Cart (empty) 0

Best sellers

All best sellers

Home

Active filters:

  • Categories: Insulation Meters
  • Categories: Cables-Voltage-Phase Testers
  • Weight: 0.8kg - 1.4kg

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...
$45.47

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.
$48.72

PeakTech 2675 - Analog Insulation Tester 250/500/1000 V DC400 MΩ

Moving Coil Meter Analogue Insulation Tester @ 250/500/1000 V DC, 400 MΩ Every electrical apparatus and installation need to be safe for the user and for the equipment itself. Electrical conductors of electricity need to be insulated from each other, so that they do not create electrical hazard. Badly insulated circuits can create leakage current which can be dangerous and trip your GFCI, RCCB or ELCB. Each country regulates those levels at which the insulation is acceptable. Check the continuity of wires, complete circuits connections, closure of contacts, circuit breakers, fuses, bounding resistance of connections, etc. are all very important.
$215.41

PeakTech 4395 - Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequencymeter

Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequency Meter Multifunction meter with integrated protection frame combined an automatic digital multimeter and insulation tester, ideal and essential for electrical installation. The 3 ¾ digits, 23mm LCD display (max. 3999) with function symbols, backlight guarantee easy and exact data aquisation. Measurements of DC V, AC V, DC A, AC A, Ohm, Frequancy, diode, continuity test and insulation measurements according to VDE 0413 part 1 are the most useful features.
$281.61