Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 23 products.

Sort by:

PeakTech 1032 - Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight

Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

$23.77

PeakTech 1020A - Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight

Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight An easy to use and safe Multimeter with integrated protection frames, pocket sized for AC/DC voltage, current and resistance measurements, and non-contact voltage detection, with built-in flashlight. This devices uses an self-resetting PTC fuse for it's mA measurement range.

$31.36

PeakTech 5315 - pH-Meter 0.00 - 14.00 with Backlight

pH-Meter 0.00 - 14.00 with Backlight The PeakTech 5315 pH-meter has a long and thin measuring probe specially developed for laboratory use, which can be used for flasks, beakers or cylinders. The probe can be easily removed thanks to its screw attachment. The LCD display is backlit and is easily readable. In the upper part there are the On/Off switch and two trimmers for pH 7 and pH 4 calibration. The two necessary buffer solutions for calibration are included.

$34.62

5305A - pH-Meter and Thermometer (2-in-1)

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.

$36.79

PeakTech 1095 - Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper

Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper TÜV/GS-approved 2-pole voltage tester with LED-display for DC and AC measurement from 12 V to 690 V provides further a wide range of measurement functions. The highlights are the measuring point illumination, continuity test with visual and audible signal and the phase and direction indicator.

$42.21

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...

$45.47

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1)

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.

$46.55

PeakTech 2525 - 3-Phase Rotation Tester with LED-display

3-Phase Rotation Tester with LED-Display Determines rotary field direction, non-contact rotary field indication and determines the motor connection. Compact and handheld combitester designed according to safety standard CAT III 300 V. In modern style, essential, ideal for use in power installation. Allows contactless determination of the turning direction of unconnected motors or motors in the off status as well as of rotating fields. Electronic 3-phase measurements and test of phase breakdowns.

$48.72

PeakTech 2530 - 3-Phase Rotation Tester with LCD-display

3-Phase Rotation Tester with LCD-display New handheld tester designed according to safety standard CAT III 600 V in modern, compact style, for checking phase sequence and rotation. LCD-Displays provided on the unit will show wether the phase is open or which phase in open at a glance.

$48.72

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

$48.72

5307 - 4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature

4-in-1 Meter for pH, Electric Conductivity (EC) , Total Dissolved Solids (TDS), Temperature This 4 in 1 meter with one-hand operation measures: - The pH value of liquids via the galvanic voltage difference between acidic, neutral and basic liquids; - The conductivity EC in µS/cm is via two electrodes on the sensor head; - The TDS value for the total dissolved solids;. - The liquid temperature, displayed simultaneously on the second line of LCD display that is permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH/EC/TDS and Temperature measurement.

$54.15

PeakTech 1090 - AC/DC Voltage Tester with RCD Test and LCD Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and LCD Display 3 ½ digits TÜV/GS-approved 2-pole voltage tester with backlight LCD 3½ digits display and bargraph for AC and DC measurement from 6 V to 400 V AC, 690 V DC. It offers also the possibility of continuity test with visual and audible signal, phase and direction indicator, and the testing of residual current devices (RCD).

$71.51

PeakTech 3435 TR - Transmitter for Electric Cables Detector PeakTech 3435

Transmitter for Electric Cables Detector PeakTech 3435 Additional transmitter to be used in conjunction with the cables detector PeakTech 3435 to allow simultaneous tracking of multiple conductors.

$75.85

PeakTech 5310A - pH Meter with External Probe

pH Meter with External Probe Aqueous liquid pH value meter that uses a removable probe for quick and accurate evaluation of the measurement based on the potential difference generated at the tip of the probe by acidic, neutral and basic liquids. This device has two potentiometers for the calibration of the pH4 and pH7 values and a suitable screwdriver and three calibration buffer solutions are supplied. The measured values are displayed on the large LCD display with white backlight. It is powered by a standard 9V battery, for continuous use. This instrument, with its large display and complete range of accessories, is particularly suitable for both teaching and research.

$75.85

PeakTech 1096 - AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits PeakTech 1096 is a new instrument for measuring voltages accurately and quickly at the same time thanks to a 3 ½ digit backlit LCD display and a coarse LED indication of the usual voltage range. A single phase test and a direction of rotation display for 3-phase systems are already integrated in this model. The low impedance measurement function can be activated to avoid false indications due to capacitively induced voltages or to test RCDs. Furthermore, resistance measurement and continuity test are integrated, to be used only on voltage free conductors. When continuity is detected, the continuity check LED will illuminate and the beeper will sound. PeakTech 1096 has been tested by TÜV / GS for maximum user...

$79.11

PeakTech 5201 - Material Moisture Meter

Material Moisture Meter This new instrument is used for non-destructively tracing dampness in building material of all kinds as well for detecting damp distribution in walls, ceilings and floors. The absolute humidity, as well as the minimum and maximum measured moisture are here shown in the large, illuminated digital display. To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button. Besides the measured values, the device shows a settable message "Dry, Wet or Risk" and also makes an audible warning tone for high humidity values.

$97.56

PeakTech 5125 - Pure Water Tester

Pure Water Tester To measure the conductivity value (ranging from 0 - 2000 µS) which can therefore judge whether water is pure or not. The conductivity value will become lower if there is much less impurities existed in water (for example, distilled water that its purity is higher than others will get a lower conductivity value of approx. < 10 µS). In industrial sectors, it would be a great help for the quality of the products if using the good water (more pure water) in the process. It may cause several diseases if home drink water existing high conductivity & contain impurities, the (pure water tester) are designed to check the purity of water (water conductivity) also can determine the conduction of the “water filter” easily and rapidly.

$140.53

PeakTech 3435 - Electric Cables Detector (Receiver + Transmitter)

Electrical Cables Detector This new cable detector consisting of a transmitter and a receiver is suitable for the search of non-energized and live wires, as well as line breaks and line tracking of surface and flush mounted conductors, pipe systems and even conductors underground. Also power circuits can be localized in distribution panels and electric cabinets. By the adjustable channels up to 7 transmitters can be used simultaneously, which are displayed correctly with the receiver through the assigned channel number. The high sensitivity of the receiver allows the tracing of conductors from up to 2 meters distance. Well suited for complex electrical systems, pipe installations of heating systems for testing new installations and evaluate older systems in reconstruction works.

$205.10

PeakTech 5500 - Frying Oil Tester

Oil-Tester This device has been developed for the fast and reliable testing of frying oils in the catering industry, large kitchens, but also the private user. Also this unit displays the oil temperature, so that the appliance settings and indicators of the fryer can be checked. By measuring the TPM value (total polar material), the content of polar substances can be determined, which characterizes a reliable parameter for the extent of the aging of the frying oil / fat during frying.

$248.51

PeakTech 5605 - IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card

IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card This IR camera has an unbeatable performance / price ratio and is particularly suitable for industry, construction, mechanical, thermo-hydraulic, electrical systems, and wherever it is useful to make small temperature differences visible. This IR camera also contains a built-in video camera in the visible spectrum that allows you to simultaneously obtain infrared and visible images, the overlap of which allows problems to be easily identified. IR and visible images can be saved, with time and date, on the supplied SD card for later processing on a PC. In addition, this unit offers five different color palettes for thermal imaging, five blend modes for photo to thermal imaging and a graphical menu navigation.

$346.72

Showing 1-20 of 23 item(s)