PeakTech 5201 - Material Moisture Meter, High-Frequency, Non-Contact

High-Frequency Non-Contact Material Moisture Meter

The PeakTech 5201 is a non-contact moisture meter with a high-frequency measurement method.
It is used for the non-destructive testing of moisture in building materials of all kinds and for the detection of moisture distribution in walls, ceilings and floors.
This practical tester is particularly suitable for pre-testing walls before further processing by plastering, papering or painting, as well as for the general assessment of the risk of mold in residential buildings or for the search for moisture damage.
The local humidity, as well as the minimum and maximum recorded values, are shown on the large illuminated digital display.
To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button.
Besides the measured values, the device shows a settable message "Dry, Wet or Risk" and also makes an audible warning tone for high humidity values.
To perform a fast and accurate measurement, this meter uses the electrical resistance of the material and also performs a self-calibration after switching on the device.
The variety of functions and the user-friendly handling of this device makes it suitable for all building owners, architects, craftsmen and hobbyists. Replaceable test-probes.

• Moisture measurement of all building materials such as Plaster, Gypsum and masonry, same as wood
• Damage-free measurement with a metal sensor
• Material measurement depth of 20 to 40 mm
• Self-calibration when the device starts
• LCD display with backlight illumination
• Shock and impact resistant housing
• Easy to use and fast measurement rate
• Data-Hold and Auto-Power-Off
• Display (Dry, Risk, Wet) for good-bad reading
• Accessories: batteries, carrying case, instruction manual