Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 25 products.

Sort by:

PeakTech 1095 - Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper

Voltage Tester from 12 to 690 V DC/AC with LED's and Beeper TÜV/GS-approved 2-pole voltage tester with LED-display for DC and AC measurement from 12 V to 690 V provides further a wide range of measurement functions. The highlights are the measuring point illumination, continuity test with visual and audible signal and the phase and direction indicator.

$42.21

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...

$45.47

PeakTech 8200 - Measurement Accessories Set

Measurement Accessories Set This extensive collection of test accessories for the electronics area provides the best suitable measuring adapter for the desired application for each digital multimeter. In addition, these high quality clips and cables are all manufactured to the latest safety standards and provides a high safety in every application for the user. For the material, a flexible and non-slip plastic was chosen, which can also withstand the hardest kinds of usage.

$47.64

PeakTech 2525 - 3-Phase Rotation Tester with LED-display

3-Phase Rotation Tester with LED-Display Determines rotary field direction, non-contact rotary field indication and determines the motor connection. Compact and handheld combitester designed according to safety standard CAT III 300 V. In modern style, essential, ideal for use in power installation. Allows contactless determination of the turning direction of unconnected motors or motors in the off status as well as of rotating fields. Electronic 3-phase measurements and test of phase breakdowns.

$48.72

PeakTech 2530 - 3-Phase Rotation Tester with LCD-display

3-Phase Rotation Tester with LCD-display New handheld tester designed according to safety standard CAT III 600 V in modern, compact style, for checking phase sequence and rotation. LCD-Displays provided on the unit will show wether the phase is open or which phase in open at a glance.

$48.72

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.

$48.72

PeakTech 3432 - Multi-Function Fuse Locator, with NCV Detector and RCD Tester

Multi-Function Fuse Locator, with NCV (Non Contact Voltage) Detector and RCD (Residual Current Device) Tester The PeakTech 3432 is a multi-function measuring device which locates fuses in a circuit, detects the presence of voltage, tests RCD devices. It consists of a combination of a transmitter and a receiver. Both are used to locate the fuses, the receiver alone is used to detect voltages and the transmitter alone, plugged into an outlet, is used to test the RCDs. This combination of functions of the PeakTech 3432 simplifies a lot the work of an experienced electrician as well as of a novice user.

$54.15

PeakTech 8201 - Measurement Accessories Set

Measurement Accessories Set This accessory set was specially put together for the training and laboratory area and includes a practical collection of 4 mm cables with banana plugs, test probes and connection terminals which are ideal for connecting electronic loads and laboratory power supplies. The double-insulated plastic parts are made of flexible and durable material.

$54.15

PeakTech 4250 - Clamp Adaptor DC/AC for Multimeter, 60 A, 9 mm, with 4 mm Plugs

Clamp Adaptor DC/AC for Multimeter, 60 A, 9 mm, with 4 mm Plugs A Transducer which will allows your multimeter to measure electrical current up to 60 A AC or DC, with a frequency response up to 20 kHz. The extended measurement jaws allow performing measurements in a narrow space. When measuring DC current, a simple operating push button is designed for zero adjustment. The clamp adapter is applicable to leakage detection or monitoring. For conductor diameter up to 9 mm.

$57.41

PeakTech 4300 - Clamp Adaptor DC/AC for Multimeter, 1000 A, 57 mm, with 4 mm Plugs

Clamp Adaptor DC/AC for Multimeter, 1000 A, 57 mm, with 4 mm Plugs A transducer which, in connection with a multimeter, allows measurements up to 1000 A DC/AC with frequency up to 400 Hz. Current measurements using a clamp transducer do not cause circuit interruptions. The transducer clamp is equipped with a hand edge protection, which ensures safe work. Measurements can be performed on cables with a diameter up to 57 mm or on bars up to 70 mm x 18 mm. The output voltage is 1 mV / A (1000:1) with the multimeter's input impedance & gt; 1 MΩ.

$71.51

PeakTech 1090 - AC/DC Voltage Tester with RCD Test and LCD Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and LCD Display 3 ½ digits TÜV/GS-approved 2-pole voltage tester with backlight LCD 3½ digits display and bargraph for AC and DC measurement from 6 V to 400 V AC, 690 V DC. It offers also the possibility of continuity test with visual and audible signal, phase and direction indicator, and the testing of residual current devices (RCD).

$71.51

PeakTech 3435 TR - Transmitter for Electric Cables Detector PeakTech 3435

Transmitter for Electric Cables Detector PeakTech 3435 Additional transmitter to be used in conjunction with the cables detector PeakTech 3435 to allow simultaneous tracking of multiple conductors.

$75.85

PeakTech 4205 - Flexible Current Clamp Adapter for Multimeter, 30-300-3000 A AC, 160 mm, with 4 mm Plug

Flexible Current Clamp Adapter for Multimeter, 30-300-3000 A AC, 160 mm, with 4 mm Plug This innovative current clamp, due to its flexible nature, can be coupled to both small diameter and large diameter cables, up to 160 mm. Using the slide switch, the measuring ranges of the current clamp can be set to 30 / 300 / 3000 A AC.

$75.85

PeakTech 1096 - AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits

AC/DC Voltage Tester with RCD Test and Dual Display, 3 ½ digits PeakTech 1096 is a new instrument for measuring voltages accurately and quickly at the same time thanks to a 3 ½ digit backlit LCD display and a coarse LED indication of the usual voltage range. A single phase test and a direction of rotation display for 3-phase systems are already integrated in this model. The low impedance measurement function can be activated to avoid false indications due to capacitively induced voltages or to test RCDs. Furthermore, resistance measurement and continuity test are integrated, to be used only on voltage free conductors. When continuity is detected, the continuity check LED will illuminate and the beeper will sound. PeakTech 1096 has been tested by TÜV / GS for maximum user...

$79.11

PeakTech 4145-5A - Current Clamp Adapter AC, 5A 8mm, with BNC Plug

Current Clamp Adapter AC, 5A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 5A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$108.41

PeakTech 4145-50A - Current Clamp Adapter AC, 50A 8mm, with BNC Plug

Current Clamp Adapter AC, 50A 8mm, with BNC Plug Professional measuring transducer that allows accurate measurements of low currents up to 50A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$118.83

PeakTech 4145-100A - Current Clamp Adapter AC, 100A 13mm, with BNC Plug

Current Clamp Adapter AC, 100A 13mm, with BNC Plug Professional measuring transducer that allows accurate measurements of currents up to 100A AC in conjunction with a measuring device with BNC connection. The extended shape of the measuring tongs and large cable length allow measurements even in narrow spaces. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes.

$129.68

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52

PeakTech 4145-3000A - Current Clamp Adapter AC, 1000A 52mm, with BNC Plug

Current Clamp Adapter AC, 3000A 160mm, with BNC Plug Professional measuring transducer that allows accurate measurements of high currents up to 3000A AC in conjunction with a measuring device with BNC connection. The large opening of the flexible measuring clamp enables measurements on large conductor diameters. This current clamp adapter is ideally suited as an accessory for power meters, power analyzers and oscilloscopes. Suitable as an accessory for the PeakTech 4145 power analyzer For conductor diameters of max. 160 mm Power conversion: 65mV/1000A (65µΩ)

$183.94

Showing 1-20 of 25 item(s)