Panier (vide) 0

Meilleures ventes

Toutes les meilleures ventes

PeakTech 2755 - Testeur de Sécurité d’Installation électrique VDE 0100, écran Couleur TFT, Carte SD, USB, Bluetooth

868,04 $US

Testeur de sécurité d'installation électrique avec écran couleur TFT, carte SD, USB, Bluetooth - Selon VDE 0100

Instrument innovant associé à des performances haut de gamme pour la vérification des installations électriques.
Effectue tous les tests de sécurité importants pour la vérification initiale des nouvelles installations ou annuel, RCD, tension, boucle, faible résistance, résistance de terre, isolation.
Equipé d'un grand écran TFT couleur de 3,5".
Les valeurs de mesure peuvent être stockées sur un téléphone mobile avec une application (iOS/Android) via Bluetooth, ou sur une mémoire SD, ou via USB sur un PC.
L'instrument est équipé de tous les accessoires nécessaires, tous les câbles et logiciels sur CD. L'application mobile peut être téléchargée sur le site Web.

En stock
Protocole HTTPS de sécurité
Expédition rapide dans le monde entier
A votre service 365 jours par an

Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100

This innovative combined meter for testing electrical installations has technical performance in the high-end range.
With the large 3.5 "TFT color display all important safety checks as the RCD, Voltage, Loop, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer.
Since this new development was designed only according to the latest standards, the required measuring values can be even more conveniently stored with an App (iOS / Android) via Bluetooth on the mobile phone, saved to a SD card or, when work is completed, from the internal data memory via USB connection to a PC.
Of course, the device is already equipped with an extensive range of accessories, all required test leads and any necessary software CD. An App for mobile phones can be downloaded additonally.
The built-in help function can display each measurement function with a connection-sketch, how a test must be carried out. Trough this and the graphical user interface, the device is easy to handle and applicable for all qualified electric personnel, technicians and engineers.
To ensure a daily use, this device is powered by standard rechargeable Ni-Mh batteries, which can be charged in the device. Additional charged batteries can be carried with the instrument to always ensure the applicability or to extend the already high average operating time of 15 hours, even during longer missions. Also this device can be recharged from the mains or by a 12V car adapter.
During use, this high quality unit is protected by its IP 65 protection rating against dust, jets of water on all sides and can be transported in the included carrying case safely. During the measurement process it can also safely be held comfortably with a carrying strap.

  • 8.9 cm (3.5 ") TFT color display with backlight
  • For measurements according to DIN VDE 0100/0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364
  • Bluetooth interface for data transfer to a smart phone via Android or iOS App
  • USB interface for evaluation on PC
  • Internal memory and SD card for data recording
  • Safety: EN 61010-1 ; CAT III 600 V
  • Accessories included: Carrying case, Strap, Test leads, Test clips, Insulation-Probe, Universal charger, Earthing rod, Car charger, rechargeable Batteries, Manual and Software CD
Display 8.9 cm / 3.5“ TFT Display; 320 x 240 Pixel
Interfaces USB, Bluetooth, SD-Card
Test Standards VDE 0100 / 0413, EN 61557-6, EN 61008, EN 61009 and IEC 60364

Functions RCD-Test, Loop/Pfc, V, Low Ohm, RE, Insulation
L-PE 0.23 Ω ~ 999 Ω ; ±(5% + 6 digits)
L-N 0.23 Ω ~ 999 Ω ; ±(4% + 4 digits)
RCD Current Multiplier x ½ ; x 1 ; x 2 ; x 5 ; ±(1% + 1 ms)
RCD Current 10 mA, 30 mA, 100 mA, 300 mA, 650 mA,1 A
RCD Trip-Time (max.) ½ I∆N: 1999 mS; I∆N: 500 mS; 2xI∆N: 150 mS; 5xI∆N: 40 mS
Voltage measurement 80 ~ 500 V AC / DC ; ±(2% + 2 digits)
Frequency 45 ~ 65 Hz ; ±2 Hz
Insulation-Test 0.125 Ω ~ 1000 MΩ @ 125 V / 250 V / 500 V / 1000 V; ±(3% + 2 digits)
Low-Ohm Test 0.000 Ω ~ 2000 Ω ; 0.001 Ω ; ±(1.5% + 3 digits)
Earth resistance 0.000 Ω ~ 2000 Ω ; 0.001 Ω ; ±(2% + 30 digits)
Safety CAT III 600V, IP65
Operating Voltage 8 x 1.2V Ni-MH Akku / 8 x 1.2V Ni-MH rechargeable battery
Battery Charger 110 – 240 V AC, 50/60 Hz / 12 V DC Adapter
Dimensions (WxHxD) 240 x 105 x 145 mm3
Weight 1560 g


Manual 2755 DE-EN


Téléchargement (3.5M)

Manual 2755 ES


Téléchargement (2.49M)

Manuel 2755 FR


Téléchargement (2.37M)

Manuale 2755 IT


Téléchargement (2.37M)

Conformity 2755


Téléchargement (864.47k)