Home

PeakTech 7245 - Tool Case 400 x 300 x 150 mm, Aluminium Color

Tool Case 400 x 300 x 150 mm 3 , Aluminium Color Practical tool case with adjustable compartments and, in the lid, a removable tool holder with 13 places. This high-quality aluminum frame case, which can be locked with a combination lock, protects delicate tools and instruments while traveling or on the way to work. Behind the removable holder for tools in the case lid there is space for folders and documents in A4 format, so that your important documents can also be transported safely. In addition to the sturdy structure with reinforced edges and rounded corners, this case has four rubber feet on the bottom-part to place it on a table.

$42.21

PeakTech 5002 - Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.

Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max. An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed. Output of automatic test voltage from 0 to 300V 3 digit LED display of the output voltage Test of individual LEDs or LED panels Test of Zener Diodes Test the withstand voltage of Electrolytic Capacitors Robust plastic housing Safety: EN 61010-1 Accessories: Carrying case, Test Leads, Power Cable, Operation Manual

$60.66

PeakTech 8101 - Measurement Equipment Set "Electro"

Measurement Equipment Set "Electro" Designed for daily use in electronics, this case system contains everything needed for installation and maintenance of all electrical equipment. DC and AC voltages, currents up to 80 A or 5A can be ideally measured with the PeakTech 4350 Clamp multimeter in highly accurate resolution of 1 mA, also capacitors, resistors and even temperatures. For quick voltage tests before working on an electrical installation, the PeakTech 1030 provides an easy way of measurement through a noncontact sensor to check if the measured system is live or voltage-free. The two-pole voltmeter PeakTech 1095 has 7 LEDs for the display of voltages between 12 V and 690 V and can also be used as a continuity tester.

$161.69

PeakTech 6205 - Laboratory Power Supply, DC 0-30V 0-5A, Digital Meters

Laboratory Power Supply, DC 0-30V 0-5A, Digital Meters New linear regulated power supply in modern design and latest technology. Meters for the voltage and current indication with 3-digits 14 mm blue LED-displays enable the user to read the fixed values quickly and accurately. Continuously adjustable voltage and current output, the constant voltage and constant current modes are switched automatically and the current-limit protection point can be set arbitrarily.

$162.24

PeakTech 6140 - Laboratory Power Supply, DC 0-30V 0-5A, Digital Meters

Laboratory Power Supply, DC 0-30V 0-5A, Digital Meters New linear regulated power supply in modern design and latest technology. Meters for the voltage and current indication with 3-digits 14 mm blue LED-displays enable the user to read the fixed values quickly and accurately. Continuously adjustable voltage and current output, the constant voltage and constant current modes are switched automatically and the current-limit protection point can be set arbitrarily.

$215.95

PeakTech 6125 - Laboratory Power Supply in 1V steps, DC 1-15V 5A + AC 1-15V 5A

Laboratory Power Supply in 1V steps, DC 1-15V 5A + AC 1-15V 5A New developed power supply for DC and AC voltages. Especially concepted for science investigation, technical education, electrical industry and servicing of AC-circuits, transformers, illumination. The durable power supply connects easy handling with a good performance.

$237.66

PeakTech 6150 - Laboratory Power Supply, DC 0-30V 0-5A, 5V 500mA, 12V 500mA, Digital Meters

Laboratory Power Supply, DC 0-30V 0-5A, 5V 500mA, 12V 500mA, Digital Meters New linear regulated power supply in modern design and latest technology. Meters for the voltage and current indication with 3-digits 14 mm blue LED-displays enable the user to read the fixed values quickly and accurately. Continuously adjustable voltage and current output, the constant voltage and constant current modes are switched automatically and the current-limit protection point can be set arbitrarily.

$237.66

PeakTech 5145 - Pressure-Difference & Air Flow Meter with USB

"2 in 1" Professional Pressure-Difference & Air Flow Meter with USB Microprocessor controlled 2 in 1 meter for determining pressure, pressure difference, Air Velocity and Air Flow, with a digital multi-function display and backlighting. The ambient and air temperature can be additionally detected. This combination device enables the use in installation, diagnostics, repair, maintenance and optimization of air conditioning, heating and ventilation systems and uses a pitot tube to capture the different readings. The USB interface and the software are used for recording of measurement values over extended periods and read out the built-in memory of 99 measurement readings.

$238.20

PeakTech 2240 - Isolation Transformer, 230V 50-60Hz 500W

Isolation Transformer, 230V 50-60Hz 500W Under consideration of the high safety requirements in the service centers, schools and industry it is absolutely necessary to use AC power source. This power source is provided with a galvanic separation between primary and secondary voltage for measuring and servicing of open instruments granting a high safety standard.

$238.63

PeakTech 8102 - Measurement Equipment Set "Service"

Measurement Equipment Set "Service" For daily use in the service area designed, this case system contains everything needed for installation and maintenance of all electrical installations and other systems in the industrial and crafts area. The PeakTech 2025 Digital Multimeter is suited for a high variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for data recording of all measured values to the PC. The PeakTech 4945 IR-Thermometer enables rapid, simple and accurate measurement of surface temperatures, with laser pointer for noncontact, fast temperature measurement of hot or moving objects or difficult measuring points from a safe distance.

$291.92

PeakTech 6130 - Laboratory Power Supply in 1V steps, DC 1-15V 10A + AC 1-15V 10A

Laboratory Power Supply in 1V steps, DC 1-15V 10A + AC 1-15V 10A New developed power supply for DC and AC voltages. Especially concepted for science investigation, technical education, electrical industry and servicing of AC-circuits, transformers, illumination. The durable power supply connects easy handling with a good performance.

$302.77

PeakTech 2275 - Electronic Load, DC 150W 360V 30A, USB

Electronic Load, DC 150W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$432.99

PeakTech 2280 - Electronic Load, DC 300W 360V 30A, USB

Electronic Load, DC 300W 360V 30A, USB This newly developed electronic load with PC interface can be used in important testing procedures for quality assurance as well as e.g. the examination of power and control equipment, batteries, fuel cells and solar cells. For precise load control for the various applications, this device provides Constant Voltage (CV), Constant Current (CC), a Constant Resistance (CR) or a Constant Power (CP) as load control modes with a highly accurate resolution of 1 mW, 1 mV, 1 mΩ and 1 mA. In additon, the device has several automated test modes, for example a battery test or the dynamic test. The PC interface and the Software allow freely programmable test sequences to be implemented.

$758.55

PeakTech 2685A - High Voltage Insulation Tester 10,000 V DC, 2 TΩ

High Voltage Insulation Tester 10,000 V DC, 2 TΩ PeakTech 2685A is a high voltage insulation meter capable of generating a test voltage up to 10,000 V DC. Check the insulation of electrical lines or equipment and identify faulty ones. The measuring functions can be set quickly using the selector switch and the pushbuttons. Built into a sturdy carrying case which also protects it from splash water and external influences. With the new additional functions PI (Polarization Index) and DAR (Dielectric Absorption Ratio) the possible applications of the PeakTech 2685A are very wide. Due to its many functions the PeakTech 2685A is ideal for everyday use in electrical engineering as it can be used in almost every area in which insulation measurement is required.

$792.08