Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 5 products.

Sort by:

PeakTech 2680A/85A KS - Test Lead set with HV Probe and two Leads (Black/Green) for PeakTech 2680/2685 Insulation Testers

Test Lead set with HV Probe and two Leads (Black/Green) for PeakTech 2680/2685 Insulation Testers A set consisting of a high-voltage probe head up to 10 kV and other accessories suitable for HV insulation measuring devices PeakTech 2680A and 2685A.

$110.62

Out-of-Stock

Out of stock

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52

PeakTech 2695 - Insulation Tester @ 125/250/500/1000 V DC, 4 GΩ, 3½ digits

Digital Insulation Tester @ 125/250/500/1000 V DC, 4 GΩ, 3½ digits For measurements of Insulation, DC and AC voltage, Continuity, according to VDE-0413.

$184.37

PeakTech 2680A - High Voltage Insulation Tester 5,000 V DC, 1 TΩ

High Voltage Insulation Tester 5,000 V DC, 1 TΩ PeakTech 2680A is a high voltage insulation meter capable of generating a test voltage up to 5,000 V DC. Check the insulation of electrical lines or equipment and identify faulty ones. The measuring functions can be set quickly using the selector switch and the pushbuttons. Built into a sturdy carrying case which also protects it from splash water and external influences. With the new additional functions PI (Polarization Index) and DAR (Dielectric Absorption Ratio) the possible applications of the PeakTech 2680A are very wide. Due to its many functions the PeakTech 2680A is ideal for everyday use in electrical engineering as it can be used in almost every area in which insulation measurement is required.

$651.00