Cart (empty) 0

Best sellers

All best sellers

Home

Active filters:

  • Categories: Power Supplies
  • Categories: Teaching Tools
  • Price: $22.00 - $1,242.00

PeakTech 3705 - Digital Capacity Tester, 3 ½ digits, 8/80/800Hz

Digital Capacity Tester, 3 ½ digits, 8/80/800Hz Digital capacity meter is a 3 ½ digits with steady operations, fashionable design and highly reliable hand held measuring instrument. The meter can also measure resistance, transistor, diode and continuity with buzzer; has a broad capacitance measurement range, precise accuracy and can be used in to measure the circuit designed capacitance of cables, switch and PCB layout.
$40.04

PeakTech 3730 - Multifunction Tester RLC, 3 ½ digits (1999) 21mm

Multifunction Tester RLC, 3 ½ digits (1999) 21mm A new type of combitester in modern design for checking the capacity in the ranges of 2nF to 200µF, inductance of 2mH to 20H and resistance of 200Ω to 20MΩ. The measured values are readable quickly and accurately by the 3 ½ digits 21mm LCD display (max 1999 counts). The instrument measures also the transistor hFE, tests diodes and continuity with buzzer. Capacity can be measured either direct into the special jack or by connecting with the test leads supplied with.
$50.90

PeakTech 3201 - Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A

Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A Ranges of voltages in DC from 0.1 V to 500 V. Ranges of voltages in AC from 10 V to 500 V. Ranges of currents in DC from 50 μA to 10 A. Ranges of resistances at center of scale from 20 Ω to 2 MΩ. This analog Multimeter has a wide range of measurement functions, including AC and DC voltages, DC-current, a resistance measurement with continuity tester and a dB measurement.
$59.58

PeakTech 5002 - Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.

Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max. An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed. Output of automatic test voltage from 0 to 300V 3 digit LED display of the output voltage Test of individual LEDs or LED panels Test of Zener Diodes Test the withstand voltage of Electrolytic Capacitors Robust plastic housing Safety: EN 61010-1 Accessories: Carrying case, Test Leads, Power Cable, Operation Manual
$60.66