Home

PeakTech 8101 - Measurement Equipment Set "Electro"

Measurement Equipment Set "Electro" Designed for daily use in electronics, this case system contains everything needed for installation and maintenance of all electrical equipment. DC and AC voltages, currents up to 80 A or 5A can be ideally measured with the PeakTech 4350 Clamp multimeter in highly accurate resolution of 1 mA, also capacitors, resistors and even temperatures. For quick voltage tests before working on an electrical installation, the PeakTech 1030 provides an easy way of measurement through a noncontact sensor to check if the measured system is live or voltage-free. The two-pole voltmeter PeakTech 1095 has 7 LEDs for the display of voltages between 12 V and 690 V and can also be used as a continuity tester.

$161.69

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52

PeakTech 3435 - Electric Cables Detector (Receiver + Transmitter)

Electrical Cables Detector This new cable detector consisting of a transmitter and a receiver is suitable for the search of non-energized and live wires, as well as line breaks and line tracking of surface and flush mounted conductors, pipe systems and even conductors underground. Also power circuits can be localized in distribution panels and electric cabinets. By the adjustable channels up to 7 transmitters can be used simultaneously, which are displayed correctly with the receiver through the assigned channel number. The high sensitivity of the receiver allows the tracing of conductors from up to 2 meters distance. Well suited for complex electrical systems, pipe installations of heating systems for testing new installations and evaluate older systems in reconstruction works.

$205.10

PeakTech 3440 - Auto-Ranging Digital Multimeter 4 4/5 digits (49999) 13mm, TRMS, Frequencymeter, Thermometer K, Bluetooth

PeakTech 3440 - Auto-Ranging Digital Multimeter 4 4/5 digits (49999) 13mm, TFT-LCD Display, TRMS, Frequencymeter, Thermometer K, Bluetooth This innovative graphical multimeter convinces through its modern design and the high variety of measurement functions, as well as the consistent design only to the latest technical achievements. The backlit TFT color display shows the various menus of the graphical user interface, the measurement points of the data logger recording, and the measured values of the multimeter function with its reliable, high precision 4 5/6 digits LCD display. The resulting measurement data can be displayed and saved via Bluetooth by an App (iOS / Android) on your smart phone.

$215.95

PeakTech 4094 - Graphical Bench Multimeter, 4 4/5 digit (54999), TrueRMS, Four-Wire OhmMeter, Datalogger, RS-232

Graphical Bench Multimeter, 4 4/5 digits (54999) 480x320 3.7", TrueRMS, Four-Wire OhmMeter, Capacity Meter, Frequency Meter, Thermometer K and PT100, Datalogger, RS-232 Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 65 readings per second, measures the True RMS Value up to 1 kHz and provides many graphical representations and mathematical functions. It has RS-232 interface, for control via SCPI protocol.

$270.21

PeakTech 4395 - Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequencymeter

Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequency Meter Multifunction meter with integrated protection frame combined an automatic digital multimeter and insulation tester, ideal and essential for electrical installation. The 3 ¾ digits, 23mm LCD display (max. 3999) with function symbols, backlight guarantee easy and exact data aquisation. Measurements of DC V, AC V, DC A, AC A, Ohm, Frequancy, diode, continuity test and insulation measurements according to VDE 0413 part 1 are the most useful features.

$281.61

PeakTech 8102 - Measurement Equipment Set "Service"

Measurement Equipment Set "Service" For daily use in the service area designed, this case system contains everything needed for installation and maintenance of all electrical installations and other systems in the industrial and crafts area. The PeakTech 2025 Digital Multimeter is suited for a high variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for data recording of all measured values to the PC. The PeakTech 4945 IR-Thermometer enables rapid, simple and accurate measurement of surface temperatures, with laser pointer for noncontact, fast temperature measurement of hot or moving objects or difficult measuring points from a safe distance.

$291.92

PeakTech 4090 - Digital Bench Multimeter, 4 ½ digits (22000) 21mm, TRMS, Frequency Meter, USB

Digital Bench Multimeter, 4 ½ digits (22000) 21mm, TRMS, Frequency Meter, USB This high-precision digital bench type multimeter offers highly accurate measurements and has a large 4 ½ digit LCD display with backlight. It can be used both in the laboratory in network operation, and in the mobile service in battery mode. In this way, the device offers a variety of applications. The useful additional features such as True RMS measurement (True RMS), relative value measurement, MIN/MAX and DATA hold function round off the versatility of this device. With the optical USB interface and computer software the unit can display, draw record all test processes on a computer, the graphic software has an exclusive dynamic scale, which can describe very small changes of electric parameters.

$325.01

PeakTech 5605 - IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card

IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card This IR camera has an unbeatable performance / price ratio and is particularly suitable for industry, construction, mechanical, thermo-hydraulic, electrical systems, and wherever it is useful to make small temperature differences visible. This IR camera also contains a built-in video camera in the visible spectrum that allows you to simultaneously obtain infrared and visible images, the overlap of which allows problems to be easily identified. IR and visible images can be saved, with time and date, on the supplied SD card for later processing on a PC. In addition, this unit offers five different color palettes for thermal imaging, five blend modes for photo to thermal imaging and a graphical menu navigation.

$346.72

PeakTech 1220 - 20MHz 1 CH Digital Storage Oscilloscope, Digital Multimeter

20MHz 1 CH Digital Storage Oscilloscope, Digital Multimeter This combination of digital storage oscilloscope with True RMS multimeter making a complete solution for measurement need. The creative design for short cut keys simplify all the operation and the high resolution 3,8 inch color display with TFT-LCD panel help to observe the waveform work, whereas the long time operation li-ion battery guarantee the continuous work. This instrument is ideal equipment for modern measurement world and on-site measurement.

$378.73

PeakTech 5610B - High Performance IR-Thermal Imaging Camera, 220 x 160 pixels, -20 °C to +400 °C

High performance IR camera for thermal imaging, 220 x 160 pixels, -20 ° C to +400 ° C Versatile thermal imaging camera with a resolution of 220x160 thermal pixels, which makes temperature differences easily recognizable. Particularly suitable for detecting thermal bridges, leaks in systems and pipes, for tracing heating pipes in walls and in floors, for finding bad electrical contacts and prevent the risk of fires due to overheating. Five different color palettes for thermography and five modes of overlaying the photo in the visible, allow the user to easily identify thermal anomalies. The analysis software is stored in the internal memory of the device and can be installed at any time on a connected PC.

$519.80

PeakTech 4095 - Digital Graphic Benchtop Multimeter, 4 4/5 digits (59999), TrueRMS, 4-Wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 4 4/5 digits (59999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$541.51

PeakTech 5615 - Thermal Imaging Camera, 160 x 120 pixels, -20°C to 550°C, USB Interface and Software

Thermal Imaging Camera 160x120 pixels -20°C to 550°C with USB and Software The PeakTech 5615 is a thermal imaging camera with a resolution of 160x120 thermal image points and a high-quality sensor, which makes even the smallest temperature differences visible. All thermal images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. can be done on the pallet selection. This new tool is particularly useful for finding thermal bridges in thermography, leaks in installations and piping systems, or for tracing heating pipes in walls and floors. In electrical systems, this thermal imaging camera allows you to quickly identify faulty contacts and therefore promptly prevent a risk of fire due to contact resistance.

$541.51

PeakTech 4075 - Digital Bench Multimeter, 4 5/6 digits (62999) 13 mm, Frequency Meter, Thermometer K, USB, LAN, Bluetooth

Digital Bench Multimeter, 4 5/6 digits (62999) 13 mm, Frequency Meter, Thermometer K, USB, LAN, Bluetooth High precision digital bench type multimeter according to the latest technical standards, equipped with a dual 4 5/6 digits display (max. 63000). Its many features are completed by the true RMS measurement, the temperature and the resistance measurement. The PC control and data acquisition software, integrated data logger function with internal memory, USB Disc or external SD memory card, wireless BluetoothTM connection to your PC, integration into the corporate network via LAN network connection, as well as the data connection via USB provides a wide variety of applications.

$585.46

PeakTech 1206 - Tablet Oscilloscope, 70 MHz, 2 Channels, 1 GS/s with Multimeter 4½ digits (19999), LAN and USB Interfaces

Tablet Oscilloscope, 70 MHz, 2 Channels, 1 GS/s, Multimeter 4½ digits (19999), LAN and USB Interfaces The PeakTech 1206 is a new, innovative oscilloscope, based on the size and design of a standard tablet. Any measurement can be recorded as with a bench oscilloscope. It is a two-channel oscilloscope with a bandwidth of 70 MHz able to carry out various measurements with a sampling rate of up to 1 GS/s. The built-in multimeter makes it possible to significantly expand the area of application of the oscilloscope. Settings can be made quickly and precisely with the 8" touchscreen or with the function keys. PeakTech 1206 is a tablet oscilloscope that can be used in almost all areas of electronic engineering due to its portability and excellent performance.

$617.47

PeakTech 1205 - 20MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter

20MHz 2 Channels Digital Storage Oscilloscope, Digital Multimeter This combination of 2 Channels 20MHz digital storage oscilloscope and True RMS multimeter makes a complete solution for measurement needs. The creative design for short cut keys simplify all the operation and the high resolution 3.8 inch color display with TFT panel (640 x 480 pixels - 65535 colors) help to observe the waveforms, whereas the long time operating lithium-ion battery guarantees the continuous work. This instrument is the ideal equipment for modern on site measurements.

$650.03

PeakTech 1207 - Tablet Oscilloscope, 120 MHz, 2 Channels, 1 GS/s with Multimeter 4½ digits (19999), LAN and USB Interfaces

Tablet Oscilloscope, 120 MHz, 2 Channels, 1 GS/s, Multimeter 4½ digits (19999), LAN and USB Interfaces The PeakTech 1207 is a new, innovative oscilloscope, based on the size and design of a standard tablet. Any measurement can be recorded as with a bench oscilloscope. It is a two-channel oscilloscope with a bandwidth of 120 MHz able to carry out various measurements with a sampling rate of up to 1 GS/s. The built-in multimeter makes it possible to significantly expand the area of application of the oscilloscope. Settings can be made quickly and precisely with the 8" touchscreen or with the function keys. PeakTech 1207 is a tablet oscilloscope that can be used in almost all areas of electronic engineering due to its portability and excellent performance.

$725.99

PeakTech 4096 - Digital Graphic Benchtop Multimeter, 5 ½ digits (199999), TrueRMS, 4-wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 5 ½ digits (199999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$758.55

PeakTech 3450A - Thermal Imager IR 120 x 120 pixels with Multimeter 3 5/6 digit (5999) 15mm, TRMS, Data Logger, Bluetooth 4.0

Thermal Imager IR 120 x 120 pixels with Multimeter 3 5/6 digit (5999) 15mm, TRMS, Capacimeter, Frequencymeter, Thermometer K, Data Logger, Bluetooth 4.0 This new combination of state-of-the-art True RMS graphics multimeter and quick-reponse thermal imaging camera ensures the professional use in all areas of electrical engineering. You can check the heat development by electrical connections and loosening points, control cabinets or wiring of systems and reliably find faulty connections with high contact resistances. Use the extensive multimeter functions to make precise measurements that you can automatically log, save via screenshot or record and process via app for Android or iOS mobile devices.

$759.09