Meter and Thermometer (2-in-1)

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.
$36.79

PeakTech 7400 - Carrying Case for Oscilloscopes 380 x 210 x 140 mm

Carrying Case for Oscilloscopes 380 x 210 x 140 mm 3 Practical carrying case particularly suitable for oscilloscopes or other devices of similar shape. On the front it has a pocket for measuring accessories, eg. the probes and power cables. Sturdy and with high quality padding for maximum protection of the measuring instrument. Handle and shoulder strap to carry it comfortably and safely.
$37.87

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...
$45.47

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1)

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.
$46.55

PeakTech 3350 - Digital Multimeter, 3 5/6 digits (5999) 22mm, AutoRange, TrueRMS, Capacimeter, Frequency Meter, Thermometer K

Digital Multimeter, 3 5/6 digit (5999), AutoRange, True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3350 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.
$51.98

PeakTech 3432 - Multi-Function Fuse Locator, with NCV Detector and RCD Tester

Multi-Function Fuse Locator, with NCV (Non Contact Voltage) Detector and RCD (Residual Current Device) Tester The PeakTech 3432 is a multi-function measuring device which locates fuses in a circuit, detects the presence of voltage, tests RCD devices. It consists of a combination of a transmitter and a receiver. Both are used to locate the fuses, the receiver alone is used to detect voltages and the transmitter alone, plugged into an outlet, is used to test the RCDs. This combination of functions of the PeakTech 3432 simplifies a lot the work of an experienced electrician as well as of a novice user.
$54.15

5307 - 4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature

4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature This 4 in 1 meter with one-hand operation measures: - The pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids; - The conductivity EC in µS/cm is via two electrodes on the sensor head; - The TDS value for the total dissolved solids;. - The liquid temperature, displayed simultaneously on the second line of LCD display that is permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS and Temperature measurement.
$54.15

PeakTech 2030 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS The PeakTech 2030 was developed for professional use, it has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.
$71.51

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values ​​and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values ​​are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.
$75.85

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.
$80.20

PeakTech 2035 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2035 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.
$82.37

PeakTech 2175 - LCR Meter, 4 ½ digits, 100 Hz - 1 kHz

LCR Meter, 4 ½ digits, 100 Hz - 1 kHz This digital LCR meter is our newest development and features a large 4 ½ digit LCD display (max 11000), which provides a fast and accurate reading of measured values. The meter is capable of measuring up to 110 mF, which is very useful when testing capacitors in audio equipment or in the area of amateur radio. Inductance (coils) can be measured up to 20 H and resistors up to 110 MΩ. Additionally, the device includes a diode and continuity test. Through the simple operation and the technical capability of this LCR meter, it is the ideal tool in the service and repairs.
$86.71

PeakTech 1700 - Fork Ammeter for AC, 3 5/6 digits 13mm, 200A 16mm, True RMS

Fork Ammeter for AC, 3 5/6 digits 13mm, 200A 16mm, True RMS PeakTech 1700 fork ammeter for AC allows the user to carry out quick and effective current measurements in areas that are difficult to access. Examples of this are measurements on terminal blocks in control cabinets or individual wires / lines on electrical devices. With accurate voltage, resistance and capacitance measurement, diode and continuity testing, the PeakTech 1700 can cover the most important areas of common electrical measurements. The backlit LCD display, the buttons and rotary switch illuminated and the integrated LED flashlight allow to carry out the required measurements, even in darker places.
$96.47

PeakTech 4390 - Digital Multimeter, 3 5/6 digits (5999) 21 mm, Bargraph, TRMS, Frequency Meter, Thermometer K, USB

Digital Multimeter, 3 5/6 digits 21 mm, Bargraph, TRMS, Frequency Meter, Thermometer K , USB Compact Digital Multimeter with 3 5/6 digit multifunction display, 63 segments analogue bargraph and integrated USB interface for easy connection with computer to realize macro recording, monitoring and capture of transient dynamic data. Full input protection, backlight, and easy operating for choosing several measurement functions with the help of the clear view push button section. The True RMS AC voltage and current readings are other most important features of this new constructed multimeter.
$102.98

PeakTech 2180 - Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer

Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer This combined handheld digital multimeter and LCR meter can be used universally for the service and maintenance sector, due to its high versatility. Large 3 5/6-digits liquid-crystal display (max. 5999) with an analog bargraph and backlight illumination. In addition to the multimeter functions such as voltage, current and frequency measurement, this machine also has measurement functions for inductance, capacitance and resistance. As additional feature, temperatures can be measured with the enclosed K-type probe. For professional use in the field, this device is IP67 dust, & water proof against short-time immersion, and thus naturally also protected against rain and spray.
$108.41

PeakTech 4145-5A - Current Clamp Adapter AC, 5A 8mm, with BNC Plug

Current Clamp Adapter AC, 5A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 5A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.
$108.41

PeakTech 2040 - Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2040 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 20.000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.
$114.92

PeakTech 4145-50A - Current Clamp Adapter AC, 50A 8mm, with BNC Plug

Current Clamp Adapter AC, 50A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 50A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.
$118.83

PeakTech 4145-100A - Current Clamp Adapter AC, 100A 13mm, with BNC Plug

Current Clamp Adapter AC, 100A 13mm, with BNC Plug Professional measuring transducer that allows accurate measurements of currents up to 100A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.
$129.68