PeakTech 3365 - LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm
3365
RM262.72
LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm
The tester is a newly designed and very practical tester that can easily read the correct pin configuration of cables by comparing one transmitting end to the corresponding receiving end.
It is easy to verify the cable continuity, open, short and cross connect.
LAN Tester with Digital Multimeter 3 ½ digits (1999) 13mm
The tester is a newly designed and very practical tester that can easily read the correct pin configuration of cables by comparing one transmitting end to the corresponding receiving end.
It is easy to verify the cable continuity, open, short and cross connect.
- Can test the correct pin configuration of 10 Base-T, 10 Base-2 Thin Ethernet cable, RJ45 / RJ11 modular cables 356 A, TIA 568A / 568B and Token Ring cable etc.
- With remote kit it can remotely test cables up to 300m away either on wall plate or patch panel.
- Can test the ground wire
- Measures DC / AC voltage, DC / AC current, Resistance
- Continuity test with buzzer and diode test
- Safety: EN-61010-1; CAT II 1000V
- Accessories: batteries, manual
- Spare fuse: PeakTech 7707 - F 200mA 600V 5x20 mm
| DC V | 200mV / 2 / 20 / 200 / 600V; 0.1mV; ±(0.5% + 3 digits) |
| AC V | 2 / 20 / 200 / 600V; 1mV; ± (1% + 5 digits) |
| DC A | 200µA / 2 / 20 / 200mA; 0.1µA; ± (1.5% + 3 digits) |
| AC A | 200µA / 2 / 20 / 200mA; 0.1µA; ± (1.8% + 8 digits) |
| Resistance | 200Ω / 2 / 20 / 200kΩ / 2 / 20MΩ; 0.1Ω; ± (0.8% + 5 digits) |
| Operation voltage | 9V battery / 2 x 1.5V AAA (UM-4) batteries |
| Dimensions (WxHxD) | 75x162x44mm3 |
| Weight | 310g |
You might also like
