Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 29 products.

Sort by:

PeakTech 9035 - Power Meter

Energy / Power Meter New designed, high-precison Energy Meter for detecting the energy consumption of electrical appliances and to calculate the total cost of the electricity consumption of a device by entering the current price. Through the integrated power factor calculation all modern electronic consumers such as switching power supplies, TVs, fluorescent lights, LED systems and of course, resistive loads such as electrical heaters and hobs are precisely measured. In addition, due to the high resolution and the low response, even very small or standby loads are measured from approximately 1W.

$16.17

PeakTech 7630 - Ceramic Fuse FF, 20A 250V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 20A 250V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$16.17

PeakTech 7736 - Ceramic Fuse F, 10A 300V 5x20mm, 10 Pieces

Ceramic Fuse F, 10A 300V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$16.17

PeakTech 7625 - Ceramic Fuse FF, 12.5A 500V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 12.5A 500V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$16.17

PeakTech 4935 - Mini IR Thermometer -50°C to +400°C - 12:1 Distance / Measurement Area Diameter

Mini IR Thermometer -50°C to +400°C - Distance to Measuring Spot Ratio 12:1 * Not suitable for human body temperature measurement * Handy infrared thermometer with an excellent price-performance ratio that measures surface temperatures quickly, easily and accurately using a built in laser pointer. The laser can be aimed at hot surfaces or moving objects, allowing the operator to easily capture the temperatures to be measured from a safe distance. The thermometer is activated by a trigger and carries out a precise (0.1°C resolution) temperature measurement in a flash. The three function keys next to the screen toggle between °C and °F, activate the laser and the backlight of the display.

$17.91

PeakTech 1070 - Digital Multimeter, 3 ½ digits (1999) 12mm

Digital Multimeter, 3 ½ digits (1999) 12mm, Thermometer TÜV/GS approved pocket size digital multimeter in modern design. Suitable for technicians and hobbyists.

$18.34

PeakTech 5200 - Wood and Material Moisture Meter

Wood and Material Moisture Meter Valuable wood and material moisture meter, which is characterized through its ease of use and the universal range of applications. The unit features an LCD display that displays the measured values of moisture and ambient temperature. In addition, it is equipped with an LED display, which allows rapid pass-fail evaluation of the measured values. Freshly cut wood has a moisture content of about 50% and after a year it is still at about 30-35%. When burning in fire stove of wood with a high moisture content, the efficiency of the fire stove decreases and simultaneously increases the emission of pollutants, such as soot and fine dust. In addition, it comes to the recognition of shining soot in the chimney, which can cause a chimney fire.

$21.60

PeakTech 7707 - Ceramic Fuse F, 200mA 600V 5x20mm, 10 Pieces

Ceramic Fuse F, 200mA 600V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 1032 - Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight

Voltage Detector 12 - 1000 V AC Contactless with Buzzer, Vibration and LED Flashlight Voltage Detector for the contactless detection of AC voltages on live cables and devices. By switching the measuring range, it is possible to detect even low voltages down to a minimum of 12V AC. When the display shows "Working" you can be sure that the detector is working and detects if there is voltage. The voltage detection is indicated by the flashing of the yellow or red LED, by the sound of the buzzer and the vibration of the detector. The voltage detection cannot escape even in noisy environments. The integrated LED flashlight can be switched on at any time, even if the voltage detector is switched off. In addition, the device can be carried comfortably and safely with its pocket clip.

$23.77

PeakTech 7737 - Ceramic Fuse F, 10A 600V 5x20mm, 10 Pieces

Ceramic Fuse F, 10A 600V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7722 - Ceramic Fuse F, 600mA 600V 5x20mm, 10 Pieces

Ceramic Fuse F, 600mA 600V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7721 - Ceramic Fuse F, 500mA 600V 5x20mm, 10 Pieces

Ceramic Fuse F, 500mA 600V 5x20mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7605 - Ceramic Fuse FF, 400mA 1000V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 400mA 1000V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7621 - Ceramic Fuse FF, 10A 600V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 10A 600V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7611 - Ceramic Fuse FF, 600mA 1000V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 600mA 1000V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7606 - Ceramic Fuse FF, 800mA 1000V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 800mA 1000V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7600 - Ceramic Fuse FF, 250mA 1000V 6.3x32mm, 10 Pieces

Ceramic Fuse FF, 250mA 1000V 6.3x32mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech 7515 - Ceramic Fuse FF, 630mA 690V 10.3x38mm, 10 Pieces

Ceramic Fuse FF, 630mA 690V 10.3x38mm 2 , 10 Pieces Modern Safety Fuse with ceramic body provide a much higher level of protection against damage to the measurement devices when triggered than regular glass fuses. Blown fuse may only be replaced with spare fuses of the same type and specifications to ensure the safety of the devices and thus the safety of the user during following measurements.

$23.77

PeakTech TF-10 - Universal Temperature Probe -50 +650 °C

Universal Temperature Probe -50 +650 °C Universal temperature probe suitable for liquids, surface and air measurements. This temperature probes are K-thermocouples (NiCrNi). This probes are suitable for all of our thermometers published in our catalogue.

$23.77

PeakTech TF-25 - Clamp Temperature Probe, -20°C … + 200°C

Clamp Temperature Probe, -20°C … + 200°C For flow and return temperature measurements in heating and air conditioning, as well as many other temperature measurements this kind of temperature sensors are needed, which can be connected with stable clamping pliers directly to the system to be measured. For this, the new clamp temperature probe with its large clamp opening and the strong spring system is well suited. With the practical design with non-slip grips and by the rapid rise time of the temperature sensor, it is an indispensable tool for every service technician and mechanic in the cooling and air conditioning sector, as well as in the installation and maintenance of heating systems.

$24.85

Showing 1-20 of 29 item(s)