Home

PeakTech 3204 - Galvanometer with Central Zero DC, ±100mV ±50µA/5mA

Galvanometer with Central Zero DC, ±100mV ±50µA/5mA This new galvanometer moves the pointer relative to the direct current between the positive and negative side of the scale and thus can show the current flow.

$59.58

PeakTech 3203 - Analog Ammeter DC/AC, 5-500mA/10A

Analog Ammeter DC/AC, 5-500mA/10A This analog ammeter provides a clear current display in DC and AC range.

$59.58

PeakTech 3202 - Analog Voltmeter DC/AC, DC 20kΩ/V 0.1-500V

Analog Voltmeter DC/AC, DC 20kΩ/V 0.1-500V This analog voltmeter provides a clear voltage display in DC and AC voltage range.

$59.58

PeakTech 3201 - Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A

Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A Ranges of voltages in DC from 0.1 V to 500 V. Ranges of voltages in AC from 10 V to 500 V. Ranges of currents in DC from 50 μA to 10 A. Ranges of resistances at center of scale from 20 Ω to 2 MΩ. This analog Multimeter has a wide range of measurement functions, including AC and DC voltages, DC-current, a resistance measurement with continuity tester and a dB measurement.

$59.58

PeakTech 2802 - Laser Distance Meter up to 80 m, Area and Volume

Laser-Distance-Meter This professional laser distance meter with multiline LCD display and backlight is specifically designed for distance measurements of high accuracy and faraway, hard to reach places. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation allow a fast and reliable measurement. 99 recorded readings can be stored to the internal memory by keystroke to recall these values again later. In addition, a 90° angle try square at the lower end of the measuring device can be expanded in order to ensure a precise alignment to the measuring point. Hereby, this new laser distance meter offers a high variety of functions for the daily use in building sector, the architecture, land- scaping or many other areas.

$75.85

PeakTech 2801 - Laser Distance Meter up to 60 m, Area and Volume

Laser-Distance-Meter This professional laser distance meter with multiline LCD display and backlight is specifically designed for distance measurements of high accuracy and faraway, hard to reach places. Shortcut keys for addition, subtraction, Pythagoras, area and volume calculation allow a fast and reliable measurement. 99 recorded readings can be stored to the internal memory by keystroke to recall these values again later. In addition, a 90° angle try square at the lower end of the measuring device can be expanded in order to ensure a precise alignment to the measuring point. Hereby, this new laser distance meter offers a high variety of functions for the daily use in building sector, the architecture, land- scaping or many other areas.

$65.00

PeakTech 2675 - Analog Insulation Tester 250/500/1000 V DC400 MΩ

Moving Coil Meter Analogue Insulation Tester @ 250/500/1000 V DC, 400 MΩ Every electrical apparatus and installation need to be safe for the user and for the equipment itself. Electrical conductors of electricity need to be insulated from each other, so that they do not create electrical hazard. Badly insulated circuits can create leakage current which can be dangerous and trip your GFCI, RCCB or ELCB. Each country regulates those levels at which the insulation is acceptable. Check the continuity of wires, complete circuits connections, closure of contacts, circuit breakers, fuses, bounding resistance of connections, etc. are all very important.

$215.41

PeakTech 2180 - Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer

Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer This combined handheld digital multimeter and LCR meter can be used universally for the service and maintenance sector, due to its high versatility. Large 3 5/6-digits liquid-crystal display (max. 5999) with an analog bargraph and backlight illumination. In addition to the multimeter functions such as voltage, current and frequency measurement, this machine also has measurement functions for inductance, capacitance and resistance. As additional feature, temperatures can be measured with the enclosed K-type probe. For professional use in the field, this device is IP67 dust, & water proof against short-time immersion, and thus naturally also protected against rain and spray.

$108.41

PeakTech 2175 - LCR Meter, 4 ½ digits, 100 Hz - 1 kHz

LCR Meter, 4 ½ digits, 100 Hz - 1 kHz This digital LCR meter is our newest development and features a large 4 ½ digit LCD display (max 11000), which provides a fast and accurate reading of measured values. The meter is capable of measuring up to 110 mF, which is very useful when testing capacitors in audio equipment or in the area of amateur radio. Inductance (coils) can be measured up to 20 H and resistors up to 110 MΩ. Additionally, the device includes a diode and continuity test. Through the simple operation and the technical capability of this LCR meter, it is the ideal tool in the service and repairs.

$86.71

PeakTech 2170 - LCR-ESR Meter, 4 ½ digits, 100 Hz - 100 kHz, USB

LCR-ESR Meter, 4 ½ digits, 100 Hz - 100 kHz, with USB interface This newly developed digital LCR meter with ESR (equivalent series resistance) is equipped with many functions and is, by its compact design, ideal both for component testing in the workplace, as well as for service and maintenance. The illuminated multifunction display with bargraph and high measurement frequency of up to 100 kHz allows a highly precise work. With the included PC software it is possible to store and evaluate the measured values.

$292.89

PeakTech 2040 - Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 20000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2040 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 20.000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$114.92

PeakTech 2035 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS, USB The PeakTech 2035 was developed for professional use, it is equipped with a USB interface which enables to record long-term data with the PC software. It has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$82.37

PeakTech 2030 - Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS

Digital Multimeter 6000 Counts, Bar Graph, 1000V, True RMS The PeakTech 2030 was developed for professional use, it has a double-insulated injection-molded housing with an anthracite-colored rubber coating, a service compartment on the back, through which not only the battery can be replaced, but also the fuses can be exchanged. The device has an inverted LCD display with 6,000 Counts and Bar Graph. It is Autorange and supports measurements for DCV, ACV, DCA, ACA, Ohm, Cap, Hz, °C, °F, diode and continuity test. Due to the high overvoltage category CAT III 1000V, you can use this device safely on electrical installations and systems.

$71.51

PeakTech 2025A - Digital Multimeter 3 5/6 digits (5999) 27mm, Autorange, Frequencymeter, Transistor hFE, Thermometer K, USB

Digital Multimeter 3 5/6 digits (5999) 27mm, Autorange, Frequencymeter, Transistor hFE, Thermometer K, USB The new PeakTech 2025A offers a multitude of measuring functions for electrical measured variables for every user from industry, trade, training, hobby and the laboratory. Particularly noteworthy is the integrated data interface, which enables this model to record long-term data in combination with the PC software. The PeakTech 2025 A can be used to measure DCV, ACV, DCA, ACA, resistance, capacity, diode, transistor, continuity, temperature and frequency, thus creating a wide range of applications. Due to the high overvoltage category CAT III up to 1000V, you can use this device safely on electrical installations and systems.

$65.00

PeakTech 2015A - Digital Multimeter 3 3/4 digits (3999) 27mm, Autorange, Frequencymeter, Thermometer K

Digital Multimeter 3 3/4 digits (3999) 27mm, Autorange, Frequencymeter, Thermometer K The new PeakTech 2015A offers a multitude of measuring functions for electrical measured variables for every user from industry, trade, training, hobby and the laboratory. The PeakTech 2015 A can be used to measure DCV, ACV, DCA, ACA, resistance, capacity, diode, transistor, continuity, temperature and frequency, thus creating a wide range of applications. Due to the high overvoltage category CAT III up to 1000V, you can use this device safely on electrical installations and systems.

$54.15

PeakTech 2005A - Digital Multimeter 3 ½ digits (1999) 32mm, Frequencymeter, Transistor hFE, Thermometer K

Digital Multimeter 3 ½ digits (1999) 32mm, Frequencymeter, Transistor hFE, Thermometer K Newly developed Digital Multimeter, which is characterized by its ease of use, modern and handy design and the extensive measurement functions. Due to the high safety standard of overvoltage category CAT III 1000V and a large digital display with backlight this device is best suitable for the education, service and industrial area.

$43.30

PeakTech 1700 - Fork Ammeter for AC, 3 5/6 digits 13mm, 200A 16mm, True RMS

Fork Ammeter for AC, 3 5/6 digits 13mm, 200A 16mm, True RMS PeakTech 1700 fork ammeter for AC allows the user to carry out quick and effective current measurements in areas that are difficult to access. Examples of this are measurements on terminal blocks in control cabinets or individual wires / lines on electrical devices. With accurate voltage, resistance and capacitance measurement, diode and continuity testing, the PeakTech 1700 can cover the most important areas of common electrical measurements. The backlit LCD display, the buttons and rotary switch illuminated and the integrated LED flashlight allow to carry out the required measurements, even in darker places.

$96.47

PeakTech 1665 - Clamp Meter DC/AC, 3 ⅚ digits 12mm, Bargraph, 60-1000A 48mm, True RMS

Clamp Meter DC/AC, 3 ⅚ digits 12mm, Bargraph, 60-1000A 48mm, True RMS, Frequency Meter, Thermometer This new professional digital clamp meter designed for measurements up to 1000A AC/DC offers a wide range of functions and is particularly impressive through the rugged, rubberized and ergonomically shaped case that ensures safe handling during the measurement and is also suitable for use in the industrial sector. Due to these outstanding features, this devices is the ideal companion for every service technician.

$140.97

PeakTech 1660 - 3-Phase Power Clamp Meter AC, 4 digits 11mm, 40-1000A 750kW 55mm, True RMS, USB

3-Phase Power Clamp Meter AC, 4 digits 11mm, Bargraph, 40-1000A 750kW 55mm, True RMS, Non Contact Voltage Detector, USB, Frequency Meter Power clamp meter for measurements of power consumption, as well as the energy consumption in single-phase or three-phase systems. In addition to other measurement functions, i.e. AC voltage and current, phase angle or power factor, during a voltage measurement this power clamp meter is capable to determine the actual absorbed power. The rugged, rubberized and ergonomically shaped case ensures a safe handling during the measurement and is also suitable for use in industrial applications.

$162.67

PeakTech 1655 - Clamp Meter DC/AC, 4 ¾ digits 11mm, Bargraph, 400-1500A 52mm, True RMS

Clamp Meter DC/AC, 4 ¾ digits 11mm, Bargraph, 400-1500A 52mm, True RMS, Frequency Meter, Thermometer This professional digital clamp meter for measurements up to 1500A AC/DC provides a rugged, rubberized and ergonomically shaped case that ensures a safe handling during the measurement and also suitable for use in industrial applications. The integrated voltage detector enables the detection of live wires and the clamp meter includes inrush current measuring function for measuring the maximum currents, i.e. of electrical motors.

$130.11