Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 6 products.

Sort by:

PeakTech 1660 - 3-Phase Power Clamp Meter AC, 4 digits 11mm, 40-1000A 750kW 55mm, True RMS, USB

3-Phase Power Clamp Meter AC, 4 digits 11mm, Bargraph, 40-1000A 750kW 55mm, True RMS, Non Contact Voltage Detector, USB, Frequency Meter Power clamp meter for measurements of power consumption, as well as the energy consumption in single-phase or three-phase systems. In addition to other measurement functions, i.e. AC voltage and current, phase angle or power factor, during a voltage measurement this power clamp meter is capable to determine the actual absorbed power. The rugged, rubberized and ergonomically shaped case ensures a safe handling during the measurement and is also suitable for use in industrial applications.

$162.67

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52

PeakTech 4395 - Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequencymeter

Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequency Meter Multifunction meter with integrated protection frame combined an automatic digital multimeter and insulation tester, ideal and essential for electrical installation. The 3 ¾ digits, 23mm LCD display (max. 3999) with function symbols, backlight guarantee easy and exact data aquisation. Measurements of DC V, AC V, DC A, AC A, Ohm, Frequancy, diode, continuity test and insulation measurements according to VDE 0413 part 1 are the most useful features.

$281.61

PeakTech 4090 - Digital Bench Multimeter, 4 ½ digits (22000) 21mm, TRMS, Frequency Meter, USB

Digital Bench Multimeter, 4 ½ digits (22000) 21mm, TRMS, Frequency Meter, USB This high-precision digital bench type multimeter offers highly accurate measurements and has a large 4 ½ digit LCD display with backlight. It can be used both in the laboratory in network operation, and in the mobile service in battery mode. In this way, the device offers a variety of applications. The useful additional features such as True RMS measurement (True RMS), relative value measurement, MIN/MAX and DATA hold function round off the versatility of this device. With the optical USB interface and computer software the unit can display, draw record all test processes on a computer, the graphic software has an exclusive dynamic scale, which can describe very small changes of electric parameters.

$325.01

PeakTech 2755 - Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100

Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100 This innovative combined meter for testing electrical installations has technical performance in the high-end range. With the large 3.5 "TFT color display all important safety checks as the RCD, Voltage, Loop, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer. Since this new development was designed only according to the latest standards, the required measuring values can be even more conveniently stored with an App (iOS/Android) via Bluetooth on the mobile phone, saved to SD card or, when work is completed, from the internal data memory via USB connection to PC.

$868.04