Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 18 products.

Sort by:

PeakTech 5185PR - Temperature and Humidity Probe for PeakTech 5185

Temperature and Humidity Probe for PeakTech 5185 (Replacement) Replacement probe for Datalogger PeakTech 5185.

$25.75

PeakTech 5315 - pH-Meter 0.00 - 14.00 with Backlight

pH-Meter 0.00 - 14.00 with Backlight The PeakTech 5315 pH-meter has a long and thin measuring probe specially developed for laboratory use, which can be used for flasks, beakers or cylinders. The probe can be easily removed thanks to its screw attachment. The LCD display is backlit and is easily readable. In the upper part there are the On/Off switch and two trimmers for pH 7 and pH 4 calibration. The two necessary buffer solutions for calibration are included.

$34.62

PeakTech 5160 - Air Temperature and Humidity Meter 3 digits

Air Temperature / Humidity Meter 3 digits This newly developed instrument measures the current humidity, as well as the current air temperature over a fixed sensor for fast and accurate evaluation of the measurement results. The easy to read LCD display is equipped with an automatic backlight, which activates itself in low brightness areas by a photodiode. In addition to the precise measurement function, this device also offers a data hold function. By the handy and robust design, this instrument is especially suitable for the daily use in the construction sector, as well as the assessment of the climate state of living rooms and greenhouses.

$35.70

5305A - pH-Meter and Thermometer (2-in-1)

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.

$36.79

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1)

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.

$46.55

5307 - 4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature

4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature This 4 in 1 meter with one-hand operation measures: - The pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids; - The conductivity EC in µS/cm is via two electrodes on the sensor head; - The TDS value for the total dissolved solids;. - The liquid temperature, displayed simultaneously on the second line of LCD display that is permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS and Temperature measurement.

$54.15

PeakTech 5185 - Air Temperature & Humidity USB-Datalogger

Air Temperature & Humidity Datalogger with USB New handy USB data loggers for temperature and air humidity. The included software allows to set all required parameters before recording, such as the desired sample rate, the starting function, even after a specific time and date or to set a password for securing the data access. The measurement values recorded can be conclusively evaluated with the PC software, such as displayed as diagrams or saved as an Excel spreadsheet, text or image file.

$65.00

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.

$75.85

PeakTech 5400 - IR-Thermometer - Dewpoint Meter -50+260°C,0-100%

IR-Thermometer - Dewpoint Meter -50...+260°C, 0-100% RH This new combined device measures the relative humidity, air temperature and the surface temperature by infrared measurement for thermal bridges, e.g. on building-walls and in wall- corners. This allows the user to locate moisture precipitates quickly to make appropriate actions and prevent from mold growth in buildings. For easy handling, the two-color LED placed above the LCD display, enables the user to make a quick pass / fail evaluation and changes in risk of mold growth from green to red. In addition, an audible alarm will sound.

$80.20

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.

$80.20

PeakTech 5180 - Temperature and Humidity Data Logger

Temperature and Humidity Data Logger -40...+70°C, 0-100% RH This new data logger for air temperature, air humidity and temperature measurements over two K-Type probes convinces with a long recording time and the four simultaneously recorded measurement values with exact recording date and time. The included software allows the user to set all required parameters before recording, such as the desired sampling rate, high and low alarm or the desired measurement units. In addition, the maximum recording time displayed depending on the selected sampling rate. Those recorded measurement values can finally be evaluated using the PC software, such as building diagrams or save the data as an Excel chart with all needed information.

$94.95

PeakTech 5090 - IR Temperature and Humidity Meter -50 to +500 °C

IR Temperature / Humidity Meter -50 to +500 °C Combined temperature and humidity meter with double function LCD display for showing RH and temperature at the same time, suitable for use in refregerator, airconditioning and general heat treatment processes employed by metal processing, electric power plants and chemical industry. With built in laser pointer for non-contact infrared temperature measurements of hot or moving objects from a safe distance or of difficult measuring points.

$95.39

PeakTech 5201 - Material Moisture Meter

Material Moisture Meter This new instrument is used for non-destructively tracing dampness in building material of all kinds as well for detecting damp distribution in walls, ceilings and floors. The absolute humidity, as well as the minimum and maximum measured moisture are here shown in the large, illuminated digital display. To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button. Besides the measured values, the device shows a settable message "Dry, Wet or Risk" and also makes an audible warning tone for high humidity values.

$97.56

PeakTech 5035 - 4 in 1 Multifunction Environment Tester

4 in 1 Multifunction environment tester This meter has been designed to combine the functions of Sound Level, Light Meter, Humidity Meter and Temperature Meter. It is an ideal Multi-Function Environment Meter Instrument with scores of practical applications for professional and home use. The Sound Level functions can be used to measure noise in factories, schools, offices, airports, home, etc. checking acoustics of studios, audiotoriums and hi-fi installations. The Light functions is used to measure illuminance in the field. It is fully cosine corrected for the angular incidence of light. The light sensitive component used in the meter is a very stable, long life silicon diode. The Humidity / Temperature use a humidity / semiconductor sensor and K type thermocouple.

$107.98

PeakTech 5039 - Thermo-Hygrometer with Dew Point and Wet Bulb Temperatures

Thermo-Hygrometer with Dew Point and Wet Bulb Temperatures The PeakTech 5039 is an inexpensive thermal hygrometer for the simultaneous measurement and display of the ambient temperature and humidity. It also calculates the dew point temperature and the wet bulb temperature, which respectively represent the temperature at which dew formation begins and the evaporation temperature of the wet bulb This inexpensive and compact measuring device is ideal for use in the construction sector, building services or heating and air-conditioning technology.

$124.25

PeakTech 5125 - Pure Water Tester

Pure Water Tester To measure the conductivity value (ranging from 0 - 2000 µS) which can therefore judge whether water is pure or not. The conductivity value will become lower if there is much less impurities existed in water (for example, distilled water that its purity is higher than others will get a lower conductivity value of approx. < 10 µS). In industrial sectors, it would be a great help for the quality of the products if using the good water (more pure water) in the process. It may cause several diseases if home drink water existing high conductivity & contain impurities, the (pure water tester) are designed to check the purity of water (water conductivity) also can determine the conduction of the “water filter” easily and rapidly.

$140.53

PeakTech 8104 - Measurement Equipment Set "Temperature & Dew Point"

Measurement Equipment Set "Temperature & Dew Point" In the research area, heating and air conditioning field and assessment of houses in the building and real estate area, a quick and accurate evaluation of humidity, dew point and surface temperature is indispensable. The new PeakTech 5400 Infrared Thermometer with Dew Point measurement and good/bad review with color LEDs is a practical device for everyday use and can detect, in an uncomplicated way, at which points condensation can accumulate, which supports the formation of mold. At the same time a surface temperature can be measured quickly and accurately with the infrared temperature measurement.

$183.40

PeakTech 5500 - Frying Oil Tester

Oil-Tester This device has been developed for the fast and reliable testing of frying oils in the catering industry, large kitchens, but also the private user. Also this unit displays the oil temperature, so that the appliance settings and indicators of the fryer can be checked. By measuring the TPM value (total polar material), the content of polar substances can be determined, which characterizes a reliable parameter for the extent of the aging of the frying oil / fat during frying.

$248.51