Cart (empty) 0

Best sellers

All best sellers

Home

Active filters:

  • Price: $17.00 - $77.00

PeakTech 3349 - Digital Multimeter, 3 5/6 digits (5999) 22mm, TrueRMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector

Digital Multimeter, 3 5/6 digit (5999), True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3349 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.
$45.47

PeakTech 3350 - Digital Multimeter, 3 5/6 digits (5999) 22mm, AutoRange, TrueRMS, Capacimeter, Frequency Meter, Thermometer K

Digital Multimeter, 3 5/6 digit (5999), AutoRange, True RMS, Capacimeter, Frequency Meter, Thermometer K, NCV Detector The PeakTech 3350 offers a variety of useful functions that simplify daily work, especially in dark or noisy environments. The lighting of the large LCD display is automatically activated by a photodiode in dark surroundings. On the back of the device there is also a bright LED flashlight for illuminating the measurement area. A multi-colored LED bar is located above the display. Depending on the active measuring function, it lights up green during the continuity test, red when a voltage is detected in "Non-Contact Voltage Detection" (NCV) mode, yellow when measuring large capacities or flashes red when the phase is detected in "Single-Pole Phase Testing" (LIVE) mode.
$51.98

PeakTech 3365 - LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm

LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm The tester is a newly designed and very practical tester that can easily read the correct pin configuration of cables by comparing one transmitting end to the corresponding receiving end. It is easy to verify the cable continuity, open, short and cross connect.
$59.58

PeakTech 3410 - Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K

Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K Innovative 3 5/6-digits Digital Multimeter with 20mm LCD, function symbols, backlight and max. display 6000. This PeakTech 3410 leaves nothing to be desired. Rotary switch and push button keys for convenient one-hand operation. Automatic range selection and functional excellency make this multimeter ideal for any service and education purpose.
$59.58

PeakTech 3415 - Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K, USB

Digital Multimeter 3 5/6 digits (5999) 20mm, Frequency Meter, Thermometer K, USB Interface Multimeter designed with high safety standard featuring modern style, integrated protection frame. The 3 5/6 digit, 20mm LCD-display (max. 5999) with function symbols and backlight guarantee exact data aquisation. Optical USB standard serial port is equipped with this meter for easy connection with PC to realize macro recording and monitoring, capture of transient dynamic datas. The basic functions can be selected by a rotary switch easily and automatic range selection for DCV, ACV, DCA, ACA, Ohm, diode, continuity, frequency, capacitance and temperature measuring function.
$75.85

PeakTech 3432 - Multi-Function Fuse Locator, with NCV Detector and RCD Tester

Multi-Function Fuse Locator, with NCV (Non Contact Voltage) Detector and RCD (Residual Current Device) Tester The PeakTech 3432 is a multi-function measuring device which locates fuses in a circuit, detects the presence of voltage, tests RCD devices. It consists of a combination of a transmitter and a receiver. Both are used to locate the fuses, the receiver alone is used to detect voltages and the transmitter alone, plugged into an outlet, is used to test the RCDs. This combination of functions of the PeakTech 3432 simplifies a lot the work of an experienced electrician as well as of a novice user.
$54.15

PeakTech 3433 - Scanning Device for Material Detection in a Wall

Scanning Device for Material Detection in a Wall The PeakTech 3433 was specially developed for daily use in the craftsmanship, as it can be used to locate wood, metal or live lines to make sure that no damage is caused through the work of chiseling, slitting or drilling into walls. The inverted LCD display shows the distance to the material which has been found and helps the user to assess the internal condition of the wall to avoid damage to pipes or live circuits. The depth of reception of the sensor is between 20mm (wood) and 120mm (ferrous metal) depending on the material sought. In addition, a LED (green, yellow, red) indicates whether a material has been found or whether there is a live line at the current test point.
$48.72

PeakTech 3434 - Acoustic Wire Detector with Tone Generator

Acoustic Wire Detector with Tone Generator This new cable finder works acoustically and provides a fast and cost-effective solution for finding voltage-free lines in house installations, testing telephone lines and identifying individual cables / wires or performing a continuity test. With the transmitter / sound generator, a carrier signal is modulated to an electrical conductor, which you can track with the receiver / amplifier with built-in speaker or via a headphone jack. You can also control the sensitivity using a rotary knob on the receiver to achieve the best possible identification even with coring wires. When connected to a telephone jack via the RJ-11 connector, the LED of the transmitter indicates the status of the active telephone line between "free", "busy" or...
$45.47

PeakTech 3440 BC - Battery & Charger for PeakTech 3440 Multimeter

Battery & Charger for PeakTech 3440 Multimeter This charger with lithium-polymer battery of the latest generation extends our Peaktech 3440 graphical Multimeter with a power supply for the service, maintenance, and repair work in the field use. Lithium-Polymer batteries combine high life time with a very low selfdischarge and memory effect. This ensures a long service life and storability without discharging of the battery.
$35.70

PeakTech 3705 - Digital Capacity Tester, 3 ½ digits, 8/80/800Hz

Digital Capacity Tester, 3 ½ digits, 8/80/800Hz Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.
$40.04

PeakTech 3730 - Multifunction Tester RLC, 3 ½ digits (1999) 21mm

Multifunction Tester RLC, 3 ½ digits (1999) 21mm A new type of combitester in modern design for checking the capacity in the ranges of 2nF to 200µF, inductance of 2mH to 20H and resistance of 200Ω to 20MΩ. The measured values are readable quickly and accurately by the 3 ½ digits 21mm LCD display (max 1999 counts). The instrument measures also the transistor hFE, tests diodes and continuity with buzzer. Capacity can be measured either direct into the special jack or by connecting with the test leads supplied with.
$50.90

PeakTech 4200 - Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs

Clamp Adaptor AC for Multimeter, 200 A, 16 mm, with 4 mm Plugs This clamp adaptor is a transducer, which allows to measure electrical current AC by connection with a digital multimeter. When measuring current with this clamp adaptor, it is no need to break a circuit or to affect the insulation. This adaptor with a design of finger guard, ensures user operating under condition safe.
$17.25

PeakTech 4250 - Clamp Adaptor DC/AC for Multimeter, 60 A, 9 mm, with 4 mm Plugs

Clamp Adaptor DC/AC for Multimeter, 60 A, 9 mm, with 4 mm Plugs A Transducer which will allows your multimeter to measure electrical current up to 60 A AC or DC, with a frequency response up to 20 kHz. The extended measurement jaws allow performing measurements in a narrow space. When measuring DC current, a simple operating push button is designed for zero adjustment. The clamp adapter is applicable to leakage detection or monitoring. For conductor diameter up to 9 mm.
$57.41

PeakTech 4350 - Clamp Meter DC/AC, 3 ⅘ digits 14mm, 5-80A True RMS 19mm, Leakage Current

Clamp Meter DC/AC, 3 ⅘ digits 14mm, 5-80A 19mm, True RMS, Leakage Current, Frequency Meter, Thermometer This newly developed power clamp meter in the most modern design is suitable for small cable diameters up to 19mm, leakage currents up to 5A in high-precision resolution of 1mA and also currents up to 80A with 100mA resolution. Furthermore, this device is topped by its exact measurement functions for voltage, current, capacitance, resistance and frequency measurements, as well as a temperature measurement with the enclosed K-Type probe. In addition to the measurement features, the device also offers function keys for minimum and maximum value display, a data hold function and a switchable LED flashlight for the measuring area.
$75.85