Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 7 products.

Sort by:

PeakTech 3385 - Analogue Multimeter DC/AC, DC 20kΩ/V 3-600V 100µA-500mA/10A

Analogue Multimeter DC/AC, DC 20kΩ/V 3-600V 100µA-500mA/10A Analogue Multimeter with mirror scale, point bearing moving-coil-mechanism and central range selector switch for easy operation. Ideal for quick measurements during servicing.

$35.70

PeakTech 5170 - Digital Vane Anemometer and Thermometer 3 ⅚ digits

Digital Vane Anemometer and Thermometer 3 ⅚ digits This new vane anemometer measures air velocity in meters/ second, kilometers/hour, feet/minute, knots and miles per hour, as well as the current air temperature with simultaneous display of these two measured values on the display. The multi line LCD display is equipped with an automatic back-light illumination, which activates in low brightness areas by a photodiode. In addition to the precise measurement function, this device also provides an average and maximum value detection. By the handy and robust design of this instrument, it is perfectly suitable for heating and air conditioning technicians, as well as for the hobby and recreational area.

$35.70

PeakTech 3201 - Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A

Analog Multimeter DC/AC, DC 20kΩ/V 0.1-500V 50µA-500mA/10A Ranges of voltages in DC from 0.1 V to 500 V. Ranges of voltages in AC from 10 V to 500 V. Ranges of currents in DC from 50 μA to 10 A. Ranges of resistances at center of scale from 20 Ω to 2 MΩ. This analog Multimeter has a wide range of measurement functions, including AC and DC voltages, DC-current, a resistance measurement with continuity tester and a dB measurement.

$59.58

PeakTech 3202 - Analog Voltmeter DC/AC, DC 20kΩ/V 0.1-500V

Analog Voltmeter DC/AC, DC 20kΩ/V 0.1-500V This analog voltmeter provides a clear voltage display in DC and AC voltage range.

$59.58

PeakTech 3203 - Analog Ammeter DC/AC, 5-500mA/10A

Analog Ammeter DC/AC, 5-500mA/10A This analog ammeter provides a clear current display in DC and AC range.

$59.58

PeakTech 3204 - Galvanometer with Central Zero DC, ±100mV ±50µA/5mA

Galvanometer with Central Zero DC, ±100mV ±50µA/5mA This new galvanometer moves the pointer relative to the direct current between the positive and negative side of the scale and thus can show the current flow.

$59.58

PeakTech 5002 - Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max.

Tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors - 0-300 V DC with Soft-Start, 25 mA max. An extremely practical component tester for LEDs, Backlights, Zener Diodes, Electrolytic Capacitors and other components. The device outputs an automatically raised output voltage between 0 to 300 V DC, which adapts to the connected load not supering the current of 25 mA, so that the sensitive components are not destroyed. Output of automatic test voltage from 0 to 300V 3 digit LED display of the output voltage Test of individual LEDs or LED panels Test of Zener Diodes Test the withstand voltage of Electrolytic Capacitors Robust plastic housing Safety: EN 61010-1 Accessories: Carrying case, Test Leads, Power Cable, Operation Manual

$60.66