Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 64 products.

Sort by:

PeakTech 8201 - Measurement Accessories Set

Measurement Accessories Set This accessory set was specially put together for the training and laboratory area and includes a practical collection of 4 mm cables with banana plugs, test probes and connection terminals which are ideal for connecting electronic loads and laboratory power supplies. The double-insulated plastic parts are made of flexible and durable material.

$54.15

PeakTech 8200 - Measurement Accessories Set

Measurement Accessories Set This extensive collection of test accessories for the electronics area provides the best suitable measuring adapter for the desired application for each digital multimeter. In addition, these high quality clips and cables are all manufactured to the latest safety standards and provides a high safety in every application for the user. For the material, a flexible and non-slip plastic was chosen, which can also withstand the hardest kinds of usage.

$47.64

PeakTech 8102 - Measurement Equipment Set "Service"

Measurement Equipment Set "Service" For daily use in the service area designed, this case system contains everything needed for installation and maintenance of all electrical installations and other systems in the industrial and crafts area. The PeakTech 2025 Digital Multimeter is suited for a high variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for data recording of all measured values to the PC. The PeakTech 4945 IR-Thermometer enables rapid, simple and accurate measurement of surface temperatures, with laser pointer for noncontact, fast temperature measurement of hot or moving objects or difficult measuring points from a safe distance.

$291.92

PeakTech 8101 - Measurement Equipment Set "Electro"

Measurement Equipment Set "Electro" Designed for daily use in electronics, this case system contains everything needed for installation and maintenance of all electrical equipment. DC and AC voltages, currents up to 80 A or 5A can be ideally measured with the PeakTech 4350 Clamp multimeter in highly accurate resolution of 1 mA, also capacitors, resistors and even temperatures. For quick voltage tests before working on an electrical installation, the PeakTech 1030 provides an easy way of measurement through a noncontact sensor to check if the measured system is live or voltage-free. The two-pole voltmeter PeakTech 1095 has 7 LEDs for the display of voltages between 12 V and 690 V and can also be used as a continuity tester.

$161.69

PeakTech 8100 - Measurement Equipment Set "DMM & Clamp Probes"

Measurement Equipment Set "DMM & Clamp Meter" The PeakTech 3415 Digital Multimeter features a True RMS measurement and is suitable for a variety of measurements of electronics, such as AC and DC voltage, current, capacity, resistances, frequencies and temperatures. The device also has a USB port for live data recording of all measured values to a PC. To complete this measurement device kit the current clamp adapter PeakTech 4200 for the multimeter is integrated, which can measure AC currents up to 200 A. For daily use in the field of electronics, this set also features the alligator clips PeakTech 7015, and the appropriate safety connecting cables PeakTech 7020.

$150.84

PeakTech 5186 - DC Voltage USB-Datalogger

DC-Voltage USB-Datalogger New handy USB data loggers for measurement of DC voltage. The included software allows to set all required parameters before recording, such as the desired sample rate, the starting function, even after a specific time and date or to set a password for securing the data access. The measurement values recorded can be conclusively evaluated with the PC software, such as displayed as diagrams or saved as an Excel spreadsheet, text or image file.

$65.00

PeakTech 5002 - Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.

Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max. An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed. Output of automatic test voltage from 0 to 300V 3 digit LED display of the output voltage Test of individual LEDs or LED panels Test of Zener Diodes Test the withstand voltage of Electrolytic Capacitors Robust plastic housing Safety: EN 61010-1 Accessories: Carrying case, Test Leads, Power Cable, Operation Manual

$60.66

PeakTech 4395 - Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequencymeter

Digital Multimeter 3 ¾ digits (3999) 23mm, Insulation Tester @250/500/1000V DC, 4GΩ, Frequency Meter Multifunction meter with integrated protection frame combined an automatic digital multimeter and insulation tester, ideal and essential for electrical installation. The 3 ¾ digits, 23mm LCD display (max. 3999) with function symbols, backlight guarantee easy and exact data aquisation. Measurements of DC V, AC V, DC A, AC A, Ohm, Frequancy, diode, continuity test and insulation measurements according to VDE 0413 part 1 are the most useful features.

$281.61

PeakTech 4390 - Digital Multimeter, 3 5/6 digits (5999) 21 mm, Bargraph, TRMS, Frequency Meter, Thermometer K, USB

Digital Multimeter, 3 5/6 digits 21 mm, Bargraph, TRMS, Frequency Meter, Thermometer K , USB Compact Digital Multimeter with 3 5/6 digit multifunction display, 63 segments analogue bargraph and integrated USB interface for easy connection with computer to realize macro recording, monitoring and capture of transient dynamic data. Full input protection, backlight, and easy operating for choosing several measurement functions with the help of the clear view push button section. The True RMS AC voltage and current readings are other most important features of this new constructed multimeter.

$102.98

PeakTech 4300 - Clamp Adaptor DC/AC for Multimeter, 1000 A, 57 mm, with 4 mm Plugs

Clamp Adaptor DC/AC for Multimeter, 1000 A, 57 mm, with 4 mm Plugs A transducer which, in connection with a multimeter, allows measurements up to 1000 A DC/AC with frequency up to 400 Hz. Current measurements using a clamp transducer do not cause circuit interruptions. The transducer clamp is equipped with a hand edge protection, which ensures safe work. Measurements can be performed on cables with a diameter up to 57 mm or on bars up to 70 mm x 18 mm. The output voltage is 1 mV / A (1000:1) with the multimeter's input impedance & gt; 1 MΩ.

$71.51

PeakTech 4250 - Clamp Adaptor DC/AC for Multimeter, 60 A, 9 mm, with 4 mm Plugs

Clamp Adaptor DC/AC for Multimeter, 60 A, 9 mm, with 4 mm Plugs A Transducer which will allows your multimeter to measure electrical current up to 60 A AC or DC, with a frequency response up to 20 kHz. The extended measurement jaws allow performing measurements in a narrow space. When measuring DC current, a simple operating push button is designed for zero adjustment. The clamp adapter is applicable to leakage detection or monitoring. For conductor diameter up to 9 mm.

$57.41

PeakTech 4205 - Flexible Current Clamp Adapter for Multimeter, 30-300-3000 A AC, 160 mm, with 4 mm Plug

Flexible Current Clamp Adapter for Multimeter, 30-300-3000 A AC, 160 mm, with 4 mm Plug This innovative current clamp, due to its flexible nature, can be coupled to both small diameter and large diameter cables, up to 160 mm. Using the slide switch, the measuring ranges of the current clamp can be set to 30 / 300 / 3000 A AC.

$75.85

PeakTech 4200 - Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs

Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs This clamp adaptor is a transducer, which allows to measure electrical current AC by connection with a digital multimeter. When measuring current with this clamp adaptor, it is no need to break a circuit or to affect the insulation. This adaptor with a design of finger guard, ensures user operating under condition safe.

$17.25

PeakTech 4096 - Digital Graphic Benchtop Multimeter, 5 ½ digits (199999), TrueRMS, 4-wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 5 ½ digits (199999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$758.55

PeakTech 4095 - Digital Graphic Benchtop Multimeter, 4 4/5 digits (59999), TrueRMS, 4-Wire Ohm, Datalogger, RS-232, LAN, USB

Digital Graphic Benchtop Multimeter, 4 4/5 digits (59999) 480x320 pixel 10cm, TrueRMS, 4-Wire Ohm, Frequencymeter, Thermocouple or Resistance (RTD) Thermometer, Datalogger, RS-232, LAN, USB Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 150 readings per second, measures the True Effective Value up to 100 kHz and provides many graphical representations and mathematical functions. It has RS-232 interfaces, for control via software or SCPI protocol, LAN and USB.

$541.51

PeakTech 4094 - Graphical Bench Multimeter, 4 4/5 digit (54999), TrueRMS, Four-Wire OhmMeter, Datalogger, RS-232

Graphical Bench Multimeter, 4 4/5 digits (54999) 480x320 3.7", TrueRMS, Four-Wire OhmMeter, Capacity Meter, Frequency Meter, Thermometer K and PT100, Datalogger, RS-232 Precision benchtop multimeter with high resolution TFT graphic display, equipped according to the most advanced technical standards. It has a large number of special functions, such as the simultaneous measurement of two quantities, for example AC Voltage and Frequency. It takes up to 65 readings per second, measures the True RMS Value up to 1 kHz and provides many graphical representations and mathematical functions. It has RS-232 interface, for control via SCPI protocol.

$270.21

PeakTech 4090 - Digital Bench Multimeter, 4 ½ digits (22000) 21mm, TRMS, Frequency Meter, USB

Digital Bench Multimeter, 4 ½ digits (22000) 21mm, TRMS, Frequency Meter, USB This high-precision digital bench type multimeter offers highly accurate measurements and has a large 4 ½ digit LCD display with backlight. It can be used both in the laboratory in network operation, and in the mobile service in battery mode. In this way, the device offers a variety of applications. The useful additional features such as True RMS measurement (True RMS), relative value measurement, MIN/MAX and DATA hold function round off the versatility of this device. With the optical USB interface and computer software the unit can display, draw record all test processes on a computer, the graphic software has an exclusive dynamic scale, which can describe very small changes of electric parameters.

$325.01

PeakTech 4075 - Digital Bench Multimeter, 4 5/6 digits (62999) 13 mm, Frequency Meter, Thermometer K, USB, LAN, Bluetooth

Digital Bench Multimeter, 4 5/6 digits (62999) 13 mm, Frequency Meter, Thermometer K, USB, LAN, Bluetooth High precision digital bench type multimeter according to the latest technical standards, equipped with a dual 4 5/6 digits display (max. 63000). Its many features are completed by the true RMS measurement, the temperature and the resistance measurement. The PC control and data acquisition software, integrated data logger function with internal memory, USB Disc or external SD memory card, wireless BluetoothTM connection to your PC, integration into the corporate network via LAN network connection, as well as the data connection via USB provides a wide variety of applications.

$585.46

PeakTech 3730 - Multifunction Tester RLC, 3 ½ digits (1999) 21mm

Multifunction Tester RLC, 3 ½ digits (1999) 21mm A new type of combitester in modern design for checking the capacity in the ranges of 2nF to 200µF, inductance of 2mH to 20H and resistance of 200Ω to 20MΩ. The measured values are readable quickly and accurately by the 3 ½ digits 21mm LCD display (max 1999 counts). The instrument measures also the transistor hFE, tests diodes and continuity with buzzer. Capacity can be measured either direct into the special jack or by connecting with the test leads supplied with.

$50.90

PeakTech 3690 - Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter

Digital Multimeter, 3 4/5 digits (3999) 15mm, Frequency Meter, Phonometer, Thermometer, Hygrometer, Luxmeter Professional multitester with large LCD, showing 2 lines of readings and supplied with backlight for easy reading. This multitester combines the functions of sound, lux, humidity, temperature measurements, with a digital multimeter. It provides additional protection against damages caused by improper operation.

$80.20

Showing 1-20 of 64 item(s)