Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 27 products.

Sort by:

PeakTech 5185PR - Temperature and Humidity Probe for PeakTech 5185

Temperature and Humidity Probe for PeakTech 5185 (Replacement) Replacement probe for Datalogger PeakTech 5185.

$25.75

PeakTech 5315 - pH-Meter 0.00 - 14.00 with Backlight

pH-Meter 0.00 - 14.00 with Backlight The PeakTech 5315 pH-meter has a long and thin measuring probe specially developed for laboratory use, which can be used for flasks, beakers or cylinders. The probe can be easily removed thanks to its screw attachment. The LCD display is backlit and is easily readable. In the upper part there are the On/Off switch and two trimmers for pH 7 and pH 4 calibration. The two necessary buffer solutions for calibration are included.

$34.62

PeakTech 5160 - Air Temperature and Humidity Meter 3 digits

Air Temperature / Humidity Meter 3 digits This newly developed instrument measures the current humidity, as well as the current air temperature over a fixed sensor for fast and accurate evaluation of the measurement results. The easy to read LCD display is equipped with an automatic backlight, which activates itself in low brightness areas by a photodiode. In addition to the precise measurement function, this device also offers a data hold function. By the handy and robust design, this instrument is especially suitable for the daily use in the construction sector, as well as the assessment of the climate state of living rooms and greenhouses.

$35.70

5305A - pH-Meter and Thermometer (2-in-1)

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.

$36.79

PeakTech 3705 - Digital Capacity Tester, 3 ½ digits, 8/80/800Hz

Digital Capacity Tester, 3 ½ digits, 8/80/800Hz Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.

$40.04

PeakTech 1041 - Digital Multimeter, 3 ¾ digits (3999), Auto Range, TrueRMS, Contactless Detector, Multifunction

Digital Multimeter, 3 ¾ digit (3999), Automatic Range, True RMS, Contactless Detector, Capacimeter, Frequency Meter, Thermometer Compact 3 ¾ digit multimeter with protective shell, True RMS, multifunction. LCD display, 3 ¾ digit, max. 3999 True RMS Value Measurements DC and AC voltages up to 600V DC and AC currents up to 10 A Automatic or Manual Range Data Hold, Minimum and Maximum, Relative Value Auto shutdown Battery charge status indication Fuse in the battery compartment Sturdy double shell container Compliant with safety standards: EN 61010-1; CAT III 600V / CAT IV 300V Diode and continuity test Test 1.5V and 9V batteries Accessories: carrying case, test leads, 2 x AAA 1.5 V batteries, manual

$41.13

PeakTech 3349 - Digital Multimeter, 3 5/6 digits (5999) 22mm, TrueRMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector

Digital Multimeter, 3 5/6 digit (5999), True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3349 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.

$45.47

PeakTech 3710 - R/C Pen Meter for SMD, 3 5/6 digits (5999) 11 mm

Pen Capacimeter and Ohmmeter for SMD, 3 5/6 digits (5999) 11 mm Auto scan pen meter in a set of tweezers for SMD measure precise and fast small chip components, ideal for use in the service and education fields.

$46.55

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1)

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.

$46.55

PeakTech 3350 - Digital Multimeter, 3 5/6 digits (5999) 22mm, AutoRange, TrueRMS, Capacimeter, Frequency Meter, Thermometer K

Digital Multimeter, 3 5/6 digit (5999), AutoRange, True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3350 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.

$51.98

5307 - 4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature

4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature This 4 in 1 meter with one-hand operation measures: - The pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids; - The conductivity EC in µS/cm is via two electrodes on the sensor head; - The TDS value for the total dissolved solids;. - The liquid temperature, displayed simultaneously on the second line of LCD display that is permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS and Temperature measurement.

$54.15

PeakTech 5002 - Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.

Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max. An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed. Output of automatic test voltage from 0 to 300V 3 digit LED display of the output voltage Test of individual LEDs or LED panels Test of Zener Diodes Test the withstand voltage of Electrolytic Capacitors Robust plastic housing Safety: EN 61010-1 Accessories: Carrying case, Test Leads, Power Cable, Operation Manual

$60.66

PeakTech 5185 - Air Temperature & Humidity USB-Datalogger

Air Temperature & Humidity Datalogger with USB New handy USB data loggers for temperature and air humidity. The included software allows to set all required parameters before recording, such as the desired sample rate, the starting function, even after a specific time and date or to set a password for securing the data access. The measurement values recorded can be conclusively evaluated with the PC software, such as displayed as diagrams or saved as an Excel spreadsheet, text or image file.

$65.00

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.

$75.85

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.

$80.20

PeakTech 5400 - IR-Thermometer - Dewpoint Meter -50+260°C,0-100%

IR-Thermometer - Dewpoint Meter -50...+260°C, 0-100% RH This new combined device measures the relative humidity, air temperature and the surface temperature by infrared measurement for thermal bridges, e.g. on building-walls and in wall- corners. This allows the user to locate moisture precipitates quickly to make appropriate actions and prevent from mold growth in buildings. For easy handling, the two-color LED placed above the LCD display, enables the user to make a quick pass / fail evaluation and changes in risk of mold growth from green to red. In addition, an audible alarm will sound.

$80.20

PeakTech 2175 - LCR Meter, 4 ½ digits, 100 Hz - 1 kHz

LCR Meter, 4 ½ digits, 100 Hz - 1 kHz This digital LCR meter is our newest development and features a large 4 ½ digit LCD display (max 11000), which provides a fast and accurate reading of measured values. The meter is capable of measuring up to 110 mF, which is very useful when testing capacitors in audio equipment or in the area of amateur radio. Inductance (coils) can be measured up to 20 H and resistors up to 110 MΩ. Additionally, the device includes a diode and continuity test. Through the simple operation and the technical capability of this LCR meter, it is the ideal tool in the service and repairs.

$86.71

PeakTech 5180 - Temperature and Humidity Data Logger

Temperature and Humidity Data Logger -40...+70°C, 0-100% RH This new data logger for air temperature, air humidity and temperature measurements over two K-Type probes convinces with a long recording time and the four simultaneously recorded measurement values with exact recording date and time. The included software allows the user to set all required parameters before recording, such as the desired sampling rate, high and low alarm or the desired measurement units. In addition, the maximum recording time displayed depending on the selected sampling rate. Those recorded measurement values can finally be evaluated using the PC software, such as building diagrams or save the data as an Excel chart with all needed information.

$94.95

PeakTech 5090 - IR Temperature and Humidity Meter -50 to +500 °C

IR Temperature / Humidity Meter -50 to +500 °C Combined temperature and humidity meter with double function LCD display for showing RH and temperature at the same time, suitable for use in refregerator, airconditioning and general heat treatment processes employed by metal processing, electric power plants and chemical industry. With built in laser pointer for non-contact infrared temperature measurements of hot or moving objects from a safe distance or of difficult measuring points.

$95.39

PeakTech 5201 - Material Moisture Meter

Material Moisture Meter This new instrument is used for non-destructively tracing dampness in building material of all kinds as well for detecting damp distribution in walls, ceilings and floors. The absolute humidity, as well as the minimum and maximum measured moisture are here shown in the large, illuminated digital display. To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button. Besides the measured values, the device shows a settable message "Dry, Wet or Risk" and also makes an audible warning tone for high humidity values.

$97.56

Showing 1-20 of 27 item(s)