Cart (empty) 0

List of products by brand PeakTech

PeakTech 7100 - Magnet Holding Kit for Multimeters and Tools with Velcro

Magnet Holding Kit for Multimeters and Tools with Velcro This magnetic holder is used to mount your measuring instrument on metal walls, e.g. doors of a subdivision, in switch cabinet construction, the motor vehicle repair or even in shipbuilding. In addition to the magnetic function, the mounting kit also offers a flap hanger opening for attachment to wall hooks and holders of non-magnetic substrates, so the devices can also be easily attached to “lock and load” or other mounting systems. With the tear-resistant strap many measuring instruments such as multimeters, laboratory thermometer, insulation testers and various environmental measuring devices can be attached to the magnetic holder.
$8.57

PeakTech 7005 - Pair of Test Leads 100cm 1000V 10A with Plugs 4mm and Extension

Pair of Test Leads 100cm 1000V 10A with Plugs 4mm and Extension This new product of test accessories in 4 mm technique can be combined with almost all measuring devices, generators and power supplies. Maximum safety is achieved through the double insulation of the wires and the contact protection against conductive metal parts in the closed state. Thus, this accessory is perfectly suitable for use in training and service area.
$9.66

PeakTech 7015 - Pair of Alligator Clamps 1000V 10A for Plugs 4mm

Pair of Alligator Clamps 1000V 10A for Plugs 4mm This new product of test accessories in 4 mm technique can be combined with almost all measuring devices, generators and power supplies. This accessory is perfectly suitable for use in training and service area.
$9.66

PeakTech 7035 - Pair of Cables with Crocodile Clips for Low Voltage Laboratory Power Supplies

Pair of Cables with Alligator Clips for Low Voltage Laboratory Power Supplies These cables with 4 mm banana plugs are suitable for use in SELV / PELV low voltage circuits and are therefore particularly suitable for low voltage laboratory power supplies. At one end they have a 4mm banana plugs, each both male and female (stackable) not insulated, at the other end they have an alligator clip to connect the load.
$9.66

PeakTech 7705 - Ceramic Fuse F, 200mA 250V 5x20mm, 10 Pieces

Ceramic Fuse F, 200mA 250V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.
$10.74

PeakTech 7740 - Ceramic Fuse F, 20A 250V 5x20mm, 10 Pieces

Ceramic Fuse F, 20A 250V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.
$10.74

PeakTech 4123A - Universal Transformer, AC 12V 1.67A (20VA)

Universal Transformer, AC 12V 1.67A (20 VA) Ideal for use with Halogen (indoor) lamps and other low voltage consumer products. With this adaptor you have a galvanic separation between line voltage and low voltage. With 1,8 meter cable and low voltage plug Output plug: outer diameter 5.5 mm, inner diameter 2.1 mm Safety: EN-61558-2-6
$10.74

PeakTech 7045 - Pair of Stackable Cables for Low Voltage Laboratory Power Supplies

Pair of Stackable Cables for Low Voltage Laboratory Power Supplies These cables with 4 mm banana plugs are suitable for use in SELV / PELV low voltage circuits and are therefore particularly suitable for low voltage laboratory power supplies. At both ends they have 4 mm banana plugs, each both male and female (stackable), not insulated.
$10.74

PeakTech 1030 - Voltage Detector 50 - 1000 V AC non Contact, with Buzzer

Voltage Detector 50 - 1000 V AC non Contact, with Buzzer Easy to use, for non-contact detection of AC voltage from 90 V to 1000 V. Suitable for outlets or for wire insulation testing. Suitable for conductor tracking of flush-mounted cables and localisation of line interruptions. If AC-voltage is at the measuring point, it is visually indicated by a flashing red LED and the integrated buzzer sounds. The probe lights green when the measuring point is free of voltage.
$12.91

PeakTech 7510 - Ceramic Fuse FF, 500mA 1000V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 500mA 1000V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.
$12.91

PeakTech 3127 - Universal Switching Power Supply, CC 3-12V 1.5A, Input AC 100-240V

Universal Switching Power Supply, CC 3-12V 1.5A, Input AC 100-240V AC/DC-Adaptor in latest eco-friendly-technology. Combined with the wide range of line voltage from 100 - 240 V AC max. output current of 1500 mA and output voltage of 3 - 12 V DC; together with the included connector adapter set of 7 pieces this AC/DC adapter can be used very universally. The powerful unit is provided with short circuit protection, automatic thermal and overload cut off.
$14.00