Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 92 products.

Sort by:

PeakTech 2240 - Isolation Transformer, 230V 50-60Hz 500W

Isolation Transformer, 230V 50-60Hz 500W Under consideration of the high safety requirements in the service centers, schools and industry it is absolutely necessary to use AC power source. This power source is provided with a galvanic separation between primary and secondary voltage for measuring and servicing of open instruments granting a high safety standard.

$238.63

PeakTech 2275 - Electronic Load, DC 150W 360V 30A, USB

Electronic Load, DC 150W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$432.99

PeakTech 2280 - Electronic Load, DC 300W 360V 30A, USB

Electronic Load, DC 300W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$758.55

PeakTech 1285 - Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based

Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based This newly developed 2-channel PC-based oscilloscope is perfect for mobile use with a laptop, for permanent installation in control cabinets, for industrial facilities and many other applications where a small, lightweight and powerful oscilloscope is required. The input signals can be directly transferred to the PC via USB or LAN network. By the powerful software and the many functions provided, multifarious applications in service, science and industrial areas are possible.

$465.55

Out-of-Stock

Out of stock

PeakTech 6181 - Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232

Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232 The innovative PeakTech 6181 power supply unit with color TFT display combines the advantages of a linear-controlled laboratory power supply unit with the remote control options, which have mostly been reserved by switching power supplies so far. It is operated via the graphical menu system and enables simple control and programming of its multiple features. In addition, the device is using the included PC software that allows a complete remote control. For doubling the output voltage or output current values, the two independent channels can be interconnected in serial or parallel circuit. Also a plus/minus connection of the outputs is possible.

$716.77

PeakTech 4124 - DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 2 Channels, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 2 Channels, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the easily control via the various menu functions, a wide range of integrated waveforms and the excellent price/performance ratio. In this way this generator is perfect for almost all tasks in education, research and development.

$432.99

PeakTech 4121 - DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 1 Channel, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 10 MHz, 1 Channel, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the easily control via the various menu functions, a wide range of integrated waveforms and the excellent price/performance ratio. In this way this generator is perfect for almost all tasks in education, research and development.

$367.88

PeakTech 4120 - DDS Arbitrary Waveform Generator, 1 µHz - 5MHz, 1 Channel, 14 bits Vertical

DDS Arbitrary Waveform Generator, 1 µHz - 5 MHz, 1 Channel, 14 bits Vertical This newly designed direct digital synthesis (DDS) arbitrary waveform generator with advanced graphical user control has excellent technical properties and a high variety of functions. Of particular note here are the easily control via the various menu functions, a wide range of integrated waveforms and the excellent price/performance ratio. In this way this generator is perfect for almost all tasks in education, research and development.

$324.47

PeakTech 4096 - Digital Graphic Benchtop Multimeter, 5 ½ digits (199999), TrueRMS, 4-wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 5 ½ digits (199999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$758.55

PeakTech 1565 - Laboratory Switching Power Supply, DC 1-16V 0-40A, Programmable, USB

Laboratory Switching Power Supply, DC 1-16V 0-40A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles.

$357.03

PeakTech 1575 - Laboratory Switching Power Supply, DC 1-32V 0-20A, Programmable, USB

Laboratory Switching Power Supply, DC 1-32V 0-20A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels.

$357.03

PeakTech 1885 - Laboratory Switching Power Supply, DC 1-40V 0-5A, Programmable, RS-232C, RS-485

Laboratory Switching Power Supply, DC 1-40V 0-5A, Programmable, RS-232C, RS-485 This series of user friendly programmable power supplies are ideal for repetive procedure in testing, production, or R&D environment. The unit is controlled by MCU (micro-controller unit) coupled to regulated Switching Mode Power Supply. Nine user presets of output voltage and current are available for instant recall. A sequence of up to 10 programmed output of voltages, currents and time intervals can be set and activated via the unit´s keypad or PC interface.

$401.41

PeakTech 1890 - Laboratory Switching Power Supply, DC 1-20V 0-10A, Programmable, RS-232C, RS-485

Laboratory Switching Power Supply, DC 1-20V 0-10A, Programmable, RS-232C, RS-485 This series of user friendly programmable power supplies are ideal for repetive procedure in testing, production, or R&D environment. The unit is controlled by MCU (micro-controller unit) coupled to regulated Switching Mode Power Supply. Nine user presets of output voltage and current are available for instant recall. A sequence of up to 10 programmed output of voltages, currents and time intervals can be set and activated via the unit´s keypad or PC interface.

$401.41

PeakTech 1570 - Laboratory Switching Power Supply, DC 1-16V 0-60A, Programmable, USB

Laboratory Switching Power Supply, DC 1-16V 0-60A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels.

$541.51

PeakTech 1585 - Laboratory Switching Power Supply, DC 1-60V 0-15A, Programmable, USB

Laboratory Switching Power Supply, DC 1-60V 0-15A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles.

$541.51

PeakTech 6125 - Laboratory Power Supply in 1V steps, DC 1-15V 5A + AC 1-15V 5A

Laboratory Power Supply in 1V steps, DC 1-15V 5A + AC 1-15V 5A New developed power supply for DC and AC voltages. Especially concepted for science investigation, technical education, electrical industry and servicing of AC-circuits, transformers, illumination. The durable power supply connects easy handling with a good performance.

$237.66

PeakTech 6130 - Laboratory Power Supply in 1V steps, DC 1-15V 10A + AC 1-15V 10A

Laboratory Power Supply in 1V steps, DC 1-15V 10A + AC 1-15V 10A New developed power supply for DC and AC voltages. Especially concepted for science investigation, technical education, electrical industry and servicing of AC-circuits, transformers, illumination. The durable power supply connects easy handling with a good performance.

$302.77

PeakTech 5995 - Laboratory Power Supply, DC 0-30V 0-6A, AC 0-30V 6A, Digital Meters

Laboratory Power Supply, DC 0-30V 0-6A, AC 0-30V 6A, Digital Meters This high precision DC/AC power supply provides with two adjustable outputs of DC and AC. The DC voltage is stabilized and is adjustable from 0 to 30 V, the DC current limit is adjustable from 0 to 6 A. The AC voltage is adjustable from 0 to 30 V, the AC over-current LED indication is adjustable from 0 to 6 A. Both the blue colour 3 digits LCD volt and ampere meters guarantee the indication of each of the two output with high accuracy. Especially conceived for servicing of AC-circuits, transformers, illumination, etc.

$693.43

PeakTech 6120 - Laboratory Power Supply, DC (not Leveled) 0-30V 5A, AC 0-30V 5A, Digital Meters

Laboratory Power Supply, DC (not Leveled) 0-30V 5A, AC 0-30V 5A, Digital Meters New developed power supply for DC and AC especially concepted for science investigation, technical education, electrical industry and servicing of AC-circuits, transformers, illumination. The durable power supply matches easy handling with good performances.

$357.57

PeakTech 6060 - Laboratory Power Supply, DC 2 x 0-30V 0-10A, 5V 3A, Digital Meters

Laboratory Power Supply, DC 2 x 0-30V 0-10A, 5V 3A, Digital Meters, Rack 19" 3U A new conception of power supply for built-in into 19” racks, are ideal for service centers, schools and industries. 3 digit 14 mm green LED-displays enable the user to read the fixed values quickly and accurately. 4 mm safety jacks and as well as 19” metal cabinet are main features of this new power supply. The unit provides 2 adjustable outputs for constant voltage and current, which can be connected in parallel or in series. That means max. output voltage 60 V DC in series or max. output current 20 A in parallel.

$867.06

Showing 1-20 of 92 item(s)