Power Supplies

Laboratory Power Supply, DC 0-30V 0-5A, 5V 3A, AC Insulated from the Mains 0-250V 4.5A, Rack 19" 3U 2 in 1 laboratory AC power source combined with DC power supply. Constructed under consideration of the high safety requirements in the research, science investigation, servicing, education and industrial fields. The high-precision DC regulated power supply provides 2 adjustable outputs, one is the DC adjustable and the other the AC adjustable output, designed in high stability and performance circuit. Volt and Amper meters (3 digits LED) for indicating each of the two outputs with high accuracy and one fixed 5 V output are available. Due to the single chip integrated regulator, this output has good stability and ripple factor.

Laboratory Power Supply, DC 2 x 0-30V 0-10A, 5V 3A, Digital Meters, Rack 19" 3U A new conception of power supply for built-in into 19” racks, are ideal for service centers, schools and industries. 3 digit 14 mm green LED-displays enable the user to read the fixed values quickly and accurately. 4 mm safety jacks and as well as 19” metal cabinet are main features of this new power supply. The unit provides 2 adjustable outputs for constant voltage and current, which can be connected in parallel or in series. That means max. output voltage 60 V DC in series or max. output current 20 A in parallel.

Laboratory Power Supply, DC 2 x 0-30V 0-6A, 0-6V 0-3A, Programmable, USB RS-232 The innovative PeakTech 6181 power supply unit with color TFT display combines the advantages of a linear-controlled laboratory power supply unit with the remote control options, which have mostly been reserved by switching power supplies so far. It is operated via the graphical menu system and enables simple control and programming of its multiple features. In addition, the device is using the included PC software that allows a complete remote control. For doubling the output voltage or output current values, the two independent channels can be interconnected in serial or parallel circuit. Also a plus/minus connection of the outputs is possible.

Laboratory Power Supply, DC 0-30V 0-6A, AC 0-30V 6A, Digital Meters This high precision DC/AC power supply provides with two adjustable outputs of DC and AC. The DC voltage is stabilized and is adjustable from 0 to 30 V, the DC current limit is adjustable from 0 to 6 A. The AC voltage is adjustable from 0 to 30 V, the AC over-current LED indication is adjustable from 0 to 6 A. Both the blue colour 3 digits LCD volt and ampere meters guarantee the indication of each of the two output with high accuracy. Especially conceived for servicing of AC-circuits, transformers, illumination, etc.

Laboratory Switching Power Supply, DC 1-16V 0-60A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels.

Laboratory Switching Power Supply, DC 1-32V 0-30A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles.

Laboratory Switching Power Supply, DC 1-60V 0-15A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles.

Laboratory Switching Power Supply, DC 1-16V 0-60A, Analog Remote Control This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action control knobs (coarse and fine set) make the voltage and current regulations very smooth, precise and fast, due to the rotary encoder with microprocessor control. Setting the CC current limiting can be done in open circuit at...

Laboratory Switching Power Supply, DC 1-32V 0-30A, Analog Remote Control This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action control knobs (coarse and fine set) make the voltage and current regulations very smooth, precise and fast, due to the rotary encoder with microprocessor control. Setting the CC current limiting can be done in open circuit at...

Laboratory Power Supply, DC 2 x 0-30V 0-5A, 3-6.5V 3A, 8-15V 1A, Digital Meters New quad-channel linear regulated power supply in modern design and latest technology. Meters for the voltage and current indication with 4-digits 14 mm blue LED-displays enable the user to read the fixed values quickly and accurately. Continuously adjustable voltage and current output, the constant voltage and constant current modes are switched automatically and the current-limit protection point can be set arbitrarily. The power supply provides four adjustable outputs, two of which are constant voltage or constant current, which can be connected in series or parallel, that means max. output voltage 60 V DC (in series) and max. output current 10 A DC (in parallel).

Laboratory Switching Power Supply, DC 1-40V 0-5A, Programmable, RS-232C, RS-485 This series of user friendly programmable power supplies are ideal for repetive procedure in testing, production, or R&D environment. The unit is controlled by MCU (micro-controller unit) coupled to regulated Switching Mode Power Supply. Nine user presets of output voltage and current are available for instant recall. A sequence of up to 10 programmed output of voltages, currents and time intervals can be set and activated via the unit´s keypad or PC interface.

Laboratory Switching Power Supply, DC 1-20V 0-10A, Programmable, RS-232C, RS-485 This series of user friendly programmable power supplies are ideal for repetive procedure in testing, production, or R&D environment. The unit is controlled by MCU (micro-controller unit) coupled to regulated Switching Mode Power Supply. Nine user presets of output voltage and current are available for instant recall. A sequence of up to 10 programmed output of voltages, currents and time intervals can be set and activated via the unit´s keypad or PC interface.

Laboratory Power Supply, DC (not Leveled) 0-30V 5A, AC 0-30V 5A, Digital Meters New developed power supply for DC and AC especially concepted for science investigation, technical education, electrical industry and servicing of AC-circuits, transformers, illumination. The durable power supply matches easy handling with good performances.

Laboratory Power Supply, DC 2 x 0-30V 0-5A, 5V 3A, Digital Meters New linear regulated power supply in modern design and latest technology. Meters for the voltage and current indication with 3-digits 14 mm blue LED-displays enable the user to read the fixed values quickly and accurately. Continuously adjustable voltage and current output, the constant voltage and constant current modes are switched automatically and the current-limit protection point can be set arbitrarily. This model provides 2 adjustable outputs for constant voltage and current, which can be connected in series or parallel, that means max. output voltage 60 V DC (in series) and max. output current 10 A DC (in parallel).

Laboratory Switching Power Supply, DC 1-16V 0-40A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The new developed control of the USB 2.0-interface via PC-Software gives the user the ability to run cyclical operations with programmable voltage, current, period of time and cycles.

Laboratory Switching Power Supply, DC 1-32V 0-20A, Programmable, USB This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have a small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels.

Laboratory Switching Power Supply, DC 1-30V 0-30A, Digital Meters A newly developed switching mode power supply for a wide range of applications in the telecommunications, laboratory and industry. This power supply has an extraordinary resistance to RF interference from close range. The constant-current protection, over voltage protection and protection against over-temperature at constant current ensure high reliability and durability of this power supply.

Laboratory Power Supply, DC 2 x 0-30V 0-5A, 5V 3A, Digital Meters Digital power supply microprocessor controlled with improved stability and digital control of output voltage and current limitation. The microprocessor controls the digital voltage and current meters, the setting of the voltage and current, the stability and precision of the output. This technique improves the accuracy of the stabilization and of the regulations and makes more easy and intuitive the use of the power supply. The unit provides 2 adjustable outputs for constant voltage and current, which can be connected in parallel or in series. That means max. output voltage 60 V DC in series or max. output current 10 A in parallel.

Laboratory Switching Power Supply, DC 1-16V 0-40A, Analog Remote Control This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action control knobs (coarse and fine set) make the voltage and current regulations very smooth, precise and fast, due to the rotary encoder with microprocessor control. Setting the CC current limiting can be done in open circuit at...

Laboratory Switching Power Supply, DC 1-32V 0-20A, Analog Remote Control This high graded Switching Mode Power Supply is designed for a wide range of applications for telecommunications, laboratory and industry. The power efficient circuit design allows units to have small form factor with low profile and small footprint casing. The intelligent fan speed control program checks the fan at power on and adapts the right speed to ensure a quiet and safe operation of the power supply at different ambient temperatures and power output levels. The dual action control knobs (coarse and fine set) make the voltage and current regulations very smooth, precise and fast, due to the rotary encoder with microprocessor control. Setting the CC current limiting can be done in open circuit at...