Home

Digital Clamp Multimeters

Digital Voltmeter Modules

Cables, Probes, Bags

Fuses for Multimeters

Milliohmmeters

LCR Meters and Component Testers

Energy Meters

Insulation Meters

Earth Resistance Meters

Electrical Installation Safety Testers

Cables-Voltage-Phase Testers

Magnetic Field Detectors

Power Line Analyzers

Signal Generators

Digital Oscilloscopes

Environmental Measures

Thermometers and Sensors

IR Thermal Imaging Cameras

Hygrometers

Anemometers and Pressure Gauges

Phonometers

Luxmeters

Chemical-Physical Characteristics

Set of Measuring Instruments

Tripods

Carrying cases

Accessories

There are 8 products.

Sort by:

PeakTech 2700 - Digital Earth Resistance Tester 3 ½ digits

Digital Earth Resistance Tester, 3 ½ digits Electronic Digital Earth Resistance Tester designed for measurement of the resistance of earthing used in the electrical equipment as well as for measurement of ground resistivity. It can be used for measurements of the other low regular, liquid resistances, voltage AC, voltage DC and electrical resistance. This Earth Resistance Tester finds wide application for testing earthing installation in power based industries, telecommunication networks and electrical traction systems, etc.

$151.82

PeakTech 1660 - 3-Phase Power Clamp Meter AC, 4 digits 11mm, 40-1000A 750kW 55mm, True RMS, USB

3-Phase Power Clamp Meter AC, 4 digits 11mm, Bargraph, 40-1000A 750kW 55mm, True RMS, Non Contact Voltage Detector, USB, Frequency Meter Power clamp meter for measurements of power consumption, as well as the energy consumption in single-phase or three-phase systems. In addition to other measurement functions, i.e. AC voltage and current, phase angle or power factor, during a voltage measurement this power clamp meter is capable to determine the actual absorbed power. The rugged, rubberized and ergonomically shaped case ensures a safe handling during the measurement and is also suitable for use in industrial applications.

$162.67

PeakTech 2710 - Digital Residual Current Devices Tester, RCD Types A, AC

Digital Residual Current Devices Tester, RCD Types A, AC Residual current circuit breakers are used for personal protection and switch off a circuit when a fault current is detected, which flows through the protective earthing (PE). This RCD tester determines the tripping current and the tripping time of residual current circuit breakers which are used in every new building according to current building regulations. The various selectable test currents and characteristics of the RCD allow flexible use of this instrument. RCD testers allow a fault current to flow and determine at which fault current the RCD reacts. Furthermore, the trip time is measured. These two parameters tripping current and tripping time are the safety-relevant characteristics of a residual-current-operated...

$162.67

PeakTech 2715 - Loop/PSC Digital Tester

Loop/PSC Digital Tester PeakTech 2715 Loop/PSC Digital Tester takes two measurements: "LOOP" and "PSC". The "LOOP" function measures the impedance of the circuit between the phase and the earth conductors. If there is a RCD in the circuit, the "LOOP" function can trip it. To limit the test current to 15 mA and prevent the RCD from tripping, use the 2,000 Ω range. A low earth impedance ensures a small contact voltage Uc in the event of a fault. The "PSC" function measures the prospective short-circuit current (PSC) between the phase and the neutral conductors in the event of a short between the two. Knowledge of the PSC allows you to choose the circuit breaker so that it has a breaking capacity higher than the PSC.

$173.52

PeakTech 6230 - Switching Power Supply with Lighter Socket, DC 13.8V 33A

Switching Power Supply with Lighter Socket, DC 13.8V 33A Switching power supply designed for radio equipment, immune to radio frequency interference at close range. The overload protection, over temperature protection, short circuit protection and over voltage protection, ensure better reliability and safer protection to both the power supply and the connected load.

$179.06

PeakTech 5220 - Coating Thickness Meter

Coating Thickness Meter Coating thickness meters are used for non-destructive measurement of coatings such as varnish, paint or plastic of metallic surfaces. The new PeakTech 5220 operates according to the Eddy current principle and is suitable for ferrous metals (Fe), such as sheet steel and non-ferrous metals (Non-Fe), such as aluminum or copper. This instrument works with high precision and has a German and English user interface with menu control on the well readable matrix LCD display with backlight. In addition to the high variety of measurement functions, such as minimum and maximum values, mean, high and low alarm and much more, this model also has an internal data memory with four measurement groups.

$179.60

PeakTech 2695 - Insulation Tester @ 125/250/500/1000 V DC, 4 GΩ, 3½ digits

Digital Insulation Tester @ 125/250/500/1000 V DC, 4 GΩ, 3½ digits For measurements of Insulation, DC and AC voltage, Continuity, according to VDE-0413.

$184.37

PeakTech 4960 - IR Thermometer -50 +1200 °C 4 digits, USB

Infrared Thermometer -50 to +1200 °C, Dual Laser, K type thermocouple, USB * Not suitable for human body temperature measurement * Professional IR-thermometer with dual-laser pointer in modern and handy design for fast, accurate and non-contact measurements of surface temperatures. The built-in dual-laser identifies the target area from a save distance of hot or moving objects or difficult measuring points. The USB interface unables duration measurements over a long time; the tripod guarantee stable measuring values. The unit is provided with an additional type-k input for differential and contact measurement.

$227.35