Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 7 products.

Sort by:

PeakTech 5200 - Wood and Material Moisture Meter

Wood and Material Moisture Meter Valuable wood and material moisture meter, which is characterized through its ease of use and the universal range of applications. The unit features an LCD display that displays the measured values of moisture and ambient temperature. In addition, it is equipped with an LED display, which allows rapid pass-fail evaluation of the measured values. Freshly cut wood has a moisture content of about 50% and after a year it is still at about 30-35%. When burning in fire stove of wood with a high moisture content, the efficiency of the fire stove decreases and simultaneously increases the emission of pollutants, such as soot and fine dust. In addition, it comes to the recognition of shining soot in the chimney, which can cause a chimney fire.

$21.60

PeakTech 5315 - pH-Meter 0.00 - 14.00 with Backlight

pH-Meter 0.00 - 14.00 with Backlight The PeakTech 5315 pH-meter has a long and thin measuring probe specially developed for laboratory use, which can be used for flasks, beakers or cylinders. The probe can be easily removed thanks to its screw attachment. The LCD display is backlit and is easily readable. In the upper part there are the On/Off switch and two trimmers for pH 7 and pH 4 calibration. The two necessary buffer solutions for calibration are included.

$34.62

PeakTech 5090 - IR Temperature and Humidity Meter -50 to +500 °C

IR Temperature / Humidity Meter -50 to +500 °C Combined temperature and humidity meter with double function LCD display for showing RH and temperature at the same time, suitable for use in refregerator, airconditioning and general heat treatment processes employed by metal processing, electric power plants and chemical industry. With built in laser pointer for non-contact infrared temperature measurements of hot or moving objects from a safe distance or of difficult measuring points.

$95.39

PeakTech 5201 - Material Moisture Meter

Material Moisture Meter This new instrument is used for non-destructively tracing dampness in building material of all kinds as well for detecting damp distribution in walls, ceilings and floors. The absolute humidity, as well as the minimum and maximum measured moisture are here shown in the large, illuminated digital display. To measure also at difficult to reach positions, this device allows to hold the current measured value in the display by pressing the hold button. Besides the measured values, the device shows a settable message "Dry, Wet or Risk" and also makes an audible warning tone for high humidity values.

$97.56

PeakTech 8010 - Sound level Calibrator 94, 114 dB

Sound level Calibrator 94, 114 dB For sound level measurements in extreme conditions, at high altitudes or high demands on the accuracy of the measurement results, sound level meters should be checked prior to the measurement with a sound level calibrator. Also for calibration and verification of microphones in audio technology, you need a sound level calibrator, which is designed to produce several sound pressure levels at a fixed frequency characteristic. This calibrator has two switchable calibration steps. The level “94dB”, which corresponds to a sound pressure of 1 Pascal, and the step “114dB”, which corresponds to a sound pressure of 10 Pascal.

$139.99

PeakTech 5125 - Pure Water Tester

Pure Water Tester To measure the conductivity value (ranging from 0 - 2000 µS) which can therefore judge whether water is pure or not. The conductivity value will become lower if there is much less impurities existed in water (for example, distilled water that its purity is higher than others will get a lower conductivity value of approx. < 10 µS). In industrial sectors, it would be a great help for the quality of the products if using the good water (more pure water) in the process. It may cause several diseases if home drink water existing high conductivity & contain impurities, the (pure water tester) are designed to check the purity of water (water conductivity) also can determine the conduction of the “water filter” easily and rapidly.

$140.53

PeakTech 5500 - Frying Oil Tester

Oil-Tester This device has been developed for the fast and reliable testing of frying oils in the catering industry, large kitchens, but also the private user. Also this unit displays the oil temperature, so that the appliance settings and indicators of the fryer can be checked. By measuring the TPM value (total polar material), the content of polar substances can be determined, which characterizes a reliable parameter for the extent of the aging of the frying oil / fat during frying.

$248.51