Cart (empty) 0

Best sellers

All best sellers

Home

Active filters:

  • Categories: Digital Clamp Multimeters
  • Categories: Chemical-Physical Characteristics
  • Categories: Teaching Tools
  • Price: $22.00 - $1,242.00

PeakTech 4200 - Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs

Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs This clamp adaptor is a transducer, which allows to measure electrical current AC by connection with a digital multimeter. When measuring current with this clamp adaptor, it is no need to break a circuit or to affect the insulation. This adaptor with a design of finger guard, ensures user operating under condition safe.
$17.25

PeakTech 5315 - pH-Meter 0.00 - 14.00 with Backlight

pH-Meter 0.00 - 14.00 with Backlight The PeakTech 5315 pH-meter has a long and thin measuring probe specially developed for laboratory use, which can be used for flasks, beakers or cylinders. The probe can be easily removed thanks to its screw attachment. The LCD display is backlit and is easily readable. In the upper part there are the On/Off switch and two trimmers for pH 7 and pH 4 calibration. The two necessary buffer solutions for calibration are included.
$34.62

5305A - pH-Meter and Thermometer (2-in-1)

pH-Meter and Thermometer (2-in-1) The PeakTech 5305A is a 2-in-1 pH meter that is operated with one hand and measures the pH and temperature in °C or °F of liquids at the same time. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the sturdy and waterproof housing is the easily replaceable sensor head, which includes the sensor for measurement of PH and temperature.
$36.79

PeakTech 3705 - Digital Capacity Tester, 3 ½ digits, 8/80/800Hz

Digital Capacity Tester, 3 ½ digits, 8/80/800Hz Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.
$40.04

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1)

Meter of pH, Electrical Conductivity (EC) and Temperature (3-in-1) The PeakTech 5306 is a 3-in-1 pH meter that is operated with one hand and measures, at the same time, the pH or the Electric Conductivity (EC) in µS/cm, and the temperature in °C or °F, of liquids. Both measured quantities are displayed on the LCD display with permanent backlight. Attached to the rugged and waterproof housing is the easily replaceable sensor head, which includes the sensor for PH or EC measurement and temperature measurement.
$46.55

PeakTech 8200 - Measurement Accessories Set

Measurement Accessories Set This extensive collection of test accessories for the electronics area provides the best suitable measuring adapter for the desired application for each digital multimeter. In addition, these high quality clips and cables are all manufactured to the latest safety standards and provides a high safety in every application for the user. For the material, a flexible and non-slip plastic was chosen, which can also withstand the hardest kinds of usage.
$47.64

PeakTech 3730 - Multifunction Tester RLC, 3 ½ digits (1999) 21mm

Multifunction Tester RLC, 3 ½ digits (1999) 21mm A new type of combitester in modern design for checking the capacity in the ranges of 2nF to 200µF, inductance of 2mH to 20H and resistance of 200Ω to 20MΩ. The measured values are readable quickly and accurately by the 3 ½ digits 21mm LCD display (max 1999 counts). The instrument measures also the transistor hFE, tests diodes and continuity with buzzer. Capacity can be measured either direct into the special jack or by connecting with the test leads supplied with.
$50.90