Cart (empty) 0

PeakTech 2755 - Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100

2755
$874.57

Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100

This innovative combined meter for testing electrical installations has technical performance in the high-end range.
With the large 3.5 "TFT color display all important safety checks as the RCD, Voltage, Loop, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer.
Since this new development was designed only according to the latest standards, the required measuring values can be even more conveniently stored with an App (iOS/Android) via Bluetooth on the mobile phone, saved to SD card or, when work is completed, from the internal data memory via USB connection to PC.

Available
Security HTTPS protocol
Fast shipment worldwide
At your service 365 days a year

Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100

This innovative combined meter for testing electrical installations has technical performance in the high-end range.
With the large 3.5 "TFT color display all important safety checks as the RCD, Voltage, Loop, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer.
Since this new development was designed only according to the latest standards, the required measuring values can be even more conveniently stored with an App (iOS / Android) via Bluetooth on the mobile phone, saved to a SD card or, when work is completed, from the internal data memory via USB connection to a PC.
Of course, the device is already equipped with an extensive range of accessories, all required test leads and any necessary software CD. An App for mobile phones can be downloaded additonally.
The built-in help function can display each measurement function with a connection-sketch, how a test must be carried out. Trough this and the graphical user interface, the device is easy to handle and applicable for all qualified electric personnel, technicians and engineers.
To ensure a daily use, this device is powered by standard rechargeable Ni-Mh batteries, which can be charged in the device. Additional charged batteries can be carried with the instrument to always ensure the applicability or to extend the already high average operating time of 15 hours, even during longer missions. Also this device can be recharged from the mains or by a 12V car adapter.
During use, this high quality unit is protected by its IP 65 protection rating against dust, jets of water on all sides and can be transported in the included carrying case safely. During the measurement process it can also safely be held comfortably with a carrying strap.

  • 8.9 cm (3.5 ") TFT color display with backlight
  • For measurements according to DIN VDE 0100/0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364
  • Bluetooth interface for data transfer to a smart phone via Android or iOS App
  • USB interface for evaluation on PC
  • Internal memory and SD card for data recording
  • Safety: EN 61010-1 ; CAT III 600 V
  • Accessories included: Carrying case, Strap, Test leads, Test clips, Insulation-Probe, Universal charger, Earthing rod, Car charger, rechargeable Batteries, Manual and Software CD
SPECIFICATIONS
Display 8.9 cm / 3.5“ TFT Display; 320 x 240 Pixel
Interfaces USB, Bluetooth, SD-Card
Test Standards VDE 0100 / 0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364

MEASUREMENT RANGES
Functions RCD-Test, Loop/Pfc, V, Low Ohm, RE, Insulation
L-PE 0.23 Ω ~ 999 Ω ; ±(5% + 6 digits)
L-N 0.23 Ω ~ 999 Ω ; ±(4% + 4 digits)
RCD Current Multiplier x ½ ; x 1 ; x 2 ; x 5 ; ±(1% + 1 ms)
RCD Current 10 mA, 30 mA, 100 mA, 300 mA, 650 mA,1 A
RCD Trip-Time (max.) ½ I∆N: 1999 mS; I∆N: 500 mS; 2xI∆N: 150 mS; 5xI∆N: 40 mS
Voltage measurement 80 ~ 500 V AC / DC ; ±(2% + 2 digits)
Frequency 45 ~ 65 Hz ; ±2 Hz
Insulation-Test 0.125 Ω ~ 1000 MΩ @ 125 V / 250 V / 500 V / 1000 V; ±(3% + 2 digits)
Low-Ohm Test 0.000 Ω ~ 2000 Ω ; 0.001 Ω ; ±(1.5% + 3 digits)
Earth resistance 0.000 Ω ~ 2000 Ω ; 0.001 Ω ; ±(2% + 30 digits)
 
GENERAL SPECIFICATIONS
Safety CAT III 600V, IP65
Operating Voltage 8 x 1.2V Ni-MH Akku / 8 x 1.2V Ni-MH rechargeable battery
Battery Charger 110 – 240 V AC, 50/60 Hz / 12 V DC Adapter
Dimensions (WxHxD) 240 x 105 x 145 mm3
Weight 1560 g

Download

Manual 2755 DE-EN

PeakTech_2755_12-2022_DE-EN.pdf

Download (3.5M)

Manual 2755 ES

PeakTech_2755_12-2022_ES.pdf

Download (2.49M)

Manuel 2755 FR

PeakTech_2755_12-2022_FR.pdf

Download (2.37M)

Manuale 2755 IT

PeakTech_2755_02-2023_IT.pdf

Download (2.37M)

Conformity 2755

PeakTech_2755_Conformity.pdf

Download (864.47k)