Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 21 products.

Sort by:

PeakTech 1032 - Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight

Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

$23.77

PeakTech 5025 - Digital Lux Meter 3 ½ digit 200 - 50000 Lux

Digital Lux Meter, 3 ½ digits, 200 - 50000 Lux A very low cost and easy to be used unit, pocket sized with 3 ½ digit 11 mm LCD-display and low battery indication. Ideal for checking and measurement the light intensity in offices, factories, hotels etc. Measuring spectrum according C.I.E.

$29.19

PeakTech 1020A - Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight

Digital Multimeter, 3 ½ digits (1999) 12mm, Non-contact Voltage Detection, Automatic Fuse, LED-Flashlight An easy to use and safe Multimeter with integrated protection frames, pocket sized for AC/DC voltage, current and resistance measurements, and non-contact voltage detection, with built-in flashlight. This devices uses an self-resetting PTC fuse for it's mA measurement range.

$31.36

PeakTech 5165 - Digital-Lux-Meter 3 ½ digits, 200,000 Lux

Digital-Lux-Meter 3 ½ digits, 200,000 Lux This newly developed light meter measures the current illuminance at its fixed sensor with a high sampling rate for a fast and accurate evaluation of the measurement results. The easy to read LCD display is equipped with an automatic backlight, which activates itself in low brightness areas by a photodiode. In addition to the precise measurement function, this device also offers a minimum and maximum value function, and a data hold function at the push of a button. By the handy and robust design, this instrument is especially suitable for use in the field of occupational safety, as well as the evaluation of lighting systems in agriculture and the industrial sector or in offices.

$35.70

PeakTech 1095 - Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper

Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper TÜV/GS-approved 2-pole voltage tester with LED-display for DC and AC measurement from 12 V to 690 V provides further a wide range of measurement functions. The highlights are the measuring point illumination, continuity test with visual and audible signal and the phase and direction indicator.

$42.21

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...

$45.47

PeakTech 2525 - 3-Phase Rotation Tester with LED-display

3-Phase Rotation Tester with LED-Display Determines rotary field direction, non-contact rotary field indication and determines the motor connection. Compact and handheld combitester designed according to safety standard CAT III 300 V. In modern style, essential, ideal for use in power installation. Allows contactless determination of the turning direction of unconnected motors or motors in the off status as well as of rotating fields. Electronic 3-phase measurements and test of phase breakdowns.

$48.72

PeakTech 2530 - 3-Phase Rotation Tester with LCD-display

3-Phase Rotation Tester with LCD-display New handheld tester designed according to safety standard CAT III 600 V in modern, compact style, for checking phase sequence and rotation. LCD-Displays provided on the unit will show wether the phase is open or which phase in open at a glance.

$48.72

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

$48.72

PeakTech 1090 - AC/DC Voltage Tester with RCD Test and LCD Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and LCD Display 3 ½ digits TÜV/GS-approved 2-pole voltage tester with backlight LCD 3½ digits display and bargraph for AC and DC measurement from 6 V to 400 V AC, 690 V DC. It offers also the possibility of continuity test with visual and audible signal, phase and direction indicator, and the testing of residual current devices (RCD).

$71.51

PeakTech 3435 TR - Transmitter for Electric Cables Detector PeakTech 3435

Transmitter for Electric Cables Detector PeakTech 3435 Additional transmitter to be used in conjunction with the cables detector PeakTech 3435 to allow simultaneous tracking of multiple conductors.

$75.85

PeakTech 1096 - AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits PeakTech 1096 is a new instrument for measuring voltages accurately and quickly at the same time thanks to a 3 ½ digit backlit LCD display and a coarse LED indication of the usual voltage range. A single phase test and a direction of rotation display for 3-phase systems are already integrated in this model. The low impedance measurement function can be activated to avoid false indications due to capacitively induced voltages or to test RCDs. Furthermore, resistance measurement and continuity test are integrated, to be used only on voltage free conductors. When continuity is detected, the continuity check LED will illuminate and the beeper will sound. PeakTech 1096 has been tested by TÜV / GS for maximum user...

$79.11

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.

$80.20

PeakTech 5035 - 4 in 1 Multifunction Environment Tester

4 in 1 Multifunction environment tester This meter has been designed to combine the functions of Sound Level, Light Meter, Humidity Meter and Temperature Meter. It is an ideal Multi-Function Environment Meter Instrument with scores of practical applications for professional and home use. The Sound Level functions can be used to measure noise in factories, schools, offices, airports, home, etc. checking acoustics of studios, audiotoriums and hi-fi installations. The Light functions is used to measure illuminance in the field. It is fully cosine corrected for the angular incidence of light. The light sensitive component used in the meter is a very stable, long life silicon diode. The Humidity / Temperature use a humidity / semiconductor sensor and K type thermocouple.

$107.98

PeakTech 5086 - Digital Lux Meter 3 ¾ digit 40 - 400000 Lux

Digital Lux Meter, 3 ¾ digits, 40 - 400000 Lux This new LED LUX meter with 3 ¾ digit LCD display (max. 3999) is a high-tech instrument that is suitable for the measurement of the illuminance of LED lights, fluorescent or conventional incandescent lamps with different light colors. The measurement is performed in lux (lx) or footcandles (fc) or candela (cd). Simple Luxmeters are usually only suitable for the measurement of standard lights of incandescent lamps with a color temperature of 2856 K and show inaccurate measurement results for different color temperatures. In the other hand, the PeakTech 5086 can be adjusted to various light source factors to measure for example various fluorescent lamps, tungsten lamps, red, blue, yellow or day white light LEDs.

$107.98

PeakTech 8103 - Measurement Equipment Set "Environment"

Measurement Equipment Set "Environment" In education and training, as well as for interested home users, various environmental measurement functions are indispensable. Therefore, this new series of environmental instruments in a sturdy carrying case is a comprehensive collection of practical instruments. The PeakTech 5160 is a compact device for measuring the humidity and air temperature and therefore ideally suited to determine the indoor climate in the house area, or in horticulture and plant breeding to check the air conditions. Whereas the measurement of the light intensity in Lux can be carried out with the new PeakTech 5165, as it is needed in the horticultural field or occupational safety.

$139.99

PeakTech 3435 - Electric Cables Detector (Receiver + Transmitter)

Electrical Cables Detector This new cable detector consisting of a transmitter and a receiver is suitable for the search of non-energized and live wires, as well as line breaks and line tracking of surface and flush mounted conductors, pipe systems and even conductors underground. Also power circuits can be localized in distribution panels and electric cabinets. By the adjustable channels up to 7 transmitters can be used simultaneously, which are displayed correctly with the receiver through the assigned channel number. The high sensitivity of the receiver allows the tracing of conductors from up to 2 meters distance. Well suited for complex electrical systems, pipe installations of heating systems for testing new installations and evaluate older systems in reconstruction works.

$205.10

PeakTech 5605 - IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card

IR-Thermal Imaging Camera 60 x 60 pixels, with Micro-SD Card This IR camera has an unbeatable performance / price ratio and is particularly suitable for industry, construction, mechanical, thermo-hydraulic, electrical systems, and wherever it is useful to make small temperature differences visible. This IR camera also contains a built-in video camera in the visible spectrum that allows you to simultaneously obtain infrared and visible images, the overlap of which allows problems to be easily identified. IR and visible images can be saved, with time and date, on the supplied SD card for later processing on a PC. In addition, this unit offers five different color palettes for thermal imaging, five blend modes for photo to thermal imaging and a graphical menu navigation.

$346.72

PeakTech 5610B - High Performance IR-Thermal Imaging Camera, 220 x 160 pixels, -20 °C to +400 °C

High performance IR camera for thermal imaging, 220 x 160 pixels, -20 ° C to +400 ° C Versatile thermal imaging camera with a resolution of 220x160 thermal pixels, which makes temperature differences easily recognizable. Particularly suitable for detecting thermal bridges, leaks in systems and pipes, for tracing heating pipes in walls and in floors, for finding bad electrical contacts and prevent the risk of fires due to overheating. Five different color palettes for thermography and five modes of overlaying the photo in the visible, allow the user to easily identify thermal anomalies. The analysis software is stored in the internal memory of the device and can be installed at any time on a connected PC.

$519.80

PeakTech 5615 - Thermal Imaging Camera, 160 x 120 pixels, -20°C to 550°C, USB Interface and Software

Thermal Imaging Camera 160x120 pixels -20°C to 550°C with USB and Software The PeakTech 5615 is a thermal imaging camera with a resolution of 160x120 thermal image points and a high-quality sensor, which makes even the smallest temperature differences visible. All thermal images can be opened and evaluated using the enclosed software, with subsequent changes, e.g. can be done on the pallet selection. This new tool is particularly useful for finding thermal bridges in thermography, leaks in installations and piping systems, or for tracing heating pipes in walls and floors. In electrical systems, this thermal imaging camera allows you to quickly identify faulty contacts and therefore promptly prevent a risk of fire due to contact resistance.

$541.51

Showing 1-20 of 21 item(s)