Cart (empty) 0

Best sellers

All best sellers

Home

Active filters:

  • Categories: Cables, Probes, Bags
  • Categories: Cables-Voltage-Phase Testers
  • Categories: Teaching Tools
  • Weight: 0.5kg - 1kg

PeakTech 3705 - Digital Capacity Tester, 3 ½ digits, 8/80/800Hz

Digital Capacity Tester, 3 ½ digits, 8/80/800Hz Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.
$40.04

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...
$45.47

PeakTech 2525 - 3-Phase Rotation Tester with LED-display

3-Phase Rotation Tester with LED-Display Determines rotary field direction, non-contact rotary field indication and determines the motor connection. Compact and handheld combitester designed according to safety standard CAT III 300 V. In modern style, essential, ideal for use in power installation. Allows contactless determination of the turning direction of unconnected motors or motors in the off status as well as of rotating fields. Electronic 3-phase measurements and test of phase breakdowns.
$48.72

PeakTech 2530 - 3-Phase Rotation Tester with LCD-display

3-Phase Rotation Tester with LCD-display New handheld tester designed according to safety standard CAT III 600 V in modern, compact style, for checking phase sequence and rotation. LCD-Displays provided on the unit will show wether the phase is open or which phase in open at a glance.
$48.72

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.
$48.72

PeakTech 3730 - Multifunction Tester RLC, 3 ½ digits (1999) 21mm

Multifunction Tester RLC, 3 ½ digits (1999) 21mm A new type of combitester in modern design for checking the capacity in the ranges of 2nF to 200µF, inductance of 2mH to 20H and resistance of 200Ω to 20MΩ. The measured values are readable quickly and accurately by the 3 ½ digits 21mm LCD display (max 1999 counts). The instrument measures also the transistor hFE, tests diodes and continuity with buzzer. Capacity can be measured either direct into the special jack or by connecting with the test leads supplied with.
$50.90

PeakTech 3201 - Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A

Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A Ranges of voltages in DC from 0.1 V to 500 V. Ranges of voltages in AC from 10 V to 500 V. Ranges of currents in DC from 50 μA to 10 A. Ranges of resistances at center of scale from 20 Ω to 2 MΩ. This analog Multimeter has a wide range of measurement functions, including AC and DC voltages, DC-current, a resistance measurement with continuity tester and a dB measurement.
$59.58