Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 7 products.

Sort by:

PeakTech 5315 - pH-Meter 0.00 - 14.00 with Backlight

pH-Meter 0.00 - 14.00 with Backlight The PeakTech 5315 pH-meter has a long and thin measuring probe specially developed for laboratory use, which can be used for flasks, beakers or cylinders. The probe can be easily removed thanks to its screw attachment. The LCD display is backlit and is easily readable. In the upper part there are the On/Off switch and two trimmers for pH 7 and pH 4 calibration. The two necessary buffer solutions for calibration are included.

$34.62

PeakTech 3705 - Digital Capacity Tester, 3 ½ digits, 8/80/800Hz

Digital Capacity Tester, 3 ½ digits, 8/80/800Hz Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.

$40.04

PeakTech 1041 - Digital Multimeter, 3 ¾ digits (3999), Auto Range, TrueRMS, Contactless Detector, Multifunction

Digital Multimeter, 3 ¾ digit (3999), Automatic Range, True RMS, Contactless Detector, Capacimeter, Frequency Meter, Thermometer Compact 3 ¾ digit multimeter with protective shell, True RMS, multifunction. LCD display, 3 ¾ digit, max. 3999 True RMS Value Measurements DC and AC voltages up to 600V DC and AC currents up to 10 A Automatic or Manual Range Data Hold, Minimum and Maximum, Relative Value Auto shutdown Battery charge status indication Fuse in the battery compartment Sturdy double shell container Compliant with safety standards: EN 61010-1; CAT III 600V / CAT IV 300V Diode and continuity test Test 1.5V and 9V batteries Accessories: carrying case, test leads, 2 x AAA 1.5 V batteries, manual

$41.13

PeakTech 3349 - Digital Multimeter, 3 5/6 digits (5999) 22mm, TrueRMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector

Digital Multimeter, 3 5/6 digit (5999), True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3349 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.

$45.47

PeakTech 5201 - Material Moisture Meter

Material Moisture Meter This new instrument is used for non-destructively tracing dampness in building material of all kinds as well for detecting damp distribution in walls, ceilings and floors. The absolute humidity, as well as the minimum and maximum measured moisture are here shown in the large, illuminated digital display. To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button. Besides the measured values, the device shows a settable message "Dry, Wet or Risk" and also makes an audible warning tone for high humidity values.

$97.56

PeakTech 5125 - Pure Water Tester

Pure Water Tester To measure the conductivity value (ranging from 0 - 2000 µS) which can therefore judge whether water is pure or not. The conductivity value will become lower if there is much less impurities existed in water (for example, distilled water that its purity is higher than others will get a lower conductivity value of approx. < 10 µS). In industrial sectors, it would be a great help for the quality of the products if using the good water (more pure water) in the process. It may cause several diseases if home drink water existing high conductivity & contain impurities, the (pure water tester) are designed to check the purity of water (water conductivity) also can determine the conduction of the “water filter” easily and rapidly.

$140.53

PeakTech 5500 - Frying Oil Tester

Oil-Tester This device has been developed for the fast and reliable testing of frying oils in the catering industry, large kitchens, but also the private user. Also this unit displays the oil temperature, so that the appliance settings and indicators of the fryer can be checked. By measuring the TPM value (total polar material), the content of polar substances can be determined, which characterizes a reliable parameter for the extent of the aging of the frying oil / fat during frying.

$248.51