Cart (empty) 0

PeakTech 1286 - Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based with USB & LAN

1286
$423.11

Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based with USB & LAN

This small and powerful PC oscilloscope is ideal for mobile use on a laptop or for permanent installation in control cabinets.
For fast display of any incoming waveform one press of the autoset button is enough and the oscilloscope itself will search for the best possible display.
Of course, all models in this series have an XY mode and an FFT function.
Data transfer to the PC takes place via an isolated LAN connection, using a supplied AC adapter to power the oscilloscope, or via the USB interface, whereby the unit is directly supplied via USB interface.

Available
Security HTTPS protocol
Fast shipment worldwide
At your service 365 days a year

Digital Oscilloscope, 2 Channels, 100 MHz, 1 GS/s total, PC based with USB & LAN

This small and powerful PC oscilloscope is ideal for mobile use on a laptop or for permanent installation in control cabinets.
For fast display of any incoming waveform one press of the autoset button is enough and the oscilloscope itself will search for the best possible display.
Of course, all models in this series have an XY mode and an FFT function.
Data transfer to the PC takes place via an isolated LAN connection using a supplied AC adapter to power the oscilloscope, or via the USB interface which also powers the oscilloscope.

  • 2-channel 100 MHz PC oscilloscope with 1 GS/s sampling rate
  • Memory length of 10 million points per channel
  • XY mode and FFT function
  • Data transmission via isolated LAN interface or via USB interface
  • Input voltage max. 40 Vpp
  • Accessories: 2 probes, 2 cables BNC-BNC 1m, USB cable, mains adapter, manual, software CD
Bandwidth 100 MHz
Channels 2
Acquisition
Sampling mode Normal, Peak detection, Averaging
Sampling rate - One Channel 1 GS/s
Sampling rate - Two Channels 500 MSa/s each
Vertical resolution 8 Bits
Input
Input coupling DC, AC, GND
Input impedance 1 MΩ ± 2 % in parallel with 15 pF ± 5 pF
Probe damping factor 1X, 10X, 100X, 1000X
Max. input voltage 40 V (DC + AC peak-to-peak)
Channel Isolation @50Hz 100:1
Channel Isolation @10MHz   40:1
Bandwidth limit 20 MHz, or full bandwidth
Time delay between channels 150 ps (typical)
Vertical system
Sensitivity 2 mV/div - 5 V/div
Rise time < 3.5 ns
DC accuracy ±3 %
Horizontal system
Scanning speed 2 ns/div - 100 s/div
Trigger
Trigger type Alternate / Edge / Video / Pulse / Slope
Trigger mode Auto, Normal, Single
Measurements
Cursor △ V and △ T between cursors
Automatic Vmin, Vtop, Vbase, Vamp, Vavg, Vrms, Overshoot, Preshoot, Freq, Period, Rise Time, Fall Time, Delay A→B +Width, -Width, +Duty, -Duty
Phase difference ±3 °
Record
Record length 10,000,000 points/CH
Common specifications
Interfaces USB, LAN
Operating voltage 5 - 15 V DC, 1.2 A, < 8W
Dimensions (WxHxD)   190 x 120 x 18 mm3
Weight 0.38 kg

Download

Manual 1286-EN

PeakTech_1286_1326_1331_12-2022_EN.pdf

Download (2.61M)