PeakTech 4135-1 - Spectrum analyzer 2.2 GHz
Digital Spectrum Analyzer 9 kHz ~ 2.2 GHz
Spectrum analyzers are used to display the amplitude distribution over a certain frequency range.
This spectrum analyzer thus makes visible the individual spectral components with the corresponding amplitudes, which is making this device indispensable for the assessment and diagnosis of modern, high-frequency electronic systems.
Due to the high frequency bandwidth and dynamic, modern spectrum analyzers are superior in many measurement areas contrary to the use of oscilloscopes and therefore preferable for the application.
The high technical performance and the many features makes this device ideal tools in industry, development, EMC diagnostic and quality assurance.
Digital Spectrum Analyzer 9 kHz ~ 2.2 GHz
Spectrum analyzers are used to display the amplitude distribution over a certain frequency range.
This spectrum analyzer thus makes visible the individual spectral components with the corresponding amplitudes, which is making this device indispensable for the assessment and diagnosis of modern, high-frequency electronic systems.
Due to the high frequency bandwidth and dynamic, modern spectrum analyzers are superior in many measurement areas contrary to the use of oscilloscopes and therefore preferable for the application.
The high technical performance and the many features makes this device ideal tools in industry, development, EMC diagnostic and quality assurance.
- 18 cm (7 ") TFT color display with 800 x 480 pixels
- Display of the amplitude distribution in the frequency range
- VGA output for monitoring with external displays
- Frequency range of 9 kHz to 2.2 GHz
- Measuring function for modulated AM / FM signals
- LAN port for remote control via network
- USB/RS232 connector to control by software
- USB host for data transfer to USB memory media
- Accessories: power cable, interface cable, software CD, user manual
Spectrum Analyzer | |
---|---|
Frequency range | 9 kHz ~ 2.2 GHz |
Resolution | 1 Hz (over full Bandwidth) |
Bandwidth | 10 Hz ~ 3 MHz (in 1-3-10 sequence) 200 Hz, 9 kHz, 120 kHz |
Span Range | 0 Hz, 100 Hz ~ 2.2 GHz |
Phase noise | -82 dBc/Hz (offset 10 kHz) |
Disp. Average Noise Level (DANL) | 10 MHz ~ 2.2 GHz < -120 dBM + 3x (f/1 GHz) dB (Pre. Amp. OFF), 30 MHz ~ 2.2 GHz < -135 dBM + 3x (f/1 GHz) dB (Pre. Amp. ON) |
Amp. Measurement | DANL up to +30 dBm |
Level Display | dBm, dBmV, DBµV, V, W |
Trigger Source | Free, Video, External |
Triggerlevel (Ext.) | 5 V TTL |
Tracking Generator | |
Tracking Generator Freq. | 9 Hz ~ 2.2 GHz |
Output Power | -20 dBm ~ 0 dBm, step 1 dB |
Flatness 20 Mhz ~ 2.2 Ghz | ± 2 dB |
General specifications | |
Interfaces | USB-Host, USB Device, LAN, RS232, VGA |
Operating voltage | 100 ~ 240 V AC; 50/60 Hz |
Dimensions (WxHxD) | 365 x 155 x 300 mm3 |
Weight | 6 kg |
2 other products in the same category: