Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 8 products.

Sort by:

PeakTech 3432 - Multi-Function Fuse Locator, with NCV Detector and RCD Tester

Multi-Function Fuse Locator, with NCV (Non Contact Voltage) Detector and RCD (Residual Current Device) Tester The PeakTech 3432 is a multi-function measuring device which locates fuses in a circuit, detects the presence of voltage, tests RCD devices. It consists of a combination of a transmitter and a receiver. Both are used to locate the fuses, the receiver alone is used to detect voltages and the transmitter alone, plugged into an outlet, is used to test the RCDs. This combination of functions of the PeakTech 3432 simplifies a lot the work of an experienced electrician as well as of a novice user.

$54.15

PeakTech 5002 - Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.

Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max. An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed. Output of automatic test voltage from 0 to 300V 3 digit LED display of the output voltage Test of individual LEDs or LED panels Test of Zener Diodes Test the withstand voltage of Electrolytic Capacitors Robust plastic housing Safety: EN 61010-1 Accessories: Carrying case, Test Leads, Power Cable, Operation Manual

$60.66

PeakTech 2175 - LCR Meter, 4 ½ digits, 100 Hz - 1 kHz

LCR Meter, 4 ½ digits, 100 Hz - 1 kHz This digital LCR meter is our newest development and features a large 4 ½ digit LCD display (max 11000), which provides a fast and accurate reading of measured values. The meter is capable of measuring up to 110 mF, which is very useful when testing capacitors in audio equipment or in the area of amateur radio. Inductance (coils) can be measured up to 20 H and resistors up to 110 MΩ. Additionally, the device includes a diode and continuity test. Through the simple operation and the technical capability of this LCR meter, it is the ideal tool in the service and repairs.

$86.71

PeakTech 2180 - Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer

Digital Multimeter 3 5/6 digits (5999) 27mm, Frequency Meter, LCR Meter, Thermometer This combined handheld digital multimeter and LCR meter can be used universally for the service and maintenance sector, due to its high versatility. Large 3 5/6-digits liquid-crystal display (max. 5999) with an analog bargraph and backlight illumination. In addition to the multimeter functions such as voltage, current and frequency measurement, this machine also has measurement functions for inductance, capacitance and resistance. As additional feature, temperatures can be measured with the enclosed K-type probe. For professional use in the field, this device is IP67 dust, & water proof against short-time immersion, and thus naturally also protected against rain and spray.

$108.41

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52

PeakTech 2170 - LCR-ESR Meter, 4 ½ digits, 100 Hz - 100 kHz, USB

LCR-ESR Meter, 4 ½ digits, 100 Hz - 100 kHz, with USB interface This newly developed digital LCR meter with ESR (equivalent series resistance) is equipped with many functions and is, by its compact design, ideal both for component testing in the workplace, as well as for service and maintenance. The illuminated multifunction display with bargraph and high measurement frequency of up to 100 kHz allows a highly precise work. With the included PC software it is possible to store and evaluate the measured values.

$292.89

PeakTech 2755 - Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100

Electrical Installation Safety Tester with TFT-Color Display, SD-Card, USB, Bluetooth - According to VDE 0100 This innovative combined meter for testing electrical installations has technical performance in the high-end range. With the large 3.5 "TFT color display all important safety checks as the RCD, Voltage, Loop, Low-Ohm, Earth resistance and Insulation tests for annual safety-checks and newly installed systems can safely be carried out by the responsible electrical engineer. Since this new development was designed only according to the latest standards, the required measuring values can be even more conveniently stored with an App (iOS/Android) via Bluetooth on the mobile phone, saved to SD card or, when work is completed, from the internal data memory via USB connection to PC.

$868.04