
PeakTech 1331 - Digital Oscilloscope, 4 Channels, 100 MHz, 1 GS/s total, PC based with USB & LAN
Digital Oscilloscope, 4 Channels, 100 MHz, 1 GSa/s total, PC based
This newly developed 4-channel PC Oscilloscope is ideal for mobile use on a laptop, for permanent installation in control cabinets, for industrial equipments and many other applications where a small, lightweight and powerful oscilloscope is required.
The measurement data can be directly transferred to the PC via USB or LAN network with the included PC software.
The oscilloscope has an insulated LAN network interface through which the data can be transmitted remotely in local area networks.This allows to install the device in electrical systems and allows you to do data acquisition comfortably from the workplace.
The interface isolation ensures the maximum security for the user and the computer system.



Digital Oscilloscope, 4 Channels, 100 MHz, 1 GS/s total, PC based with USB & LAN
This powerful 4-channel oscilloscope is ideal for mobile use on a laptop or permanent installation in control cabinets.
To quickly display each incoming waveform, simply press the Autoset key and the oscilloscope itself searches for the best possible display.
With Autoscale, the scaling of the time base can be adjusted in a user-friendly manner.
Data transfer to the PC takes place via an isolated LAN interface using a supplied AC adapter to power the oscilloscope, or via the USB interface which also powers the oscilloscope.
- 4-channel 100 MHz PC oscilloscope with 1 GS/s sampling rate
- Memory length of 10 million points per channel
- XY mode and FFT function
- Data transmission via isolated LAN interface or via USB interface
- Input voltage max. 40 Vpp
- Accessories: 4 probes, 4 cables BNC-BNC 1m, USB cable, mains adapter, manual, software CD
Bandwidth | 100 MHz |
Channels | 4 |
Acquisition | |
---|---|
Sampling mode | Normal, Peak detection, Averaging |
Sampling rate - One Channel | 1 GS/s |
Sampling rate - Two Channels | 500 MS/s each |
Sampling Rate - Four Channels | 250 MS/s each |
Vertical resolution | 8 Bits |
Input | |
Input coupling | DC, AC, GND |
Input impedance | 1 MΩ ± 2 % in parallel with 15 pF ± 5 pF |
Probe damping factor | 1X, 10X, 100X, 1000X |
Max. input voltage | 40 V (DC + AC peak-to-peak) |
Channel Isolation @50Hz | 100:1 |
Channel Isolation @10MHz | 40:1 |
Bandwidth limit | 20 MHz, or full bandwidth |
Time delay between channels | 150 ps (typical) |
Vertical system | |
Sensitivity | 2 mV/div - 5 V/div |
Rise time | < 3.5 ns |
DC accuracy | ±3 % |
Horizontal system | |
Scanning speed | 1 ns/div - 100 s/div |
Trigger | |
Trigger type | Alternate / Edge / Video / Pulse / Slope |
Trigger mode | Auto, Normal, Single |
Measurements | |
Cursor | △ V and △ T between cursors |
Automatic | Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay A→B +Width, -Width, +Duty, -Duty |
Phase difference | ±3 ° |
Record | |
Record length | 10,000,000 points/CH |
Common specifications | |
Interfaces | USB, LAN |
Operating voltage | 5 - 15 V DC, 1.2 A, < 8W |
Dimensions (WxHxD) | 190 x 120 x 18 mm3 |
Weight | 0.38 kg |
6 otros productos en la misma categoría: