Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 13 products.

Sort by:

PeakTech 4145-5A - Current Clamp Adapter AC, 5A 8mm, with BNC Plug

Current Clamp Adapter AC, 5A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 5A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$108.41

PeakTech 2040 - Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2040 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 20.000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$114.92

PeakTech 4145-50A - Current Clamp Adapter AC, 50A 8mm, with BNC Plug

Current Clamp Adapter AC, 50A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 50A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$118.83

PeakTech 3445 - Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TRMS, Backlit (LCD, Buttons), BT, IP67

Digital Multimeter 3 5/6 digits (5999) 17mm, Bargraph, 1000V AC/DC, TrueRMS, Frequency Meter, Thermometer K, Backlit, Illuminated Function Buttons, Bluetooth, IP67 The PeakTech 3445 is a new developed digital multimeter for heavy duty use with a high variety of useful measurement functions. As unique function, this device has illuminated function buttons and rotary switch, so you can use this IP67 waterproof device even under worst conditions and in total darkness. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this device has a Temperature measutment function, MAX/MIN, Peak and Data-Hold, among many other things.

$129.68

PeakTech 4145-100A - Current Clamp Adapter AC, 100A 13mm, with BNC Plug

Current Clamp Adapter AC, 100A 13mm, with BNC Plug Professional measuring transducer that allows accurate measurements of currents up to 100A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$129.68

PeakTech 2705 - Digital Multimeter 3 ¾ digits (3999) 28mm, Milliohmmeter 400 mΩ - 40 MΩ, 4 or 2 Wires Measurement

Digital Multimeter 3 ¾ digits (3999) 28mm, Milliohmmeter 400 mΩ - 40 MΩ, 4 or 2 Wires Measurement This multimeter milliohmmeter enables measurements of 100 µΩ up to 40 MΩ. By passing a constant current through the device the voltage across can be determined.

$130.11

PeakTech 3441 - Digital Multimeter 4 5/6 digits (59999) 14mm, Bargraph, 1000V DC/AC, TRMS, Frequencymeter, Thermometer K,Backlit

Digital Multimeter 4 5/6 digits (59999) 14mm, Bargraph, 1000V AC/DC, TRMS, Frequencymeter, Thermometer K, Backlit The new PeakTech 3441 is a practical digital multimeter for heavy duty use with a high variety of useful measurement functions. By keystroke, the display of the device can be switched between 3 5/6-digit LCD and a high resolution 4 5/6-digit LCD, whereas all measurements are gathered as True RMS values. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this new developed device has a 4-20mA current loop measurement, low-pass filter and an Auto-Hold function, among many other things.

$136.19

PeakTech 3430 - Digital Multimeter 4 ½ digits (21999) 21mm, TRMS, Frequency Meter, USB

Digital Multimeter 4 ½ digits (21999) 21mm, TrueRMS, Frequency Meter, USB New constructed and GS approved high class digital multimeter with 4 ½ digits multifunction display (max. 21999), 46 segments analogue bargraph and integrated USB interface for easy connection with computer to realize macro recording, monitoring and capture of transient dynamic data. Full input protection, backlight and easy operating for choosing several measurement functions with the help of the clear view pushbutton section. The True RMS AC voltage and current readings are other most important features of this new constructed multimeter.

$140.53

PeakTech 8100 - Measurement Equipment Set "DMM & Clamp Probes"

Measurement Equipment Set "DMM & Clamp Meter" The PeakTech 3415 Digital Multimeter features a True RMS measurement and is suitable for a variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for live data recording of all measured values to a PC. To complete this measurement device kit the current clamp adapter PeakTech 4200 for the multimeter is integrated, which can measure AC currents up to 200 A. For daily use in the field of electronics, this set also features the alligator clips PeakTech 7015, and the appropriate safety connecting cables PeakTech 7020.

$150.84

PeakTech 3442 - Digital Multimeter 4 5/6 digits (59999) 14mm, Bargraph, 1000V AC/DC, TRMS,Frequencymeter,Thermometer K,Bluetooth

Digital Multimeter 4 5/6 digits (59999) 14mm, Bargraph, 1000V AC/DC, TRMS, Frequencymeter, Thermometer K, Bluetooth The new PeakTech 3442 is a practical digital multimeter for heavy duty use with a high variety of useful measurement functions. By keystroke, the display of the device can be switched between 3 5/6-digit LCD and a high resolution 4 5/6-digit LCD, whereas all measurements are gathered as True RMS values. In addition to the comprehensive measurement functions for current, voltage, capacity, resistance and many more, this new developed device has a 4-20mA current loop measurement, low-pass filter and an Auto-Hold function, among many other things.

$157.89

PeakTech 8101 - Measurement Equipment Set "Electro"

Measurement Equipment Set "Electro" Designed for daily use in electronics, this case system contains everything needed for installation and maintenance of all electrical equipment. DC and AC voltages, currents up to 80 A or 5A can be ideally measured with the PeakTech 4350 Clamp multimeter in highly accurate resolution of 1 mA, also capacitors, resistors and even temperatures. For quick voltage tests before working on an electrical installation, the PeakTech 1030 provides an easy way of measurement through a noncontact sensor to check if the measured system is live or voltage-free. The two-pole voltmeter PeakTech 1095 has 7 LEDs for the display of voltages between 12 V and 690 V and can also be used as a continuity tester.

$161.69

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52