Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 24 products.

Sort by:

PeakTech 1030 - Voltage Detector 50 - 1000 V AC non Contact, with Buzzer

Voltage Detector 50 - 1000 V AC non Contact, with Buzzer Easy to use, for non-contact detection of AC voltage from 90 V to 1000 V. Suitable for outlets or for wire insulation testing. Suitable for conductor tracking of flush-mounted cables and localisation of line interruptions. If AC-voltage is at the measuring point, it is visually indicated by a flashing red LED and the integrated buzzer sounds. The probe lights green when the measuring point is free of voltage.

$12.91

PeakTech 1031 - Voltage Detector 50 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight

Voltage Detector 50 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 50V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

$18.34

PeakTech 1032 - Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight

Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

$23.77

PeakTech 1020A - Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight

Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight An easy to use and safe Multimeter with integrated protection frames, pocket sized for AC/DC voltage, current and resistance measurements, and non-contact voltage detection, with built-in flashlight. This devices uses an self-resetting PTC fuse for it's mA measurement range.

$31.36

PeakTech 1095 - Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper

Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper TÜV/GS-approved 2-pole voltage tester with LED-display for DC and AC measurement from 12 V to 690 V provides further a wide range of measurement functions. The highlights are the measuring point illumination, continuity test with visual and audible signal and the phase and direction indicator.

$42.21

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...

$45.47

PeakTech 2525 - 3-Phase Rotation Tester with LED-display

3-Phase Rotation Tester with LED-Display Determines rotary field direction, non-contact rotary field indication and determines the motor connection. Compact and handheld combitester designed according to safety standard CAT III 300 V. In modern style, essential, ideal for use in power installation. Allows contactless determination of the turning direction of unconnected motors or motors in the off status as well as of rotating fields. Electronic 3-phase measurements and test of phase breakdowns.

$48.72

PeakTech 2530 - 3-Phase Rotation Tester with LCD-display

3-Phase Rotation Tester with LCD-display New handheld tester designed according to safety standard CAT III 600 V in modern, compact style, for checking phase sequence and rotation. LCD-Displays provided on the unit will show wether the phase is open or which phase in open at a glance.

$48.72

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

$48.72

PeakTech 3365 - LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm

LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm The tester is a newly designed and very practical tester that can easily read the correct pin configuration of cables by comparing one transmitting end to the corresponding receiving end. It is easy to verify the cable continuity, open, short and cross connect.

$59.58

PeakTech 1090 - AC/DC Voltage Tester with RCD Test and LCD Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and LCD Display 3 ½ digits TÜV/GS-approved 2-pole voltage tester with backlight LCD 3½ digits display and bargraph for AC and DC measurement from 6 V to 400 V AC, 690 V DC. It offers also the possibility of continuity test with visual and audible signal, phase and direction indicator, and the testing of residual current devices (RCD).

$71.51

PeakTech 3435 TR - Transmitter for Electric Cables Detector PeakTech 3435

Transmitter for Electric Cables Detector PeakTech 3435 Additional transmitter to be used in conjunction with the cables detector PeakTech 3435 to allow simultaneous tracking of multiple conductors.

$75.85

PeakTech 1096 - AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits PeakTech 1096 is a new instrument for measuring voltages accurately and quickly at the same time thanks to a 3 ½ digit backlit LCD display and a coarse LED indication of the usual voltage range. A single phase test and a direction of rotation display for 3-phase systems are already integrated in this model. The low impedance measurement function can be activated to avoid false indications due to capacitively induced voltages or to test RCDs. Furthermore, resistance measurement and continuity test are integrated, to be used only on voltage free conductors. When continuity is detected, the continuity check LED will illuminate and the beeper will sound. PeakTech 1096 has been tested by TÜV / GS for maximum user...

$79.11

PeakTech 8103 - Measurement Equipment Set "Environment"

Measurement Equipment Set "Environment" In education and training, as well as for interested home users, various environmental measurement functions are indispensable. Therefore, this new series of environmental instruments in a sturdy carrying case is a comprehensive collection of practical instruments. The PeakTech 5160 is a compact device for measuring the humidity and air temperature and therefore ideally suited to determine the indoor climate in the house area, or in horticulture and plant breeding to check the air conditions. Whereas the measurement of the light intensity in Lux can be carried out with the new PeakTech 5165, as it is needed in the horticultural field or occupational safety.

$139.99

PeakTech 8100 - Measurement Equipment Set "DMM & Clamp Probes"

Measurement Equipment Set "DMM & Clamp Meter" The PeakTech 3415 Digital Multimeter features a True RMS measurement and is suitable for a variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for live data recording of all measured values to a PC. To complete this measurement device kit the current clamp adapter PeakTech 4200 for the multimeter is integrated, which can measure AC currents up to 200 A. For daily use in the field of electronics, this set also features the alligator clips PeakTech 7015, and the appropriate safety connecting cables PeakTech 7020.

$150.84

PeakTech 8101 - Measurement Equipment Set "Electro"

Measurement Equipment Set "Electro" Designed for daily use in electronics, this case system contains everything needed for installation and maintenance of all electrical equipment. DC and AC voltages, currents up to 80 A or 5A can be ideally measured with the PeakTech 4350 Clamp multimeter in highly accurate resolution of 1 mA, also capacitors, resistors and even temperatures. For quick voltage tests before working on an electrical installation, the PeakTech 1030 provides an easy way of measurement through a noncontact sensor to check if the measured system is live or voltage-free. The two-pole voltmeter PeakTech 1095 has 7 LEDs for the display of voltages between 12 V and 690 V and can also be used as a continuity tester.

$161.69

PeakTech 8104 - Measurement Equipment Set "Temperature & Dew Point"

Measurement Equipment Set "Temperature & Dew Point" In the research area, heating and air conditioning field and assessment of houses in the building and real estate area, a quick and accurate evaluation of humidity, dew point and surface temperature is indispensable. The new PeakTech 5400 Infrared Thermometer with Dew Point measurement and good/bad review with color LEDs is a practical device for everyday use and can detect, in an uncomplicated way, at which points condensation can accumulate, which supports the formation of mold. At the same time a surface temperature can be measured quickly and accurately with the infrared temperature measurement.

$183.40

PeakTech 3435 - Electric Cables Detector (Receiver + Transmitter)

Electrical Cables Detector This new cable detector consisting of a transmitter and a receiver is suitable for the search of non-energized and live wires, as well as line breaks and line tracking of surface and flush mounted conductors, pipe systems and even conductors underground. Also power circuits can be localized in distribution panels and electric cabinets. By the adjustable channels up to 7 transmitters can be used simultaneously, which are displayed correctly with the receiver through the assigned channel number. The high sensitivity of the receiver allows the tracing of conductors from up to 2 meters distance. Well suited for complex electrical systems, pipe installations of heating systems for testing new installations and evaluate older systems in reconstruction works.

$205.10

PeakTech 8102 - Measurement Equipment Set "Service"

Measurement Equipment Set "Service" For daily use in the service area designed, this case system contains everything needed for installation and maintenance of all electrical installations and other systems in the industrial and crafts area. The PeakTech 2025 Digital Multimeter is suited for a high variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for data recording of all measured values to the PC. The PeakTech 4945 IR-Thermometer enables rapid, simple and accurate measurement of surface temperatures, with laser pointer for noncontact, fast temperature measurement of hot or moving objects or difficult measuring points from a safe distance.

$291.92

PeakTech 5605 - IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card

IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card This IR camera has an unbeatable performance / price ratio and is particularly suitable for industry, construction, mechanical, thermo-hydraulic, electrical systems, and wherever it is useful to make small temperature differences visible. This IR camera also contains a built-in video camera in the visible spectrum that allows you to simultaneously obtain infrared and visible images, the overlap of which allows problems to be easily identified. IR and visible images can be saved, with time and date, on the supplied SD card for later processing on a PC. In addition, this unit offers five different color palettes for thermal imaging, five blend modes for photo to thermal imaging and a graphical menu navigation.

$346.72

Showing 1-20 of 24 item(s)